ClickStart for Configuring Cisco 1602 Routers

Using ClickStart, you can configure a Cisco 1602 routers so you can connect a small office or home PC to the Internet or another network.

---

Note Currently, ClickStart supports only PPP encapsulation. Support for Frame Relay encapsulation will be a future enhancement.

---

From the following list, select the WAN technology you want to configure:

• ClickStart for Configuring Cisco 1602 Routers for Frame Relay

• ClickStart for Configuring Cisco 1602 for a Leased Line Network

• ClickStart for Configuring Cisco 1602 for a Switched 56-kbps Network

<HR>

If you have comments, send e-mail to cs-html@cisco.com.

<HR>

Visit Cisco Connection Online (CCO).