Table of Contents
The Command Reference Master Index
Symbols
Numerics
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Z
- This master index lists topics and commands found in the Cisco IOS 11.3 Command References.
- To access one of these topics or commands, click on the page number following the topic.
- ! characters
- ping command output FR-782
- usage in text vii
- # character
- privileged EXEC mode prompt FR-8
- $ character in regular expressions DR-823
- * character in regular expressions DR-822
- + character in regular expressions DR-822
- . character
- ping command output FR-782
- > prompt
- ROM monitor mode FR-237
- ? character in regular expressions DR-822
- ^ character in regular expressions DR-823
- ^ characters
- usage in text vii
- _ character in regular expressions DR-824
- 90-compatible OUI form BR-59, BR-95
- AAA/TACACS+
- arap authentication DR-562
- enable login authentication DR-131
- aaa accounting command SR-44
- aaa accounting suppress null-username command SR-46
- aaa accounting update command SR-47
- aaa authentication arap command SR-4
- aaa authentication enable default command SR-6
- aaa authentication local-override command SR-8
- aaa authentication login command SR-9
- aaa authentication nasi command SR-11
- aaa authentication password-prompt command SR-13
- aaa authentication ppp command SR-14
- aaa authentication username-prompt command SR-16
- aaa authorization command SR-38
- aaa authorization config-commands command SR-40
- AAA configuration
- virtual profiles, use with DR-689
- aaa new-model command SR-17, SR-41
- AAL
- displaying WR-71, WR-76, WR-79
- AAL3/4
- enabling WR-2
- enabling (example) WR-2
- AAL3/4-SMDS encapsulations
- atm pvc command WR-37
- AAL5 NLPID WR-79
- AAL5-NLPID encapsulations
- atm pvc command WR-37
- AAL5-SN WR-37
- AAL5-SNAP encapsulations
- atm pvc command WR-37
- abbreviating commands
- software recognition FR-3
- absolute DR-21
- absolute-timeout command DR-126
- accept-lifetime command P1R-466
- accept reverse charging
- X.25 WR-261
- access-class command P1R-104, DR-288, WR-216
- access control
- AppleTalk
- access group P2R-21
- distribute list P2R-37, P2R-39
- zone filter P2R-55
- zones P2R-2
- ARA DR-565, DR-566, DR-573
- DECnet P3R-126, P3R-138
- IPX P2R-216, P2R-246
- LAT
- assigning names to group lists DR-311
- connections DR-288
- defining a group list DR-317
- specifying access conditions to nodes DR-308
- VINES P3R-56 to P3R-58
- XNS
- extended P3R-346
- standard P3R-349
- access-enable command SR-114
- access-expression command BR-86
- access expressions, configuring BR-86
- access groups
- DECnet P3R-109
- IP P1R-133
- access-list (encryption) command SR-150
- access-list additional-zones command P2R-2
- access-list cable-range command P2R-4
- access list command
- with regular expressions DR-820
- (example) DR-825
- access-list command
- DECnet
- by object type P3R-100
- extended P3R-98
- standard P3R-104
- IP
- extended P1R-106, P1R-121, P1R-125
- standard P1R-115
- IPX
- extended P2R-206, P2R-229
- NLSP route aggregation summarization P2R-210
- SAP P2R-213
- standard P2R-216
- violation logging P2R-206, P2R-229
- SRB BR-88
- transparent bridging
- extended BR-4
- standard BR-7
- type-code BR-8
- type-code BR-8
- XNS
- extended P3R-346
- standard P3R-349
- access-list includes command P2R-6
- access-list nbp command P2R-8
- access-list network command P2R-11
- access-list other-access command P2R-13
- access-list other-nbps command P2R-15
- access lists
- Apollo Domain
- applying to an interface P3R-2
- creating P3R-3
- AppleTalk
- network numbers
- cable range P2R-4
- creating P2R-11
- including P2R-6
- interfaces P2R-21
- other access P2R-13
- within P2R-17
- zones, creating P2R-19
- AppleTalk, displaying P2R-111
- bridging (table) BR-809
- DDR
- dialing, controlling DR-581, DR-609, DR-637
- types and numbers, supported (table) DR-581, DR-609, DR-637
- DECnet
- extended P3R-98
- filter connect initiate packets P3R-100
- standard P3R-104
- dynamic
- temporary entries, clearing manually SR-114
- Ethernet type codes (table) BR-809
- IBM NetBIOS
- byte offset BR-186
- IP
- applying on inbound or outbound interfaces P1R-133
- BGP access list filters P1R-387, P1R-401
- extended P1R-106 to P1R-114, P1R-137
- logging message P1R-123, P1R-127, P1R-160
- named P1R-135
- setting on virtual terminal lines P1R-104
- standard P1R-115 to P1R-116
- violations, accounting for P1R-137
- violations, logging P1R-123, P1R-127, P1R-160
- IPX
- extended P2R-206
- named P2R-248
- NetBIOS P2R-298, P2R-300, P2R-392
- NLSP route aggregation P2R-210
- routing table filtering P2R-283
- SAP P2R-213
- standard P2R-216
- LSAP
- using in access expressions BR-86
- netbios-host BR-86
- SNAP type
- using in access expressions BR-86
- SRB
- Ethernet type codes (table) BR-809
- filtering by protocol type BR-88
- transparent bridging
- assigning to bridge group BR-30
- assigning to interface BR-26, BR-30
- associating with interface and bridge group BR-38
- filtering MAC addresses BR-33
- qualifications for using BR-5
- VINES
- displaying P3R-26
- extended P3R-53
- simple P3R-56
- standard P3R-58
- violations
- displaying SR-118
- (example) SR-119
- XNS
- extended P3R-346
- standard P3R-349
- access lists, AppleTalk
- zones, creating P2R-2
- access list violations
- IP
- accounting P1R-137
- displaying P1R-165
- displaying (example) P1R-166
- logging P1R-109, P1R-123, P1R-127, P1R-160
- access-list within command P2R-17
- access-list zone command P2R-19
- access-profile command SR-18
- replace command form
- (caution) SR-19
- using per-user configuration
- (caution) SR-19
- access routers
- pooling, common hostname DR-512
- access servers
- four services supported DR-125
- access-template command SR-115
- accounting
- DECnet
- database threshold P3R-113
- deleting database entries P3R-106
- enabling P3R-110
- filters P3R-111
- maximum transit entries P3R-114
- accounting, IPX
- configuring P2R-250
- database threshold P2R-253
- deleting database entries P2R-221
- enabling P2R-250
- filters P2R-252
- maximum transit entries P2R-254
- adapter command BR-718
- addresses
- alternate destinations, defining WR-263
- SMDS
- displaying assigned WR-197, WR-198
- effect of bridging WR-201
- mapping IP multicast WR-213
- multicast WR-206
- multicast ARP WR-208
- structure of WR-201
- X.121
- called, suppressing WR-316
- calling
- suppressing WR-317
- updating WR-327
- setting WR-262
- address ranges, summarizing
- IS-IS for IP P1R-301, P1R-363
- OSPF P1R-255
- address translation gateway
- See ATG, DECnet
- adjacency
- TARP blacklist
- displaying P3R-303
- setting P3R-314
- adjacency levels, IS-IS for IP, specifying P1R-342, P1R-343
- adjacent-cp-name command BR-554
- administrative distance
- BGP, setting P1R-385
- defaults (table) P1R-311, P1R-469
- IP Enhanced IGRP, setting P1R-311
- OSPF default P1R-312, P1R-469
- RIP default P1R-312, P1R-469
- administrative filtering
- statically configured stations BR-10
- ADT
- primary end of link
- specifying BR-293
- Advanced Peer-to-Peer Networking
- See APPN
- AESOs
- attaching to interfaces SR-263
- aggregate address, configuring for BGP P1R-366
- aggregate-address command P1R-366
- AIP
- configuring ATM loopback, OC3, DS3, E3 interfaces WR-62
- alias command FR-842
- aliases
- creating for commands FR-842
- default FR-842
- displaying FR-887
- all-nets flooding
- IPX P2R-276
- all-routes explorer packets
- definition BR-192
- anchoring
- regular expressions DR-823
- apollo access-group command P3R-2
- apollo access-list command P3R-3
- Apollo Domain
- access lists
- applying to an interface P3R-2
- creating P3R-3
- ARP table, displaying entries P3R-11
- interfaces, displaying status P3R-12
- load sharing P3R-5
- maximum paths, setting P3R-5
- parallel paths, choosing between P3R-5
- routing
- enabling P3R-8
- interface, enabling on P3R-6
- routing table entries
- adding P3R-7
- displaying P3R-14
- update interval P3R-9
- static routes, adding to routing table P3R-7
- traffic, displaying statistics P3R-16
- apollo maximum-paths command P3R-5
- apollo network command P3R-6
- apollo route command P3R-7
- apollo routing command P3R-8
- apollo update-time command P3R-9
- AppleTalk
- access control
- access group P2R-21
- distribute list P2R-37, P2R-39
- zone filter P2R-55
- zones P2R-2
- access lists
- cable range P2R-4
- displaying P2R-111
- interface cable range P2R-21
- network numbers P2R-21
- other access P2R-13
- range-overlaps P2R-6
- within P2R-17
- network numbers, creating P2R-11
- zones, creating P2R-2, P2R-19
- addresses
- format P2R-24
- remapping P2R-44
- adjacent networks P2R-113
- adjacent routers P2R-149
- ARP table entries
- deleting P2R-101
- displaying P2R-115
- gleaning P2R-57
- ARP table update interval P2R-25, P2R-27, P2R-29
- AURP
- enabling P2R-75
- last-heard-from timer P2R-30
- private path database P2R-118
- routing update interval P2R-31
- tunnel interface, assigning AppleTalk domain-group number P2R-41
- update-events queue P2R-117
- cable ranges
- assigning to interface P2R-32
- remapping P2R-44
- CAP
- compatibility P2R-59
- checksum P2R-33
- Columbia AppleTalk Package
- See CAP
- discovery mode P2R-35
- enabling P2R-23, P2R-32, P2R-35
- startup process P2R-35
- domain
- hop count P2R-42
- information, displaying P2R-122
- number, assigning P2R-41
- eigrp-bandwidth-percent command P2R-48
- eigrp interfaces, displaying P2R-124
- eigrp log-neighbor-changes command P2R-49
- Enhanced IGRP
- enabling P2R-75
- hello packets P2R-51
- hold time P2R-51
- neighbors
- displaying P2R-126
- query packets P2R-50
- route redistribution P2R-82
- split horizon P2R-50
- timers, adjusting P2R-51
- topology table P2R-128
- update packets P2R-50
- EtherTalk P2R-1
- extended interface
- assigning cable range P2R-32
- extended interfaces P2R-35
- fast switching P2R-81
- configuring P2R-81
- displaying cache entries P2R-120
- FDDITalk P2R-1, P2R-74
- filters
- data packet, applying P2R-21
- GZL, applying P2R-39, P2R-55
- partial zone P2R-73
- routing table P2R-37, P2R-39
- floating static routes P2R-88
- displaying P2R-162
- nonextended networks P2R-90
- free-trade zone P2R-54
- GZL
- filters P2R-39, P2R-55
- replies P2R-39, P2R-55
- hop count P2R-42
- interenterprise routing
- addresses
- remapping P2R-44
- AURP tunnel interface P2R-41
- cable ranges
- remapping P2R-44
- domain name P2R-43
- domain number P2R-43
- domains P2R-43
- hop count P2R-42
- remap
- displaying P2R-152
- remapping P2R-44
- interfaces
- configuring dynamically P2R-35
- displaying P2R-135
- domain number, assigning P2R-41
- internetwork parameters, displaying P2R-132
- IPTalk
- /etc/services file P2R-61
- IP encapsulation, configuring P2R-59
- UDP port numbers P2R-61
- Kinetics IPTalk P2R-59
- LocalTalk P2R-1
- MacIP
- addresses, allocating P2R-65, P2R-69
- clients, displaying P2R-139
- servers, displaying P2R-140
- servers, establishing P2R-67
