|
|
ClickStart lets you configure a Cisco 1003 or Cisco 1004 ISDN router. You can also use ClickStart to monitor any Cisco router.
These pages describe how to configure a router so you can connect a small office or home PC to the Internet or another network. To configure your router using ClickStart, you do not need to learn all about networks and routers.
Take the following steps to configure a Cisco 1003 or Cisco 1004 ISDN router:
Step 1. Understand How ClickStart Works.
Step 2. Order ISDN Service.
Step 3. Verify the TCP/IP configuration on your Windows 3.11, Windows 95, or Macintosh PC, or prepare to configure from a UNIX workstation.
Step 4. Set Up the Router.
Step 5. Configure the Router.
Step 6. Test Your Router's Configuration.
You can also use ClickStart to monitor any router running Cisco IOS Release 11.0(6) or later.
For detailed information about how ClickStart works, read this technical information.
<HR>
If you have comments, send e-mail to cs-html@cisco.com.
<HR>
Visit Cisco Connection Online.
|
|