|
|
This chapter describes the function and displays the syntax of XRemote commands. See the Access Services Command Reference for more information about defaults and usage guidelines.
To display XRemote connections and monitor XRemote traffic through the router, use the show xremote EXEC command.
show xremoteTo list XRemote connections and monitor XRemote traffic, use the show xremote line EXEC command.
show xremote line number| number | A decimal value representing the number of virtual terminal lines about which to display information. |
To change the buffer size used for loading font files, use the xremote tftp buffersize global configuration command. To restore the buffer size to the default value, use the no form of this command.
xremote tftp buffersize buffersize| buffersize | (Optional) Buffer size in bytes. This is a decimal number in the range from 4096 to 70000 bytes. |
To add a specific TFTP font server as a source of fonts for the terminal, use the xremote tftp host global configuration command. To remove a font server from the list, use the no form of this command.
xremote tftp host hostname| hostname | IP address or name of the host containing fonts. |
To specify the number of retries the font loader will attempt before declaring an error condition, use the xremote tftp retries global configuration command. To restore the default retries number, use the no form of this command.
xremote tftp retries retries| retries | (Optional) Number of retries. Acceptable values are decimal numbers in the range from 1 to 15. |
|
|