- traffic statistics P2R-143, P2R-164
- maximum paths, defining P2R-71
- NBP
- lookup interval P2R-72
- lookup type P2R-63
- name registration table P2R-147
- registered entities P2R-197
- services, displaying P2R-145
- tests P2R-197
- neighbor table P2R-102
- network connectivity
- testing P2R-108, P2R-110
- network events, logging P2R-53
- nonextended interface, assigning address P2R-23
- Phase 1/Phase 2 networks
- compatibility P2R-77
- ping test characters (table) P2R-108
- pre-FDDITalk packets, enabling recognition P2R-74
- proxy network numbers, assigning P2R-77
- routes
- poisoned P2R-157, P2R-158
- routing P2R-83
- extended interface P2R-35
- routing protocol, specifying P2R-75
- routing table
- displaying entries P2R-155
- update timers, setting P2R-93
- routing updates
- advertising P2R-79
- retransmission, disabling P2R-87
- strict checking P2R-92
- stub mode, enabling P2R-85
- timers, setting P2R-93
- RTMP
- enabling P2R-75
- routes without zones P2R-79
- routing updates, disabling transmission P2R-87
- strict checking of routing updates P2R-92
- stub mode, enabling P2R-85
- service types (table) P2R-63
- SMDS, configuring over WR-206
- SMRP
- enabling for P2R-194
- fast-switching, enabling on a port P2R-192
- fast-switching cache table, clearing entries P2R-106
- fast-switching cache table, displaying P2R-178
- sockets P2R-160
- static routes
- displaying P2R-162
- overriding P2R-88, P2R-90
- test mode, entering P2R-197
- TokenTalk P2R-1
- traffic statistics P2R-164
- tunneling
- Cayman P2R-201
- ZIP
- query interval P2R-97
- reply filter, creating P2R-98
- zone
- assigning name P2R-99
- displaying P2R-170
- name format P2R-99
- special characters P2R-99
- Zone Information Protocol
- See ZIP
- appletalk access-group command P2R-21
- appletalk address command P2R-23
- appletalk alternate-addressing command P2R-24
- appletalk arp interval command P2R-25
- appletalk arp retransmit-count command P2R-27
- appletalk arp-timeout command P2R-29
- appletalk aurp tickle-time command P2R-30
- appletalk aurp update-interval command P2R-31
- appletalk cable-range command P2R-32
- appletalk checksum command P2R-33
- appletalk client-mode command P2R-34
- appletalk discovery command P2R-35
- appletalk distribute-list in command P2R-37
- appletalk distribute-list out command P2R-39
- appletalk domain-group command P2R-41
- appletalk domain hop-reduction command P2R-42
- appletalk domain name command P2R-43
- appletalk domain remap-range command P2R-44
- appletalk eigrp active-time command P2R-46
- appletalk eigrp-bandwidth-percent command P2R-48
- appletalk eigrp log-neighbor-changes command P2R-49
- appletalk eigrp split-horizon command P2R-50
- appletalk eigrp-timers command P2R-51
- appletalk event-logging command P2R-53
- appletalk free-trade-zone command P2R-54
- appletalk getzonelist-filter command P2R-55
- appletalk glean-packets command P2R-57
- appletalk ignore-verify-errors command P2R-58
- appletalk iptalk-baseport command P2R-61
- appletalk iptalk command P2R-59
- appletalk lookup-type command P2R-63
- appletalk macip dynamic command P2R-65
- appletalk macip server command P2R-67
- appletalk macip static command P2R-69
- appletalk maximum-paths command P2R-71
- appletalk name-lookup interval command P2R-72
- appletalk permit-partial-zones command P2R-73
- appletalk pre-fdditalk command P2R-74
- appletalk protocol command P2R-75
- appletalk proxy-npb command P2R-77
- AppleTalk Remote Access
- See ARA
- appletalk require-route-zones command P2R-79
- appletalk route-cache command P2R-81
- appletalk route-redistribution command P2R-82
- appletalk routing command P2R-83
- appletalk rtmp-stub command P2R-85
- appletalk send-rtmps command P2R-87
- appletalk static cable command P2R-90
- appletalk static cable-range P2R-88
- appletalk static cable-range command P2R-88
- appletalk static network command P2R-90
- appletalk strict-rtmp-checking command P2R-92
- appletalk timers command P2R-93
- AppleTalk Update Routing Protocol
- See AppleTalk, AURP
- appletalk virtual-net command P2R-95
- appletalk zip-query-interval command P2R-97
- appletalk zip-reply-filter command P2R-98
- appletalk zone command P2R-99
- APPN
- activating and deactivating
- activation retries, specifying BR-633, BR-634
- limited resources BR-606, BR-607
- link, activating BR-570
- link, deactivating BR-573
- port, activating BR-571
- port, deactivating BR-574
- routing, activating BR-568
- routing, deactivating BR-572
- startup connection, specifying BR-582
- subsystem, activating BR-569
- ATM link, specifying BR-575
- BTU
- maximum receive size, specifying BR-616
- maximum send size, specifying BR-588
- buffers, specifying BR-579
- capacity, specifying BR-593, BR-594
- central resource registration feature, disabling BR-580
- class of service
- defining BR-581
- specifying BR-555
- control point, specifying BR-558
- cost per byte, specifying BR-583, BR-584
- cost per connection, specifying BR-585, BR-586
- CP-CP session, permitting BR-587
- database storage BR-639, BR-640, BR-641
- destination LU, specifying BR-563
- DLUR
- permitting function BR-589
- specifying node BR-589, BR-590
- DLUS
- backup default, specifying BR-576, BR-577
- node, specifying BR-591, BR-592
- DSPU
- specifying BR-630
- Frame Relay link
- specifying BR-595
- HPR
- hpr command
- APPN
control point BR-596
link station BR-597
port BR-598
- hpr-max-sessions command BR-599
- hpr retries command BR-600
- hpr sap command BR-601
- hpr timers liveness command BR-602
- hpr timers path-switch command BR-603
- show appn link-station command BR-663
- show appn node command BR-667
- show appn port command BR-669
- show appn rtp command BR-672
- show appn session command BR-674
- show appn topology command BR-676
- ISR, enabling BR-604
- link station
- active, specifying maximum BR-614
- inbound, specifying maximum BR-631
- name, specifying BR-560
- outbound, specifying maximum BR-632
- port, specifying BR-625
- role, specifying BR-635, BR-636
- memory usage, specifying
- buffers BR-579
- cached directory entries BR-611
- cached routing trees BR-612
- maximum available BR-613
- minimum available BR-617
- mode, specifying or changing BR-562
- monitoring
- class of service BR-648
- connection network BR-651
- dependent LUs BR-655
- dependent PUs BR-657
- directory entries BR-653
- LUs BR-659
- mode BR-666
- node BR-667
- ports BR-669
- SNA sessions BR-661, BR-674
- topology BR-676
- network name, specifying BR-557, BR-647
- node row, specifying BR-620
- partner node, specifying BR-554
- ATM link BR-575
- Ethernet link BR-605
- FDDI link BR-605
- Frame Relay link BR-595
- LU-LU session BR-563
- PPP link BR-626
- QLLC BR-694
- SDLC BR-642
- SMDS address BR-679
- Token Ring link BR-605
- ports, defining BR-566
- PPP link
- specifying BR-626
- QLLC
- link, specifying BR-694
- X.25 subaddress, configuring BR-695
- queuing priority, specifying BR-608
- route selection, determining
- bit rate, specifying BR-593, BR-594
- cost per byte BR-583, BR-584
- cost per connection BR-585, BR-586
- local node BR-637
- propagation delay BR-627, BR-628
- RSRB
- configuring BR-638
- port, defining BR-566
- RTP connection
- activating BR-565
- SAP (service access point), activating BR-609
- SDLC
- link, specifying BR-642
- secondary address, configuring BR-643
- security, specifying BR-644, BR-645
- transmission group, specifying BR-680, BR-681
- transmission priority, specifying BR-683
- virtual data link control
- configuring BR-690
- port, defining BR-566
- ring-group, specifying BR-690
- virtual MAC address option, specifying BR-690
- XID, specifying BR-696, BR-697
- appn class-of-service command BR-555
- appn connection-network command BR-557
- appn control-point command BR-558
- appn link-station command BR-560
- appn mode command BR-562
- appn partner-lu-location command BR-563
- appn path-switch command BR-565
- appn port command BR-566
- appn routing command BR-568
- appn start command BR-569
- appn start link-station command BR-570
- appn start port command BR-571
- appn stop command BR-572
- appn stop link-station command BR-573
- appn stop port command BR-574
- ARA
- access control DR-565, DR-566, DR-573
- clients, connecting to virtual terminal lines DR-429, DR-438, DR-447
- monitoring DR-574
- session, automatic startup DR-536
- arap authentication command DR-562, SR-21
- using list-names
- (caution) SR-21
- arap callback command DR-724
- arap dedicated command DR-562
- arap enable command DR-564
- arap net-access-list command DR-566
- arap noguest command DR-567
- arap timelimit command DR-569
- arap use-tacacs command DR-570, SR-69
- single-line option
- (caution) SR-69
- arap warningtime command DR-572
- arap zonelist command DR-573
- area-address command P2R-219
- area authentication command P1R-250
- area default-cost command P1R-252
- area nssa command P1R-254
- area-password command P1R-338, P3R-180
- area range command P1R-255
- area stub command P1R-257
- area virtual-link command P1R-259
- ARP
- client (example) WR-12
- SMDS, enabling WR-192, WR-204, WR-206
- SMDS broadcast messages WR-208
- ARP cache
- See ARP table
- arp command WR-192
- ARP server
- (example) WR-5
- ARP table
- Apollo Domain P3R-11
- AppleTalk
- gleaning entries P2R-57
- update interval P2R-25, P2R-27, P2R-29
- LANE
- dynamic entries, clearing XR-23
- VINES P3R-61
- ASCII
- character set
- (table) FR-903
- stop character DR-62
- asp addr-offset command BR-292
- asp role command BR-293
- asp rx-ift command BR-294
- asterisk character in regular expressions DR-822
- async-bootp command DR-4, FR-272
- async default ip address command
- See peer default ip address command
- async dynamic address command DR-8
- async dynamic routing command DR-9
- asynchronous
- interfaces
- group ranges DR-17
- members DR-24
- mobility DR-406
- asynchronous interfaces
- group
- effect of peer neighbor routes DR-505
- async mode dedicated command DR-534
- async mode interactive command DR-535
- ATG
- DECnet, configuring P3R-127
- ATM
- AAL encapsulations supported WR-37
- address registration with ILMI (example) WR-3
- AIP filter register
- (example) WR-54
- configuring WR-54
- AIP on Cisco 7500 series
- loopback for OC3, DS3, E3 interfaces WR-62
- APPN partner node, specifying BR-575
- ARP client (example) WR-12
- ARP server (example) WR-5
- backward max burst size clp0 (example) WR-6
- backward max burst size clp1 (example) WR-7
- backward peak cell rate clp0 (example) WR-8
- backward peak cell rate clp1 (example) WR-9
- backward sustainable cell rate clp0 (example) WR-10
- backward sustainable cell rate clp1 (example) WR-11
- call setup WR-39
- Cisco 4500 Series
- loopback for OS3, DS3, E3 interfaces WR-62
- commands WR-1
- E.164 addresses
- (example) WR-47
- configuring WR-47
- ESI address (example) WR-16
- ESI addresses, configuring WR-15
- exception queue length (example) WR-17
- exception queue length, configuring WR-17
- forward max burst size clp0 (example) WR-18
