|
|
Using ClickStar, you can configure a Cisco 1602 router with a serial line over a Switched 56-kbps network. so you can connect a small office or home PC to the Internet or another network.
Take the following steps to configure a Cisco 1602 router for a seral connections:
Step 1. Understand How ClickStart Works.
Step 2. Click on the platform you are using (Windows 3.11 PC, Windows 95 PC, UNIX workstation, or Macintosh).
Step 3. Set Up the Router.
Step 4. Configure the Router.
Step 5. Test Your Router's Configuration.
If you have comments, send e-mail to cs-html@cisco.com.
<HR>
Visit Cisco Connection Online (CCO).
|
|