|
|
ClickStart lets you configure a Cisco 700 router for ISDN.
These pages describe how to configure a router so you can connect a small office or home PC to the Internet or another network. To configure your router using ClickStart, you do not need to learn all about networks and routers.
Take the following steps to configure a Cisco 700 series router for ISDN:
Step 1. Understand How ClickStart Works.
Step 2. Order ISDN Service.
Step 3. Click on the platform you are using (Windows 3.11 PC, Windows 95 PC, or Macintosh).
Step 4. Set Up the Router.
Step 5. Configure the Router.
<HR>
If you have comments, send e-mail to cs-html@cisco.com.
<HR>
Visit Cisco Connection Online (CCO).
|
|