- forward max burst size clp1 (example) WR-19
- forward peak cell rate clp0 (example) WR-20
- forward peak cell rate clp1 (example) WR-21
- forward sustainable cell rate clp0 (example) WR-22
- forward sustainable cell rate clp1 (example) WR-23
- G.832 ADM framing (example) WR-25
- idle timeout (example) WR-26
- ILMI keepalives (example) WR-27
- interfaces
- (example) WR-61
- displaying WR-70
- keepalive timer (example) WR-92
- loopback (example) WR-62
- loopback mode
- Cisco 4500 Series, OC3, DS3, E3 interfaces WR-62
- on AIP for Cisco 7500 series, OC3, DS3, E3 interfaces WR-62
- M-23 ADM framing (example) WR-24
- map class (example) WR-64
- map group (example) WR-65
- map list (example) WR-66
- map statement (example) WR-33, WR-51
- maximum number of VCs, configuring WR-28
- MIDs per virtual circuits (example) WR-29
- multicast addresses (example) WR-30
- multipoint intervals, configuring (example) WR-31
- NLPID
- encapsulation on PVC WR-37
- NSAP address WR-34
- NSAP address (example) WR-35
- permanent rate queues
- (example) WR-41
- configuring WR-41
- point-to-multipoint signaling (example) WR-32
- point-to-multipoint SVC P1R-614
- poll timer (example) WR-94
- protocol addresses, mapping (example) WR-55
- pseudobroadcasting WR-51
- PVC (examples) WR-40
- raw queue size
- (example) WR-43
- configuring WR-43
- receive buffers
- configuring WR-44
- receive buffers (example) WR-44
- scrambling (example) WR-14
- SMDS WR-47
- AAL3/4 encapsulations WR-30
- broadcast addresses WR-30
- multicast addresses WR-30
- SONET PLIM
- (example) WR-48
- configuring WR-48
- speed WR-41
- SSCOP WR-89
- SSCOP connection control timer (example) WR-91
- SSCOP receiver window (example) WR-95
- SSCOP retry count (example) WR-93
- SSCOP transmitter window (example) WR-96
- static maps
- configuring WR-66
- displaying WR-73
- subinterfaces, configuring WR-60
- SVC
- disabling WR-45
- disabling (example) WR-45
- NSAP address WR-33
- point-to-multipoint P1R-614
- traffic information, displaying WR-75, WR-76
- traffic shaping, strict
- (example) WR-46
- enabling WR-46
- transmit buffers
- (example) WR-49
- configuring WR-49
- transmit clock
- enabling (example) WR-13
- unicast addresses WR-47
- UNI version
- (example) WR-50
- configuring WR-50
- vc-per-vp (example) WR-53
- VC status, displaying P1R-656
- virtual circuits maximum (example) WR-28
- atm aal aal3/4 command WR-2
- atm address-registration command WR-3
- atm arp-server command WR-4
- atm backward-max-burst-size-clp0 command WR-6
- atm backward-max-burst-size-clp1 command WR-7
- atm backward-peak-cell-rate-clp0 command WR-8
- atm backward-peak-cell-rate-clp1 command WR-9
- atm backward-sustainable-cell-rate-clp0 command WR-10
- atm backward-sustainable-cell-rate-clp1 command WR-11
- atm class command WR-12
- atm clock internal command WR-13
- ATM-DXI
- protocols supported for maps WR-55
- requires ADSU WR-55
- atm-dest-address command BR-575
- atm ds3-scramble command WR-14
- ATM-DXI
- AAL encapsulations WR-37, WR-57
- ATM-DXI encapsulations
- (example) WR-58, WR-59
- atm esi-address command WR-15
- atm exception-queue command WR-17
- atm forward-max-burst-size-clp0 command WR-18
- atm forward-max-burst-size-clp1 command WR-19
- atm forward-peak-cell-rate-clp0 command WR-20
- atm forward-peak-cell-rate-clp1 command WR-21
- atm forward-sustainable-cell-rate-clp0 command WR-22
- atm forward-sustainable-cell-rate-clp1 command WR-23
- atm framing (DS3) command WR-24
- atm framing (E3) command WR-25
- atm idle-timeout command WR-26
- atm ilmi-keepalive command WR-27
- atm maxvc command WR-28
- atm mid-per-vc command WR-29
- atm multicast command WR-30
- atm multipoint-interval command WR-31
- atm multipoint-signaling command WR-32
- atm multipoint-signalling command WR-32
- atm nsap-address command WR-34
- atm-nsap command WR-33
- atm pvc aal5ciscoppp virtual-template command WR-36
- atm pvc command WR-36
- atm rate-queue command WR-41
- atm rawq-size command WR-43
- atm rxbuff command WR-44
- atmsig close atm command WR-45
- atm sig-traffic-shaping strict command WR-46
- atm smds-address command WR-47
- atm sonet stm-1 command WR-48
- atm txbuff command WR-49
- atm uni-version command WR-50
- atm-vc command WR-51
- atm vc-per-vp command WR-53
- atm vp-filter command WR-54
- authentication
- IP Enhanced IGRP packets P1R-313
- MD5, RIP P1R-485
- on DRP Server Agent P1R-143
- See also CHAP MD5 authentication
- See also PAP security
- authentication translate option
- mapping to virtual interface template command DR-435, DR-456
- autoconfigure, modem DR-75
- autoconfigure discovery command DR-74
- autodetect encapsulation command DR-208, DR-262
- autodetect encapsulation v120 command DR-558
- autohangup command DR-11
- automatic protocol startup
- ARA DR-536
- PPP DR-536
- SLIP DR-536
- autonomous bridging
- enabling on ciscoBus II BR-23
- autonomous switching
- SRB, enabling BR-186
- autonomous systems
- BGP providing paths to remote networks P1R-462
- boundary router P1R-263, P1R-511
- autoselect command DR-536
- auto-summary command
- BGP P1R-368
- IP Enhanced IGRP P1R-306
- RIP P1R-208
- Auxiliary Extended Security Options
- See AESOs
- backup delay command DR-656
- backup-dlus command
- APPN control point BR-576
- APPN link station BR-577
- backup interface
- Dialer Profiles DR-659
- backup interface command DR-657, DR-660
- backup load command DR-658, DR-662
- backup server table
- IPX Enhanced IGRP P2R-257
- backward explicit congestion notification
- See BECN
- backward max burst size clp0
- (example) WR-6
- backward max burst size clp1
- (example) WR-7
- backward peak cell rate clp0
- (example) WR-8
- backward peak cell rate clp1
- (example) WR-9
- backward sustainable cell rate clp0
- (example) WR-10
- backward sustainable cell rate clp1
- (example) WR-11
- bandwidth
- setting DR-186
- Bandwidth Allocation Control Protocol
- See PPP, BACP
- bandwidth command DR-186
- bandwidth on demand, DDR DR-611
- Banyan VINES
- See VINES
- baud rate
- receive, configuring for a line DR-134
- transmit, configuring for a line DR-149
- transmit and receive, configuring for a line DR-141
- X.3 PAD parameters DR-814
- Bc, committed burst size, Frame Relay WR-106
- Be, excess burst size, Frame Relay WR-108
- BECN
- bits WR-178
- BFE
- address translation WR-217, WR-250
- Blacker Emergency Mode
- entering WR-217
- leaving WR-217
- local marker facilities (table) WR-337
- mapping algorithm WR-250
- remote-red setting WR-306
- X.25 encapsulation WR-224
- bfe command WR-217
- BGP
- administrative distance, setting P1R-385
- aggregate address, configuring P1R-366
- autonomous system path P1R-426
- backdoor routes, indicating P1R-423
- community, matching P1R-393
- community attribute
- sending to a neighbor P1R-416
- setting P1R-428
- community list, creating P1R-389
- confederation P1R-372
- display routes
- allowed by a community list P1R-445
- of communities P1R-443
- enabling P1R-425
- filtering packets and routing information DR-820
- IP access (example) DR-825
- local preference value, setting P1R-531
- metric type P1R-432
- networks, specifying P1R-422
- route dampening
- configuring factors P1R-374
- dampened routes, displaying P1R-447
- dampening information, clearing P1R-380
- enabling P1R-374
- flap statistics, clearing P1R-381
- flap statistics, displaying P1R-450
- setting with a route-map P1R-430
- suppressed routes, unsuppressing P1R-380
- route filtering P1R-387, P1R-401
- route map P1R-513
- route reflector, configuring P1R-370, P1R-371, P1R-414
- route summarization P1R-208, P1R-306, P1R-368
- routing domain confederation P1R-372
- sessions, resetting immediately P1R-377
- soft reconfiguration P1R-378, P1R-417
- synchronization with IGPs P1R-462
- TCP MD5 authentication P1R-406
- timers, adjusting P1R-464
- bgp always-compare-med command P1R-369
- bgp client-to-client reflection command P1R-370
- bgp cluster-id command P1R-371
- bgp confederation identifier command P1R-372
- bgp confederation peers command P1R-373
- bgp dampening command P1R-374
- bgp default local-preference command P1R-376
- bgp fast-external-fallover command P1R-377
- Binary Synchronous Communications
- See Bisync
- Bisync
- bsc dial-contention command BR-298
- character set BR-296
- contention interfaces BR-297
- number of poll-list cycles BR-305
- polling cycle interval BR-300
- poll timeout BR-301
- primary end of link BR-302
- retries for a device BR-303
- secondary end of link BR-304
- specific polls BR-306
- Bisync enhancements
- bsc contention command BR-297
- Blacker Emergency Mode WR-265
- address translation WR-217
- entering WR-217
- leaving WR-217
- Blacker Front End
- See BFE
- Block Serial Tunneling
- See BSTUN
- boot bootldr command FR-240
- boot bootstrap command FR-242
- boot buffersize command FR-134
- boot command FR-236
- boot config command FR-135
- BOOT environment variable
- rearranging order of entries FR-247
- specifying FR-244, FR-247
- boot field
- bit settings, listing FR-254
- default values, changing FR-249, FR-251
- boot flash command FR-236
- boot host command FR-137
- booting
- configuration register FR-249, FR-251
- Flash FR-244
- checksum values FR-185
- manually FR-236
- network server FR-236
- (example) FR-237
- BOOTLDR environment variable
- specifying FR-240
- boot network command FR-139
- boot register
- See boot field
- bootstrap image
- backing up on server FR-185
- copying
- (example) FR-189
- secondary FR-242
- boot system command FR-244, FR-246
- Border Gateway Protocol
- See BGP
- Break key
- stop booting FR-247
- Break key, use in login string DR-339
- Break signals DR-813
- generating DR-382
- X.3, action upon receipt of DR-813
- bridge acquire command BR-10
- bridge address command BR-11
- bridge bridge command BR-13
- bridge circuit-group pause command BR-14
- bridge circuit-group source-based command BR-15
- bridge cmf command BR-16
- bridge crb command BR-17
- bridge domain command BR-18
- bridge forwarding database, viewing classes of entries BR-64
- bridge forward-time command BR-20
- bridge-group aging-time command BR-22
- bridge-group cbus-bridging command BR-23
- bridge-group circuit-group command BR-25
- bridge-group command BR-21
- bridge-group input-address-list command BR-26
- bridge-group input-lat-service-deny command BR-27
- bridge-group input-lat-service-permit command BR-28
- bridge-group input-lsap-list command BR-29
- bridge-group input-pattern-list command BR-30
- bridge-group input-type-list command BR-31
- bridge-group lat-compression command BR-32
- bridge-group output-address-list command BR-33
- bridge-group output-lat-service-deny command BR-34
- bridge-group output-lat-service-permit command BR-35
- bridge-group output-lsap-list command BR-36
- bridge-group output-pattern-list command BR-38
- bridge-group output-type-list command BR-39
- bridge-group path-cost command BR-40
- bridge-group priority command BR-41
