Ferrari 308QV EFI Retrofit Project
Click on image for LARGE (8Mpixel) full size image
Inside view of the intake manifold showing injector nozzles protruding
properly (I hope!) into the cavity and airstream.
Manifold reassembled with injectors (including O-rings) seated.
Plenum is now reinstalled and rear bank fuel rail pieces shown.
Notice the plenum shield has been removed from the hatch to gain
enough clearance for the 3/4 phenolic spacer.
Plumbing and Wiring complete.
Notice the reuse of the original intake pipe. Will use that
for the interim to hold the Air Cleaner and Air Temp Sensor.
It's hard to see, but bolted to the intake manifold is a jig
to allow hose clamps to hold down the fuel rail. The jig is a simple
5/16 horizontal rod, with five 3/16 vertical rods and a washer on the
bottom. Looks like a railing when all welded together.
|
|||||
| 1 2 3 4 5 | |||||