H41 Tranny - all gears are like new conditions, no chips,cracks,worn
or burnt marks. Notice the 1st gear
H41 on its side - I cleaned up painted the outside of case
H41 again on the other side - Notice there is no shifter tower that
how it came from SOR - again notice the 1st gear.
Inside of my rebuilt 3-speed transfer case - the Idle gear cluster
and high speed output gears are brandnew!
This a late 3spd xfercase after being rebuilt, it looks much better
than before! Jon K. steam-cleaned it for me. Cool guy!
Here is the inside of a '79 4-speed transfercase for comparision purpose.
Notice that the width of gears are much wider than 3-speed transfercase
in the picture above. The output shaft and high speed gear are not in the
picture. This transfer case is not rebuilt yet. Hey Jim Miller, does this
transfer look familliar? :-).