- bridge groups, assigning interface to BR-15, BR-21, BR-25
- bridge-group spanning-disabled command BR-42
- bridge-group sse command BR-44
- bridge-group virtual interface (BVI) BR-62
- bridge hello-time command BR-45
- bridge irb command BR-46
- bridge lat-service-filtering command BR-47
- bridge max-age command BR-48
- bridge multicast-source command BR-49
- bridge priority command BR-50
- bridge protocol command BR-51
- bridge protocol data units
- intervals between hello BR-45
- bridge protocol ibm command BR-90
- bridge route command BR-52
- bridges
- displaying
- all global information BR-146
- logical configuration BR-147
- bridging
- X.25 WR-287
- broadcasts
- IPX
- forwarding P2R-276
- type 20 packets P2R-377, P2R-378, P2R-379
- VINES
- forwarding P3R-75
- serverless networks P3R-83
- zero-hop P3R-83
- XNS
- all-nets P3R-364
- flooding P3R-364, P3R-365, P3R-366
- in 3Com environment P3R-365
- forwarding P3R-367, P3R-370
- BSC
- Bisync enhancements
- contention BR-298
- bsc contention command BR-297
- bsc dial-contention command BR-298
- contention interfaces BR-297
- bsc-char-set command BR-296
- bsc contention command BR-297
- bsc dial-contention command BR-298
- bsc host-timeout command BR-299
- bsc pause command BR-300
- bsc poll-timeout command BR-301
- bsc primary command BR-302
- bsc retries command BR-303
- bsc secondary command BR-304
- bsc servlim command BR-305
- bsc spec-poll command BR-306
- BSTUN
- BSTUN over Frame Relay
- bstun lisnsap command BR-309
- bstun route command BR-316
- frame-relay map bstun command BR-320
- frame-relay map llc2 command BR-321
- frames, specifying BR-316
- custom queuing
- BSTUN header BR-331
- TCP port BR-332
- frames
- specifying BR-316
- frames, specifying BR-314
- group, specifying BR-307
- interface
- enabling BR-317
- peers, specifying BR-310
- protocol group, specifying BR-311
- bstun group command BR-307
- bstun keepalive-count command BR-308
- bstun lisnsap command BR-309
- bstun peer-name command BR-310
- bstun protocol-group command BR-311
- bstun route (Frame Relay) command BR-316
- bstun route command BR-314, BR-316
- buckets-of-history-kept command FR-590
- buffer-percent command BR-579
- buffers
- command history
- changing for session FR-36
- setting for a line FR-15
- configuration file
- changing size FR-134
- interface buffer pool tuning FR-707
- management parameters FR-706, FR-708
- message logging to internal FR-766
- public buffer pool tuning FR-707
- receive
- (example) WR-44
- configuring WR-44
- size, setting FR-706, FR-708
- statistics, displaying FR-735
- transmit
- (example) WR-49
- configuring WR-49
- XRemote, changing size of DR-413
- buffers command FR-706
- buffers huge size command FR-708
- burned-in address WR-239
- burst size
- backward max (example) WR-6, WR-7
- forward max (example) WR-18, WR-19
- bus-and-tag parallel channel adapter (PCA) BR-721
- busy-message command DR-290
- calendar set command FR-845
- callback
- ARA DR-724
- ARA protocol chat scripts DR-727
- dialer interface, non-DTR DR-721
- enabling for PPP client DR-726
- enabling on interface DR-719
- enabling on the EXEC DR-730
- exec chat scripts DR-729
- forcing a waiting period DR-725
- PPP, client or server DR-721
- secure DR-718
- callback forced-wait command DR-725
- caller ID screening DR-732
- configuring DR-156, DR-233, DR-734
- platform support DR-156, DR-233, DR-734
- call setup
- ATM, configuring WR-39
- call user data
- See CUD
- CAP
- compatibility P2R-59
- carrier wait time
- DDR
- interface disabling DR-624
- map class DR-646
- cas-group command DR-209, DR-211
- cautions
- access-profile command
- replace command form (caution) SR-19
- using per-user configuration (caution) SR-19
- arap authentication command
- using list-names (caution) SR-21
- arap use-tacacs command
- single-line option (caution) SR-69
- enable password command
- using encryption-type (caution) SR-237
- enable secret command
- using encryption-type (caution) SR-239
- enable use-tacacs command
- using tacacs-server authenticate enable command (caution) SR-72
- key config-key command
- unrecoverable DES key (caution) SR-104
- login authentication command
- using list-names (caution) SR-22
- nasi authentication command
- using list-names (caution) SR-25
- ppp authentication command
- using list-names (caution) SR-27
- ppp use-tacacs command
- single-line option (caution) SR-35
- service password-encryption command
- security level (caution) SR-248
- usage in text vii
- Cayman tunneling
- AppleTalk P2R-201
- CCL scripts, using modified and unmodified together DR-537
- CCO
- accessing viii
- definition viii
- cd command FR-180
- CDP
- enabling and disabling for routing device FR-594
- enabling on an interface FR-592
- global information, displaying FR-628
- interface status information, displaying FR-631
- neighbor
- information, displaying FR-632
- table, clearing FR-597
- neighbor device, displaying information FR-629
- traffic counters, clearing FR-596
- traffic information, displaying FR-634
- transmission hold time, configuring FR-593
- transmission timer, setting FR-595
- cdp enable command FR-592
- cdp holdtime command FR-593
- cdp run command FR-594
- cdp timer command FR-595
- cell rate
- backward peak (example) WR-8, WR-9
- backward sustainable (example) WR-10, WR-11
- forward peak (example) WR-20, WR-21
- forward sustainable (example) WR-22, WR-23
- central resource registration
- disabling BR-580
- central-resource-registration command BR-580
- CGMP
- clearing P1R-562
- enabling P1R-572
- proxy P1R-572
- Challenge Handshake Authentication Protocol
- See CHAP
- channel-group command DR-213
- Channel Interface Processor
- See CIP
- channelized E1
- channel groups DR-213
- controller, statistics DR-218, DR-251
- loopback
- local, interface DR-245
- channelized T1
- channel groups DR-213
- controller
- descriptive name DR-223
- loopback
- local, entire line DR-244
- local, interface DR-245
- remote, interface DR-247
- channel-protocol command BR-720
- CHAP
- authentication method DR-506
- rotary, common alias for routers DR-512
- username and password, specifying DR-531
- using with DDR DR-616
- character mapping
- creating DR-392
- determining DR-371
- displaying DR-372
- characters in regular expressions
- $ character DR-821
- * character DR-821
- + character DR-821
- . character DR-821
- ? character DR-821
- ^ character DR-821
- _ character DR-821
- chat-script command DR-584
- regular expressions DR-820
- (example) DR-825
- chat scripts
- ARA protocol-callback DR-727
- backward compatibility, SLIP and PPP DR-552
- DDR DR-588
- escape sequences
- (table) DR-585
- example DR-825
- EXEC callback DR-729
- expect-send pairs
- sample (table) DR-586
- naming conventions DR-584, DR-588
- physical terminal lines, using on DR-38, DR-727, DR-729
- starting
- because of incoming connections DR-40
- from the EXEC DR-60
- manually for a line DR-60
- on line activation DR-38
- on line reset DR-42
- on system startup DR-44
- writing DR-584
- checksums
- AppleTalk P2R-33
- ISO CLNS P3R-192
- system images, verifying FR-185
- chunk size, configuring IP DR-297
- CIP
- adapter, configuring BR-718
- channel-protocol, defining transmit rate BR-720
- CLAW, configuring BR-721
- CMPC
- cmpc command BR-727
- show extended channel cmpc command BR-757
- show extended channel tg command BR-769
- tg command BR-799
- CSNA, configuring BR-729
- DLUR, configuring BR-731
- DLUS backup, configuring BR-732
- extended channel statistics, showing BR-762
- generic pool, assigning BR-733
- ICMP stack, showing BR-759
- idle time, defining BR-735
- interface channel, configuring BR-736
- interfaces
- configuring BR-721
- showing BR-793
- internal LAN, configuring BR-742
- IP stack, showing BR-760
- keepalive, defining interval BR-740
- link, defining to host BR-743
- LLC2 parameters, showing BR-761
- LSAP, defining in SNA session switch BR-745
- LU sessions, limiting BR-723
- maximum LUs, configuring BR-748
- naming the internal adapter BR-750
- offload, configuring BR-751
- PCA, configuring BR-720
- preferred network node server, defining BR-753
- PU entity
- direct connection, configuring BR-755
- DLUR, configuring BR-754
- shutdown BR-797
- subchannel, showing BR-765
- TCP
- port, configuring BR-798
- stack, showing BR-768
- timing-mark function, configuring BR-802
- TN3270 server
- client IP address, showing BR-777
- configuring BR-801
- DLUR, showing BR-780
- DLUR link, showing BR-782
- PU, showing BR-785
- PU LU, showing BR-788
- showing BR-774
- UDP listeners, showing BR-791
- UDP stack, showing BR-792
- unbind action, configuring BR-803
- VRN, configuring BR-804
- CIPX DR-545
- Cisco 2520 through 2523 routers
- low-speed serial interfaces, physical layer DR-35
- Cisco 4500 Series
- ATM loopback, OC3, DS3, E3 interfaces WR-62
- ciscoBus II, enabling autonomous bridging on BR-23
- Cisco Connection Online
- See CCO
- Cisco Discovery Protocol
- See CDP
- Cisco-supported RFCs
- (table) FR-911
- class command
- map-list configuration WR-98
- virtual circuit configuration WR-100
- class-of-service command BR-581
- claw command BR-721
- clear access-list counters command P1R-117
- clear access-template command SR-117
- clear appletalk arp command P2R-101
- clear appletalk neighbor command P2R-102
- clear appletalk route command P2R-103
- clear appletalk traffic command P2R-104
- clear atm vc command XR-22
- clear bridge command BR-53
- clear bridge multicast command BR-54
- clear cdp counters command FR-596
- clear cdp table command FR-597
- clear clns cache command P3R-181
- clear clns es-neighbors command P3R-182
- clear clns is-neighbors command P3R-183
- clear clns neighbors command P3R-184
- clear clns route command P3R-185
- clear controller command DR-214
- clear crypto connection command SR-159
- clear decnet accounting command P3R-106
- clear decnet counters command P3R-108
- clear dialer command DR-592, DR-598
- clear dlsw circuit command BR-230
- clear dlsw reachability command BR-231
- clear dlsw statistics command BR-232
- clear entry command DR-291
- clear frame-relay-inarp command WR-102
- clear ip accounting checkpoint command P1R-118
- clear ip bgp command P1R-378
- clear ip bgp dampening command P1R-380
- clear ip bgp flap-statistics command P1R-381
- clear ip bgp peer-group command P1R-382
- clear ip cgmp command P1R-562
- clear ip drp command P1R-119
- clear ip dvmrp route command P1R-563
- clear ip eigrp neighbors command P1R-307, P1R-563
- clear ip flow stats command XR-2
- clear ip igmp group command P1R-564
- clear ip mroute command P1R-565
- clear ip nat translation command DR-774
- clear ip pim auto-rp command P1R-566
- clear ip route command P1R-468
- clear ip rtp header-compression command P1R-567
- clear ip sdr command P1R-568
- clear ip sse command P1R-120
- clear ipx accounting command P2R-221
- clear ipx cache command P2R-223
- clear ipx nhrp command P2R-224
- clear ipx nlsp neighbors command P2R-225
