|
|
These pages describe how to use ClickStart to configure a Cisco 1601 router for asynchronous serial line so you can connect a small office or home PC to the Internet or another network.
Take the following steps to configure a Cisco 1601 router for an asynchronous serial connection:
Step 1. Understand How ClickStart Works.
Step 2. Order Asynchronous Serial Service.
Step 3. Prepare to Configure an Asynchronous Serial Connection.
Step 4. Click on the platform you are using (Windows 3.11, Windows 95 PC, UNIX workstation, or Macintosh).
Step 5. Set Up the Router.
Step 6. Configure the Router.
Step 7. Test Your Router's Configuration.
If you have comments, send e-mail to cs-html@cisco.com.
<HR>
Visit Cisco Connection Online (CCO).
|
|