step 1: Remove rear exaust
step 2: remove output sprocket.
step 3: pull the primary cover.
step 4: pull the alternator rotor and clutch basket.
step 5: pull the cassette.
Step 6: install pickup tube. 3/8" clearance from bottom.
Now time to make some chips. Machine the gear bushings.
Facing the round stock.
preparing to use the cuttoff tool.
Boring the ID
Turning the OD
Bushing installed
machine the oil groove
Cleaned and Deburred.
reduce the distance collar oil orifices.
Finished gears. Aren't they beautiful.
Shift kit installed