- clear ipx route command P2R-227
- clear kerberos creds command SR-90
- clear lane le-arp command XR-23
- clear lane server command XR-25
- clear line EXEC command DR-12
- clear logging command FR-752
- clear modem at-mode command DR-65
- clear modem command DR-64
- clear modem counters command DR-66
- clear ncia circuit command BR-700
- clear ncia client command BR-701
- clear ncia client registered command BR-702
- clear netbios-cache command BR-91
- clear rif-cache command BR-92
- clear smrp mcache command P2R-106
- clear snapshot quiet-time command DR-738
- clear source-bridge command BR-93
- clear sse command BR-55, BR-94
- clear tarp counters command P3R-186
- clear tarp ldb-table command P3R-187
- clear tarp tid-table command P3R-188
- clear tcp statistics command P1R-120
- clear vines cache command P3R-20
- clear vines ipc command P3R-21
- clear vines neighbor command P3R-22
- clear vines route command P3R-23
- clear vines traffic command P3R-24
- clear vlan statistics command BR-56
- clear vpdn tunnel command DR-748
- clear x25 command WR-218
- clear x25-vc command
- See clear x25 command
- clear xot command WR-220
- client-atm-address command XR-27
- client command BR-723, BR-725
- CLNS
- See ISO CLNS
- clns access-group command P3R-189
- clns adjacency-filter command P3R-191
- clns checksum command P3R-192
- clns cluster-alias command P3R-193
- clns configuration-time command P3R-194
- clns congestion-threshold command P3R-195
- clns dec-compatible command P3R-196
- clns enable command P3R-197
- clns erpdu-interval command P3R-198
- clns esct-time command P3R-199
- clns es-neighbor command P3R-200
- clns filter-expr command P3R-201
- clns filter-set command P3R-203
- clns holding-time command P3R-205
- clns host command P3R-206
- clns is-neighbor command P3R-208
- clns mtu command P3R-209
- clns net command P3R-210, P3R-211
- clns packet-lifetime command P3R-212
- clns rdpdu-interval command P3R-213
- clns route-cache command P3R-216
- clns route command P3R-214, P3R-215, P3R-218
- clns route default command P3R-217
- clns router isis command P3R-219
- clns router iso-igrp command P3R-220
- clns routing command P3R-221
- clns security-passthrough command P3R-222
- clns send-erpdu command P3R-223
- clns send-rdpdu command P3R-224
- clns split-horizon command P3R-225
- clns template-alias command P3R-227
- clns want-erpdu command P3R-229
- clock
- transmit (example) WR-13
- clock calendar-valid command FR-846
- clock rate command DR-187
- clock rate examples DR-188
- clock read-calendar command FR-847
- clock set command FR-848
- clock signal
- inverting DR-199
- clock source (controller) command DR-215
- clock source command DR-217
- interface configuration DR-189
- clock source line command DR-215
- clock summer-time command FR-849
- clock ticks
- IPX P2R-269
- clock timezone command FR-851
- clock update-calendar command FR-852
- cluster aliases
- ISO CLNS P3R-193
- CMNS
- enabling WR-221
- LLC2 statistics WR-244
- local X.25 routing on nonserial media WR-221
- restarting WR-218
- traffic statistics, displaying WR-239
- X.25 routing WR-311
- cmns enable command WR-221
- cmpc command BR-727
- Columbia AppleTalk Package
- See CAP
- Combinet devices
- protocols supported DR-227, DR-271
- Combinet Proprietary Protocol
- See CPP
- command alias
- See aliases
- command history
- buffer size
- changing for session FR-36
- setting for a line FR-15
- displaying previous commands FR-30
- recalling commands FR-30
- command modes
- exiting FR-10
- global configuration FR-141
- privileged EXEC FR-8
- commands
- abbreviating FR-3
- ATM WR-1
- history
- See command history
- mapping old to new
- (table) FR-133, FR-159, FR-271
- mapping old to new (table) FR-179
- command syntax
- document conventions vii
- help FR-13
- Common Command Language (CCL) DR-537
- community access string
- setting for SNMP FR-675
- complete sequence number PDU
- See CSNP
- compress command DR-190
- compressed system images
- booting FR-247
- compression
- LAPB DR-190
- packet-by-packet, X.25 BR-83, BR-453, WR-284
- PPP DR-492
- RAND compression algorithm DR-190
- specifying for LAT packets BR-32
- TCP packet header WR-289
- compress predictor command DR-190, DR-492
- compress stac command DR-190
- concurrent routing and bridging, enabling BR-17
- conditional default origination, IS-IS P1R-339
- CONFIG_FILE environment variable
- specifying FR-135
- config-register command FR-249
- configuration files
- active, displaying FR-151
- buffer, changing size FR-134
- compressing FR-145
- copying from rcp server
- (example) FR-193
- host
- default filename FR-147
- loading from a server FR-137, FR-147
- loading FR-140
- network
- default filename FR-147
- loading from a server FR-147
- network server, storing FR-186
- NVRAM
- displaying file FR-152
- erasing FR-144
- rcp server
- copying FR-184
- copying from (example) FR-193
- saving
- CONFIG_FILE environment variable FR-186
- NVRAM FR-186
- configuration mode
- exiting FR-9
- configuration register
- streamlined setup facility FR-41
- configuration synchronization
- See HSA
- configure command FR-141
- configure network command
- See copy rcp command, copy tftp command
- configure overwrite-network command
- See copy command
- See copy rcp command
- See copy tftp command
- confreg command FR-251
- congestion threshold
- DECnet P3R-119
- ISO CLNS P3R-195
- connect-at-startup command BR-582
- connect command DR-292, DR-306, DR-379, SR-91
- Connection-Mode Network Service
- See CMNS
- connections
- displaying open DR-407, DR-482
- escaping from DR-341, DR-476
- LAT DR-306 to DR-307
- mobile remote node DR-406
- NASI clients, connecting to DR-666
- NetBEUI DR-55
- enabling DR-34
- notification of pending output DR-340
- PPP DR-550
- refusing full duplex DR-383
- resuming DR-36
- reverse DR-26, DR-30
- rlogin DR-343, DR-344, DR-378 to DR-380
- SLIP DR-554
- switching between DR-36
- Telnet DR-378 to DR-381
- Telnet, configuring a line DR-384
- TN3270 DR-389
- viewing the status of TCP DR-364
- X.3 PAD DR-483
- XRemote DR-408, DR-412, DR-416
- console
- logging messages FR-767
- console port, configuring DR-22
- constrained multicast flooding
- enabling BR-16
- multicast state information
- clearing BR-54
- multicast state information, displaying BR-70
- contact string
- setting for SNMP FR-677
- continue command FR-253
- controller command DR-218
- copy bootflash rcp command FR-192
- copy bootflash tftp command FR-192
- copy command FR-181
- copy commands
- invalid combinations FR-183
- copy erase flash command
- See erase flash command
- copy flash rcp command FR-191
- copy flash tftp command FR-191
- copy modem command DR-67
- copy mop flash command FR-185, FR-188, FR-190
- copy rcp command FR-181
- copy rcp flash command
- (example) FR-188, FR-189
- copy rcp running-config command FR-193
- copy rcp startup-config command FR-193
- copy tftp flash command
- (example) FR-188, FR-189
- copy verify bootflash
- See verify bootflash
- copy verify bootflash command
- See verify bootflash command
- copy verify command
- See verify command; verify flash command
- copy verify flash command
- See verify command; verify flash command
- copy xmodem command FR-162
- copy ymodem command FR-163
- cost
- assigning to DECnet P3R-122
- modifying default for transparent bridging BR-40
- cost-per-byte command
- APPN
- link station BR-583
- APPN port BR-584
- cost-per-connect-time command
- APPN
- link station BR-585
- port BR-586
- counters
- DECnet P3R-108
- TARP, clearing P3R-186
- cp-cp-sessions-supported command BR-587
- CPP
- and PPP support DR-263
- authentication, negotiating with DR-220, DR-263
- callback, accepting DR-222, DR-264
- encapsulation DR-227, DR-271
- half-bridging DR-227, DR-271
- PPP support DR-220
- cpp authentication command DR-220, DR-222, DR-263, DR-264
- usernames and passwords used DR-220
- crc4 command DR-192
- crypto algorithm 40-bit-des command SR-161
- crypto algorithm des command SR-163
- crypto clear-latch command SR-165
- crypto esa command SR-166
- crypto gen-signature-keys command SR-168
- crypto key-exchange command SR-171
- crypto key-exchange passive command SR-173
- crypto key-timeout command SR-175
- crypto map (global configuration) command SR-176
- crypto map (interface configuration) command SR-178
- crypto pregen-dh-pairs command SR-179
- crypto public-key command SR-181
- crypto sdu connections command SR-183
- crypto sdu entities command SR-185
- crypto zeroize command SR-187
- csna command BR-729
- CSNA path BR-729
- CSNP
- IS-IS, configuring interval P3R-237
- See also NLSP, CSNP
- CUD
- interpreting calls with unknown WR-266
- placing in routing table WR-263, WR-308
- custom-queue-list command FR-709
- data communications equipment
- See DCE
- data compression DR-190
- Data Exchange Interface
- See DXI 3.2
- datagram encapsulation
- alternate destination addresses WR-263
- data-link switching
- See DLSw+
- data size
- RTR FR-608, FR-609
- data terminal equipment
- See DTE, X.25 timers
- data terminal ready
- See DTR
- DCE
- Frame Relay device WR-160
- X.25 timers
- T10 restart indication WR-318
- T11 incoming call WR-319
- T12 reset indication WR-320
- T13 clear indication WR-321
- dce-terminal-timing enable command DR-194
- DDN
- local marker facilities (table) WR-337
- X.121 address caution WR-225
- X.25 encapsulation WR-224
- DDR
- backups with floating-static routes P2R-344
- bandwidth on demand DR-611
- carrier wait time
- specifying for interface DR-624
- specifying for map class DR-646
- chat scripts DR-588
- sample expect-send pairs (table) DR-586
- writing DR-584
- clearing dialer interface statistics DR-592, DR-598
- controlling dialing
- by protocol DR-580, DR-608, DR-636
- by protocol and access list DR-580, DR-608, DR-636
- diagnostics for interface
- displaying DR-173
- diagnostics for interface, displaying DR-626, DR-649
- dialer hold queue
- and rotary groups DR-604
- dialers supported DR-604
- dialer pool, ISDN B channels
- maximum number DR-642
- minimum number DR-642
- dialer profile
- CHAP or PAP, username DR-644
- dialer interface data, displaying DR-173, DR-626, DR-649
- dialer pool, members DR-642
- dialer pool, specifying DR-640
- dialer pool and dialer pool-member (example) DR-640
- links, maximum number DR-639
- link to physical interface DR-642
- specifying DR-644
- dialer rotary groups
- assigning interfaces DR-619
- setting interface priority DR-618
- dialing pool
- dialer profile DR-640
- DTR dialing
- not for rotary group (hunt group) leaders DR-593, DR-599
- outgoing calls only DR-593, DR-599
- receiving calls from DR-593, DR-599
- remote interface passive DR-593, DR-599
- remote interface to terminate calls DR-593, DR-599
- show dialer display DR-628, DR-651
- floating-static routes P2R-344
- identifying best line DR-621
- idle time, line DR-605
- idle time, map-class DR-634
- interface timeout, setting DR-600
- IPX
- spoofing watchdog packets P2R-368
