| Symptom
| Possible Cause
| Corrective Action(s)
|
|---|
Power LED does not come on
| Power switch off
| Turn on switch
|
| Power cord not connected
| Plug in both ends of power cord
|
| Fuse blown
| Replace fuse. If the problem recurs, contact Cisco or your authorized reseller
|
| Other
| Contact Cisco or your authorized reseller
|
Link LED does not come on
| No cable inserted
| Insert both ends of cable into a device
|
| Device(s) not powered
| Ensure both devices have power
|
| Bad cable
| Replace cable with known good one
|
Disabled LED blinks
| Device at other end malfunctioning
| Investigate device at other end of cable from the disabled FastHub 112F port
|
| Bad cable
| Replace cable with known good one
|
