cc/td/doc/product/access/acs_mod/cismc
hometocprevnextglossaryfeedbacksearchhelp

M and C Chassis Configuration Notes and Microcode Release Notes

  • Installing the CSC-MT Enhanced Memory Card

  • Installing the Nonvolatile Memory Card Applique

  • Installing and Configuring the Hardware Type 1.1 CSC-MCI

  • Installing and Upgrading the CSC/3 Processor Card

  • Installing and Upgrading the CSC/4 Processor Card

  • Upgrading MCI Cards from Microcode Versions 1.5-1.10

  • Installing and Configuring the CSC-R16M TR Interface Card

  • Upgrading the CSC-R16M Microcode to Version 3.4

  • Installing the 10BaseT Ethernet Transceiver Applique

  • Installing the X.21 Dual-Mode Serial Applique

  • Installing and Configuring the CSC-MC+ Flash Card

  • Installing and Configuring the Dual-Port Token Ring Interface Ca

  • Installing and Configuring the Single-Port Token Ring Interface

  • Installing the High-Density V.35 Applique and Interface Cable

  • Installing the RS-232, RS-232 NRZI (SDLC), and RS-449 Synchronou

  • Installing the G.703 Applique

  • Upgrading the MAS-23 Power Supply to the MAS-28

  • Installing the MAS-28 Power Supply

  • Upgrading the MAS-21 Power Supply to the MAS-28

  • Replacing the MAS-20 Muffin Fan

  • Installing the MAS-26 Power Supply in the M Chassis

  • Installing the Slide Mount Kit on the M Chassis

  • Replacing the Multibus Backplane in the M and C Chassis

  • SCI ucode 1.4

  • Upgrading the Serial Port Communications Interface (SCI) Card to

  • Serial Port Communications Interface (SCI)

  • Microcode Release Note (AGS+, M, and C)

  • Installing and Upgrading the CSC-CCTL2 Card


    hometocprevnextglossaryfeedbacksearchhelp
    Copyright 1989-1997 © Cisco Systems Inc.