- watchdog packets P2R-368, P2R-384
- legacy
- assigning dial string-telephone number DR-622
- calls to single site, dial string DR-595, DR-622
- dialer map
- ISDN interfaces DR-270
- dialer map, for outbound calls DR-613
- dialer map, ISDN interfaces DR-267
- enabling DR-594, DR-606
- forwarding broadcasts DR-266, DR-269
- ISDN Advice of Charge, BRI (example) DR-267
- snapshot routing DR-739
- specifying one telephone number DR-595
- outbound calls, identifying best line DR-621
- protocol address for broadcasts DR-614
- setting dialer load threshold DR-611
- single DDR telephone number DR-622, DR-645
- SPX
- spoofing of watchdog packets P2R-369
- supported access list types and numbers (table) DR-581, DR-609, DR-637
- telephone number to call
- specifying single DR-595
- DE
- See Frame Relay, DE
- debug messages
- displaying enabled FR-794
- debug serial-interface command DR-531
- DEC LAT
- See LAT
- DECnet
- access groups P3R-109
- access list (example) DR-825
- access lists P3R-98, P3R-100, P3R-104
- accounting
- database entries, deleting P3R-106
- database threshold P3R-113
- disabling P3R-110
- enabling P3R-110
- filters P3R-111
- maximum transit entries P3R-114
- associate name P3R-125
- ATG limitations P3R-127
- cluster alias configuration P3R-193
- congestion threshold P3R-119
- conversion, Phase IV to Phase V P3R-120
- cost value for interface P3R-122
- default route, on interface P3R-145
- designated router P3R-149
- end systems P3R-149
- equal cost paths P3R-133, P3R-139
- extended access lists P3R-98
- fast switching P3R-148
- filtering packets and routing information DR-820
- filters
- on hello messages P3R-126
- on object numbers (table) P3R-102
- on routing information P3R-126
- hello timer P3R-124
- hop count P3R-118
- host name mapping P3R-125
- interarea routing cost P3R-117
- intra-area routing cost P3R-131
- Level 1 routing P3R-137
- Level 2 routing P3R-137
- maximum packet visits P3R-134
- node addresses P3R-129
- node type P3R-137
- OSI backbone, propagating Phase IV areas P3R-115
- path selection P3R-133
- Phase IV/Phase IV Prime on same LAN P3R-149
- Phase IV Prime
- displaying adjacencies P3R-170
- enabling P3R-151
- inherent MAC addresses P3R-97
- MAC addressing advantages P3R-151
- packets sent to Unknown Destination multicast P3R-150
- Phase IV through OSI backbone, advertising P3R-115
- Phase IV-to-Phase V conversion P3R-120
- ping field descriptions (table) P3R-158
- ping test characters (table) P3R-157, P3R-159
- propagate static route P3R-140
- protocol keywords, SMDS multicast address WR-206
- route default P3R-147
- routing P3R-151
- cost P3R-117, P3R-131
- table size P3R-130
- routing updates P3R-154
- SMDS, configuring over WR-206
- static routes
- creating P3R-143
- displaying P3R-173
- on interface P3R-141
- timers P3R-124, P3R-153
- Token Ring
- configuring on P3R-123
- encapsulation over P3R-123
- decnet access-group command P3R-109
- decnet accounting command P3R-110
- decnet accounting list command P3R-111
- decnet accounting threshold command P3R-113
- decnet accounting transits command P3R-114
- decnet advertise command P3R-115
- decnet area-max-cost command P3R-117
- decnet area-max-hops command P3R-118
- decnet congestion-threshold command P3R-119
- decnet conversion command P3R-120
- decnet cost command P3R-122
- decnet encapsulation command P3R-123
- decnet hello-timer command P3R-124
- decnet host command P3R-125
- decnet in-routing-filter command P3R-126
- decnet map command P3R-127
- decnet max-address command P3R-129
- decnet max-paths command P3R-133
- decnet max-visits command P3R-134
- decnet multicast-map command P3R-135
- decnet node-type command P3R-137
- decnet out-routing-filter command P3R-138
- decnet path-split-mode interim command P3R-139
- decnet path-split-mode normal command P3R-139
- decnet propagate static command P3R-140
- decnet route-cache command P3R-148
- decnet route command P3R-141, P3R-143, P3R-145
- decnet route default command P3R-147
- decnet router-priority command P3R-149
- decnet routing command P3R-151
- decnet split-horizon command P3R-154
- DEC spanning-tree protocol
- specifying use of BR-51
- dedicated line, configuring DR-563
- default-information command
- IGRP P1R-228
- IP Enhanced IGRP P1R-308
- default-information originate command
- BGP P1R-383
- IS-IS P1R-339
- OSPF P1R-262
- RIP P1R-209
- default-metric command
- BGP P1R-384
- IGRP P1R-229
- IP Enhanced IGRP P1R-309
- OSPF P1R-264
- RIP P1R-210
- default-name command XR-29
- default networks, specifying P1R-475
- default routes
- IP P1R-475
- IP Enhanced IGRP P1R-228, P1R-308
- IS-IS for IP P1R-262, P1R-339
- OSPF P1R-262, P1R-339
- See also NLSP, default routes
- Defense Data Network
- See DDN
- delete command FR-199
- delta
- PPP BACP negotiations
- telephone number change DR-703
- deny command P1R-121, SR-189
- IPX
- SAP filtering P2R-234
- standard P2R-236
- summary P2R-232
- deny command (extended) P2R-229
- deny command (SAP filtering) P2R-234
- deny command (standard) P2R-236
- deny command (summary) P2R-232
- dependent logical unit requestor
- See DLUR
- dependent logical unit server
- See DLUS
- description command (controller) DR-223
- description command (interface) DR-195, DR-224
- designated routers
- IS-IS for CLNS, specifying election P3R-242
- IS-IS for IP, specifying election P1R-350
- desired-max-send-btu-size command BR-588
- destination routing table
- ISO CLNS, displaying P3R-341
- DHCP
- IP address pooling DR-495
- show settings DR-524
- specifying server DR-497
- dial backup
- Dialer Profiles DR-659 to DR-662
- line delay
- setting DR-656
- secondary line
- selecting DR-657, DR-660
- traffic load threshold
- setting DR-658, DR-662
- dialer DR-594, DR-606
- dialer callback-secure command DR-718
- dialer callback-server command DR-719
- dialer caller command DR-732
- dialer dtr command DR-593, DR-599
- dialer enable-timeout command DR-600
- dialer fast-idle command DR-601
- interface configuration DR-601
- map-class configuration DR-632
- dialer group
- assigning interface DR-603, DR-633
- dialer-group command DR-603, DR-633
- dialer hold queue
- dialers supported DR-604
- rotary groups DR-604
- dialer hold-queue command DR-604
- dialer idle-timeout command DR-605
- interface configuration DR-605
- map-class configuration DR-634
- dialer in-band command DR-594, DR-606
- dialer interface
- clearing statistics DR-592
- dial backup
- Dialer Profiles DR-659
- dialer interface, clearing statistics DR-598
- dialer isdn command DR-635
- dialer isdn short-hold command DR-265
- dialer isdn spc command DR-635
- dialer isdn speed command DR-635
- dialer-list protocol command DR-580, DR-608, DR-636
- dialer load-threshold command DR-611
- multilink PPP and idle timers DR-515, DR-605, DR-612, DR-709
- dialer map
- map class name DR-248
- dialer map, defining configuration parameters for DR-648, DR-720
- dialer map bridge command DR-613
- dialer map class, for ISDN Advice of Charge DR-266
- dialer map command DR-266, DR-269, DR-613
- form used for ISDN Advice of Charge DR-266
- form used for ISDN semipermanent connections DR-269
- ISDN Advice of Charge, usage guidelines DR-267
- ISDN semipermanent connections DR-613
- no effect on DTR dialing DR-593, DR-599
- regular expressions DR-820
- dialer map snapshot command DR-739
- dialer max-link command DR-639
- dialer pool
- Dialer Profiles, backup interfaces DR-659
- dialer pool command DR-640
- dialer pool-member command DR-642
- dialer priority command DR-618
- Dialer Profiles
- dial backup DR-659 to DR-662
- dialer remote-name command DR-644
- dialer rotary-group command DR-619
- dialer rotary groups
- assigning interfaces DR-619
- defining DR-625, DR-647
- setting interface priority DR-618
- dialer rotor command DR-621
- dialer string class command DR-645
- dialer string command DR-595, DR-622, DR-645
- DDR, dialer profiles DR-645
- legacy DDR DR-595, DR-622
- no effect on DTR dialing DR-593, DR-599
- dialer wait-for-carrier-time command
- interface configuration DR-624
- map-class configuration DR-646
- dial-on-demand routing
- See DDR
- dial string (telephone number), specifying DR-595, DR-622, DR-645
- dir command FR-201
- direct encapsulation, configuring SRB for BR-219, BR-445
- disable command FR-4
- disconnect command DR-295
- disconnect warning time, setting DR-572
- discovery mode P2R-35
- enabling P2R-23, P2R-32, P2R-35
- startup process P2R-35
- diskless boot
- configuring FR-275
- dispatch-timeout command DR-140
- distance bgp command P1R-385
- distance command P1R-469, P3R-230
- distance eigrp command P1R-311
- Distance Vector Multicast Routing Protocol
- See DVMRP
- distributed compression WR-142, WR-151
- DistributedDirector
- enabling DRP Server Agent P1R-144
- distribute-list in command P1R-471, P2R-238
- distribute-list out command P1R-473, P2R-240
- distribute-sap-list in command P2R-242
- distribute-sap-list out command P2R-244
- distributions-of-statistics-kept command FR-598
- DLCI
- forwarding broadcasts to WR-145, WR-146
- interface statistics, displaying WR-189
- local (source), setting WR-141
- multicast mechanism
- configuring WR-146
- displaying statistics about WR-189
- protocol address, mapping to WR-142
- using for bridging (example) WR-144
- DLSw+
- configuring service access points BR-243
- duplicate MAC addresses BR-240
- fault-tolerance BR-240
- load-balancing BR-240
- local peer, defining BR-248
- Multiple Bridge Groups
- defining BR-237
- QLLC, connecting with BR-455
- static MAC address, configuring BR-250
- static NetBIOS name, configuring BR-253
- dlsw allroute-netbios command BR-233
- dlsw allroute-sna command BR-234
- dlsw bgroup-list command BR-235
- dlsw bridge-group command BR-236
- dlsw disable command BR-239
- dlsw duplicate-path-bias command BR-240
- dlsw group cache disable command BR-241
- dlsw group-cache max entries command BR-242
- dlsw icannotreach saps command BR-243
- dlsw icanreach command BR-244
- dlsw llc2 nornr command BR-246
- dlsw local-peer command BR-248
- dlsw mac-addr command BR-250
- dlsw netbios-keepalive-filter command BR-252
- dlsw netbios-name command BR-253
- dlsw peer-on-demand-defaults command BR-255
- dlsw port-list command BR-257
- dlsw prom-peer-defaults command BR-258
- dlsw remote-peer frame relay command BR-260
- dlsw remote-peer fst command BR-263
- dlsw remote-peer interface command BR-265
- dlsw remote-peer tcp command BR-268
- dlsw ring-list command BR-272
- dlsw timer command BR-273
- dlsw udp-disable command BR-275
- DLUR, APPN support BR-589, BR-590
- dlur command BR-589, BR-731
- dlur-dspu-name command BR-590
- DLUS, APPN support BR-591, BR-592
- dlus-backup command BR-732
- dlus command
- APPN
- control point BR-591
- link station BR-592
- DNS
- enabling for rcp and rsh FR-276
- ISO CLNS addresses P3R-233
- DNSIX
- collection center, specifying SR-257
- enabling SR-260
- hosts that receive messages
- alternate SR-259
- primary SR-258
- number of records in a packet, specifying SR-261
- retransmit count SR-256
- dnsix-dmdp retries command SR-256
- dnsix-nat authorized-redirection command SR-257
- dnsix-nat primary command SR-258
- dnsix-nat secondary command SR-259
- dnsix-nat source command SR-260
- dnsix-nat transmit-count command SR-261
- dollar sign character in regular expressions DR-823
- Domain
- See Apollo Domain
- domain, assigning BR-18
- Domain Name System
- See DNS
- domain-password command P1R-340, P3R-231
- downstream physical unit
- See DSPU
- downward-compatible-config command FR-853
- DRP Server Agent
- enabling P1R-144
- DSPU
- activating BR-497
- activation request units, defining BR-458
- default PU, defining BR-459
- Ethernet address
- enabling BR-464
- for use by, defining BR-488
- Ethernet interface
- host, defining BR-473
- upstream host BR-461
- FDDI address for use by, defining BR-488
- Frame Relay
- address for use by, enabling BR-464
- interface
- host, defining BR-467
- PU, defining BR-482
- upstream host BR-461
- LAN, defining BR-507
- location of router, specifying BR-508
- LU
- defining BR-475
- pool, defining BR-480
- monitoring BR-509
- NCIA
- address for use by, defining BR-488
- connection
- SAP, enabling for downstream PU BR-478
- server configuration BR-477
- notification level, specifying BR-479
- QLLC data link
- downstream PU, defining BR-484
- host, defining BR-469
- upstream host BR-462
- RSRB
- address for use by, defining BR-488
- connection
- activating BR-495
- host, defining BR-473
- service access point, enabling for downstream PU BR-494
- RSRB connection
- service access point, enabling for upstream host BR-493
- virtual ring, defining BR-491
- SDLC
- address for use by, enabling BR-466
- data link
- downstream PU, defining BR-486
- host, defining BR-471
- upstream host BR-463
- Token Ring address for use by
- defining BR-488
- enabling BR-464
- Token Ring interface
- host, defining BR-473
- upstream host BR-461
- virtual data link control address for use by, defining BR-488
- virtual data link control connection
- activating BR-505
- service access point, enabling for downstream PU BR-503
- service access point, enabling for upstream host BR-501
- virtual ring, defining BR-499
- X.121 subaddress for use by, enabling BR-465
- dspu activation-window command BR-458
- dspu default-pu command BR-459
- dspu enable-host command
- Ethernet BR-461
- Frame Relay BR-461
- QLLC BR-462
- SDLC BR-463
- Token Ring BR-461
- dspu enable-pu command
- Ethernet BR-464
- Frame Relay BR-464
- SDLC BR-466
- Token Ring BR-464
- dspu host command
- Ethernet BR-473
- Frame Relay BR-467
- QLLC BR-469
- RSRB BR-473
- SDLC BR-471
- Token Ring BR-473
- dspu lu command BR-475
- dspu ncia command BR-477
- dspu ncia enable-pu command BR-478
- dspu notification-level command BR-479
- dspu pool command BR-480
- dspu pu command
- Ethernet BR-488
- FDDI BR-488
- Frame Relay BR-482
- NCIA BR-488
- QLLC BR-484
- RSRB BR-488
- SDLC BR-486
- Token Ring BR-488
- virtual data link control BR-488
- dspu rsrb command BR-491
- dspu rsrb enable-host command BR-493
- dspu rsrb enable-pu command BR-494
- dspu rsrb start command BR-495
- dspu start command BR-497
- dspu vdlc command BR-499
- dspu vdlc enable-host command BR-501
- dspu vdlc enable-pu command BR-503
- dspu vdlc start command BR-505
- DTE, X.25 timers
- T20 restart request WR-322
- T21 call request WR-323
- T22 reset request WR-324
- T23 clear request WR-325
- dte-invert-txc command DR-196
- DTR dialing
- not affected by dialer map and dialer string commands DR-593, DR-599
- not for rotary group (hunt group) leaders DR-593, DR-599
- outgoing calls only DR-593, DR-599
- remote interface configured to terminate calls DR-593
- remote interface passive DR-599
- remote interface passive only DR-593
- remote interface to terminate calls DR-599
- DTR signal pulsing DR-201
- DVMRP P2R-201
- See IP multicast routing
- DXI 3.2 WR-202
- dxi map command WR-55
- dxi pvc command WR-57
- dynamic command P1R-125
- dynamic map
- SMDS WR-205
- E.164 address
- field descriptions WR-168
- format WR-168
- Frame Relay SVC WR-167
- E.164 addresses
- ATM
- (example) WR-47
- configuring WR-47
- ECA BR-721
- editing command DR-127, FR-5
- editor
- enhanced mode
- disabling for a line DR-127, FR-5
- disabling for session FR-31
- enabling for a line DR-127, FR-5
- enabling for session FR-31
- Release 9.21 keys and functions (table) DR-127
- effective-capacity command
- APPN
- link station BR-593
- port BR-594
- EGP
- neighbor
- relationships P1R-217, P1R-237
- EIA/TIA-232
- handshake DR-36
- enable command FR-8, SR-236
- enable last-resort command SR-71
- enable password command SR-237
- using encryption-type
- (caution) SR-237
- enable secret command SR-239
- using encryption-type
- (caution) SR-239
- enable use-tacacs command SR-72
- using tacacs-server authenticate enable command
- (caution) SR-72
- encapsulation
- DECnet, over Token Ring P3R-123
- display of supported types WR-196
- dynamic detection on serial or ISDN interface DR-208, DR-262
- Frame Relay WR-103
- IPX P2R-301, P2R-346
- LAPB WR-222
- PPP DR-197, DR-494
- SMDS WR-193
- V.120
- dynamically set DR-558
- VINES P3R-64
- X.25 WR-224
- XNS P3R-363
- encapsulation atm-dxi command WR-59
- encapsulation bstun command BR-317
- encapsulation command DR-197, DR-494, DR-538
- encapsulation cpp command DR-227, DR-271
- encapsulation frame-relay command WR-103
- encapsulation isl command BR-57, XR-3
- encapsulation lapb command WR-222
- encapsulation sde command BR-58, XR-4
- encapsulation sdlc command BR-360
- encapsulation sdlc-primary command BR-361
- encapsulation sdlc-secondary command BR-363
- encapsulation smds command WR-193
- encapsulation stun command BR-318
- encapsulation x25 command WR-224
- end command FR-9
- end station identifier
- See ESI
- end system listing
- See ES, listing
- enhanced editing mode
- See editor, enhanced mode
- environmental conditions
- at last shutdown FR-795
- table of measurements within specification FR-798
- temperature and voltage FR-795
- environment variables
- BOOT
- specifying FR-244
- BOOTLDR
- specifying FR-240
- CONFIG_FILE
- specifying FR-135
- equal cost paths
- DECnet P3R-139
- erase bootflash command FR-205
- erase command FR-203
- erase flash command FR-206
- erase start-up config command FR-144
- ERPDU
- interval, determining P3R-198
- ISO CLNS P3R-223
- support, configuring P3R-223
- error messages
- logging priorities
- (table) FR-767
- redirecting FR-775
- ES
- listing P3R-200, P3R-208
- escape character
- returning to EXEC prompt DR-408
- ESCON channel adapter (ECA) BR-721
- ESI
- address (example) WR-16
- addresses, configuring WR-15
- ES-IS, hello rate configuration P3R-194, P3R-205
- /etc/services file P2R-61
- Ethernet
- 0x80d5 format, enabling use of BR-166
- APPN partner node, specifying BR-605
- encapsulated packets
- filtering on input BR-31
- filtering on output BR-39
- ethernet-transit-oui command BR-59, BR-95
- Ethernet type codes
- (table) BR-809
- EtherTalk P2R-1
- evaluate command SR-122
- examples
- document conventions vii
- exception core-file command FR-753
- exception dump command FR-755
- exception memory command FR-757
- exception protocol command FR-759
- exception queue length
- (example) WR-17
- configuring WR-17
- exchange identification frames
- See XID frames
- EXEC
- mode
- default aliases FR-842
- process
- delaying startup of FR-880
- prompt
- setup command facility FR-41
- exec command DR-13
- EXEC process
- disabling on a line DR-13
- enabling on a line DR-13
- setting timeout interval DR-14
- exec-timeout command DR-14, DR-140
- exit
- configuration mode FR-9
- exit command FR-10
- explorers
- spanning-tree
- forwarding or blocking BR-177
- explorers, forwarding or blocking
- all-routes BR-175
- spanning-tree BR-176
- extended access lists
- IP P1R-106
- named dynamic P1R-125
- IPX P2R-206
- extended TACACS
- username authentication DR-531
- facility handling
- X.25 WR-335
- marker facility (table) WR-337
- standard (table) WR-336
- fair-queue command FR-710
- fair queuing
- effect of custom queuing on FR-710
- effect of priority queuing on FR-710
- enabling FR-710
- Frame Relay switching weighting FR-712
- IP precedence weighting FR-712
- traffic stream discrimination
- (table) FR-711
- fast idle timer
- interface, setting DR-601
- map class, setting DR-632
- Fast-Sequenced Transport
- See FST
- fast-switched SR/TLB
- disabling BR-195
- fast switching
- AppleTalk P2R-81
- configuring P2R-81
- displaying cache entries P2R-120
- flow XR-11
- IP
- enabling XR-11
- IPX
- cache entries, deleting P2R-223
- cache entries, displaying P2R-416
- directed broadcast packets P2R-259
- disabling P2R-346
- enabling P2R-346
- inactivity timeout P2R-348
- update timeout P2R-350
- ISO CLNS P3R-216
- optimum XR-11
- SRB BR-185
- SSE BR-188
- transport, configuring BR-214, BR-441
- VINES
- cache entries
- deleting P3R-20
- displaying P3R-27
- configuring P3R-79
- XNS P3R-377
- FDDI
- APPN partner node, specifying BR-605
- raw, IPX encapsulation P2R-301
- FDDITalk P2R-1, P2R-74
- FECN
- bits WR-178
- FID4 frames, configuring the router to read BR-213
- files
- compression FR-145
- filter-for-history command FR-600
- filtering
- by protocol type, Ethernet type codes (table) BR-809
- establishing packet size for SNMP FR-686
- filter register
- AIP
- (example) WR-54
- configuring WR-54
- filters
- AppleTalk
- applying GZL P2R-55
- data packet, applying P2R-21
- GZL P2R-39
- partial zone P2R-73
- routing table P2R-37, P2R-39
- IP, on sources of routing information P1R-469
- IP Enhanced IGRP
- routes in updates P1R-471
- routes in updates, advertising P1R-473
- routing updates, preventing P1R-507
- IPX
- broadcast P2R-278
- generic P2R-246
- NetBIOS P2R-298, P2R-300
- routing table P2R-283, P2R-354
- routing updates P2R-356
- SAP P2R-285, P2R-336, P2R-356
- IPX Enhanced IGRP
- route updates P2R-238, P2R-240
- IPX SAP
- routes in updates
- processing P2R-242
- NLSP
- route updates P2R-238, P2R-240
- VINES
- access lists
- extended P3R-54
- simple P3R-56
- standard P3R-59
- interface, applying to P3R-52
- XNS
- enabling P3R-378
- generic, enabling P3R-362
- routing table, enabling P3R-372
- Finger protocol
- enabling FR-881
- Flash devices
- default FR-180
- Flash load helper
- monitoring FR-167
- Flash memory
- booting automatically FR-244
- erasing internal FR-206
- formatting FR-207
- partitioning FR-211, FR-213
- verifying checksum FR-170, FR-174, FR-185
- floating static routes
- AppleTalk extended networks P2R-88
- AppleTalk nonextended networks P2R-90
- See also AppleTalk, floating static routes; IPX, floating-static routes
- flow control
- configuring for a line DR-15
- input, X.3 PAD parameters DR-815
- start character, configuring for a line DR-59, DR-142
- stop character, configuring for a line DR-62
- flowcontrol command DR-15
- flow switching
- See switching and NetFlow Switching
- format command FR-207
- format indicator 4 (FID4) frames, configuring the router to read BR-213
- forward delay interval, specifying BR-20
- forward explicit congestion notification
- See FECN
- forwarding database, clearing BR-53
- forwarding mask
- X.3 PAD DR-812
- forward max burst size clp0
- (example) WR-18
- forward max burst size clp1
- (example) WR-19
- forward peak cell rate clp0
- (example) WR-20
- forward peak cell rate clp1
- (example) WR-21
- forward sustainable cell rate clp0
- (example) WR-22
- forward sustainable cell rate clp1
- (example) WR-23
- fractional data line DR-218
- framed mode on G.703-E1 interface DR-202
- Frame Rejects (FRMRs)
- SDLC, configuring BR-382
- Frame Relay
- APPN partner node, specifying BR-595
- Bc WR-106
- Be WR-108
- bridging over BR-61, WR-145
- broadcast queue
- actual transmission rate limit WR-111
- maximum transmission rate measures WR-111
- priority WR-111
- broadcast queue, creating WR-111
- broadcast traffic, defined WR-111
- CIR, minimum acceptable, specifying WR-149
- committed burst size (Bc), specifying WR-106
- compression, Stacker packet-by-packet WR-151
- conditions that bring down WR-137
- configured routes, displaying WR-184
- custom queue, associating with map class WR-116
- DE
- group number for DLCI WR-117
- DE bit, purpose WR-118
- DE group
- deleting all groups WR-117
- deleting one group WR-117
- DE list
- deleting entire list WR-119
- deleting part WR-118
- disabling split horizon P1R-215, P1R-231
- discard eligibility
- See DE
- DLCI
- forwarding broadcasts to WR-145, WR-146
- interface statistics WR-189
- mapping protocol address to WR-142
- multicast mechanism WR-146
- multicast mechanism statistics WR-189
- multicasts WR-150
- setting source in test environment WR-141
- enabling WR-103
- encapsulation
- cisco WR-103, WR-121
- IETF WR-103, WR-121, WR-142, WR-145
- excess burst size (Be), specifying WR-108
- FECN/BECN bit passing WR-178
- general statistics, displaying WR-188
- idle timeout, specifying interval WR-120
- IETF encapsulation, effect on TCP/IP header compression WR-126, WR-147
- Inverse ARP WR-102, WR-124
- IP map, inheriting compression characteristics from interface WR-147
- keepalive mechanism
- setting WR-164
- LAPF
- display status of internals WR-172
- FRMR frame, sending WR-128
- link idle timer, setting WR-133
- maximum length of information field, setting WR-131
- maximum retransmission count, setting WR-130
- retransmission timer, setting WR-132
- window size, setting WR-129
- LAPF commands WR-130, WR-131, WR-132, WR-133
- LAPF commands, usually not used WR-129
- LMI
- general statistics, displaying WR-174, WR-189
- keepalive interval WR-164
- type, selecting WR-140
- LMI DCE
- error threshold WR-135
- monitored events count WR-137
- polling verification timer WR-139
- LMI DTE
- error threshold WR-136
- full status polling interval WR-134
- monitored event count WR-138
- LMI NNI
- error threshold WR-135, WR-136
- monitored events count WR-137, WR-138
- polling verification timer WR-139
- map class
- DLCI WR-100
- interface or subinterface WR-114
- routing protocols supported WR-98
- map list
- configuration and display WR-185
- map class and QOS parameters WR-167
- OSPF over WR-142
- point-to-point links WR-145
- PVC
- displaying statistics for WR-178
- status WR-178
- switching on DCE WR-160
- switching on NNI WR-160
- QOS parameters, applying to map list WR-165
- routes, configured, displaying WR-184
- routing protocols supported WR-142
- RTP header compression
- enabling P1R-569
- enabling per DLCI P1R-571
- enabling with TCP header compression P1R-570
- statistics, displaying P1R-635
- SVCs
- displaying all for map list WR-185
- enabling WR-159
- map group for interface required WR-166
- SVC support WR-98, WR-113, WR-149, WR-159
- X.121 or E.164 addresses WR-167
- switching, enabling WR-160
- TCP/IP header compression
- active WR-147
- Cisco encapsulation WR-147
- displaying interface information WR-170
- inconsistent with IETF encapsulation WR-126
- outgoing WR-126
- passive WR-147
- supported interfaces WR-126
- test environment WR-141, WR-150
- traffic shaping FR-745, FR-748, FR-749, WR-106, WR-108
- default queuing WR-163
- operation on SVCs WR-161
- per-VC queuing WR-163
- virtual circuits, assigning priority queue WR-155
- frame-relay adaptive-shaping command WR-104
- frame-relay bc command WR-106
- frame-relay be command WR-108
- frame-relay broadcast-queue command WR-111
- frame-relay cir command WR-113
- frame-relay class command WR-114
- frame-relay custom-queue-list command WR-116
- frame-relay de-group command WR-117
- frame-relay de-list command WR-118
- frame-relay frmr command WR-128
- frame-relay idle-timer command WR-120
- frame-relay interface-dlci command WR-121
- frame-relay intf-type command WR-123
- frame-relay inverse-arp command WR-124
- frame-relay ip rtp header-compression command P1R-569
- frame-relay ip tcp header-compression command WR-126
- frame-relay lapf k command WR-129
- frame-relay lapf n200 command WR-130
- frame-relay lapf n201 command WR-131
- frame-relay lapf t200 command WR-132
- frame-relay lapf-t203 command WR-133
- frame-relay lmi-n391dte command WR-134
- frame-relay lmi-n392dce command WR-135
- frame-relay lmi-n392dte command WR-136
- frame-relay lmi-n393dce command WR-137
- frame-relay lmi-n393dte commands WR-138
- frame-relay lmi-t392dce command WR-139
- frame-relay lmi-type command WR-140
- frame-relay local-dlci command WR-141
- frame-relay map bridge broadcast command BR-61
- frame-relay map bridge command WR-145
- frame-relay map bstun command BR-320
- frame-relay map clns command WR-146
- frame-relay map command WR-142
- frame-relay map ip compress command P1R-570
- frame-relay map ip rtp header-compression command P1R-571
- frame-relay map ip tcp header-compression command WR-147
- frame-relay map llc2 command BR-321, BR-532
- frame-relay map rsrb command BR-533
- frame-relay mincir command WR-149
- frame-relay multicast-dlci command WR-150
- frame-relay payload-compress command WR-151
- frame-relay payload-compress packet-by-packet command WR-151
- frame-relay priority-dlci-group command WR-153
- frame-relay priority-group command WR-155
- frame-relay qos-autosense command WR-156
- frame-relay route command WR-158
- frame-relay svc command WR-159
- frame-relay switching command WR-160
- frame-relay traffic-rate command WR-161
- frame-relay traffic-shaping command WR-163
- frames
- forwarding BR-10, BR-49
- maximum size on source-route bridge BR-216, BR-219, BR-221, BR-225, BR-443, BR-445, BR-447
- using bridge address to filter BR-11
- frame type
- channelized E1, channelizedT1 DR-228
- framing
- IPX
- See IPX, encapsulation
- framing command
- channelized E1, channelized T1 DR-228
- FRAS
- BAN
- configuring BR-536
- displaying status BR-546
- enabling BR-539
- BNN
- displaying status BR-546
- DLCI
- LLC connection BR-542
- enabling BR-540
- LLC connection, associating BR-542
- congestion
- managing BR-545
- connection state
- displaying status BR-546, BR-550
- dial backup over DLSw+
- displaying status BR-546
- enabling BR-534
- DLCI
- SDLC link, associating BR-543
- DLCI backup, configuring BR-538
- host
- LLC2 local termination BR-541
- LLC2
- sessions, displaying status BR-548
- traffic, mapping BR-532
- mapping
- displaying status BR-550
- RSRB
- DLCI number BR-533
- SDLC
- link, associating BR-543
- source-bridge command BR-163
- SRB
- configuring BR-551
- fras backup dlsw command BR-534
- fras ban command BR-536
- fras ddr-backup command BR-538
- fras-host ban command BR-539
- fras-host bnn command BR-540
- fras-host dlsw-local-ack command BR-541
- fras map llc command BR-542
- fras map sdlc command BR-543
- fr-dest-address command BR-595
- free-trade zone
- AppleTalk P2R-54
- establishing P2R-54
- frequency command FR-602
- FRF.9 compression
- example configuration WR-144
- FRMRs
- SDLC, configuring BR-382
- FST
- configuring BR-214
- FST, configuring BR-221, BR-441, BR-443
- full-help command FR-11
- functional address P1R-608
- G.703-E1 interface
- CRC4 DR-192
- framed mode DR-202
- time slot 16 DR-205
- unframed mode DR-202
- G.832 ADM framing
- (example) WR-25
- gateway of last resort, IGRP and RIP, computing P1R-475
- generic-pool command BR-733
- generic route encapsulation
- See GRE
- generic traffic shaping
- description FR-747, FR-749
- Get Nearest Server
- See GNS
- GetZoneList
- See GZL
- global configuration command mode
- entering FR-141
- global translation options
- translate command DR-431
- translate lat command DR-434
- translate tcp command DR-444
- translate x25 command DR-455
- global translation options, translate command DR-440, DR-449
- GNS
- filters P2R-329
- responding to requests P2R-274
- delay in P2R-273
- GRE P2R-201
- group and member asynchronous interfaces DR-17, DR-24
- group codes
- denying access BR-27, BR-34
- permitting access BR-28, BR-35
- group range command DR-17
- guests
- allowing DR-567
- disallowing DR-567
- GZL
- replies P2R-39, P2R-55
- requests P2R-39
- half-bridging
- AppleTalk DR-508
- Combinet devices
- not supporting PPP DR-271
- Combinet devices not supporting PPP DR-227
- IP DR-509
- IPX DR-510
- serial or ISDN, and Ethernet subnetwork DR-508, DR-509, DR-510
- hardware compression WR-142, WR-151
- hardware flow control
- configuring for a line DR-15
- HDLC
- encapsulation
- enabling BR-353
- traffic
- forwarding
- BR-350
- header-compression translate option
- mapping to virtual interface template command DR-435, DR-456
- heartbeat
- DXI 3.2 on SMDS WR-202
- hello BPDUs
- specifying intervals BR-45
- hello packets
- AppleTalk Enhanced IGRP P2R-51
- IP Enhanced IGRP
- interval between P1R-316
- valid time P1R-317
- IPX
- Enhanced IGRP P2R-275
- IS-IS for IP, setting interval P1R-344
- ISO CLNS
- configuration time P3R-194
- hold time P3R-205
- multiplier P3R-239
- Net/One P3R-345, P3R-380
- help
- user-level commands FR-11
- help command FR-13
- helper addresses
- IPX P2R-278
- High-Level Data Link Control
- See HDLC
- High-Speed Serial Interfaces
- See HSSI
- High System Availability
- See HSA
- history command FR-15
- history for RTR
- buckets kept FR-590
- displaying FR-664
- filters FR-600
- lives kept FR-605
- samples kept FR-626
- hold queue
- X.25 packet WR-271
- hold-queue command DR-18
- hold time
- AppleTalk Enhanced IGRP P2R-51
- IP Enhanced IGRP P1R-317
- IPX Enhanced IGRP P2R-281
- hop count
- DECnet P3R-118
- hops-of-statistics-kept command FR-603
- host configuration files
- changing FR-137
- default filename FR-147
- loading from a server FR-137, FR-147
- rcp server
- copying from FR-186
- (example) FR-193
- host-failed message DR-290
- host name
- defining X.25 DR-468
- router FR-854
- VINES, displaying entries P3R-29
- X.25, defining WR-273
- hostname command FR-854
- Hot Standby Router Protocol
- burned-in address P1R-185
- enabling P1R-178
- hello time P1R-174
- hold time P1R-174
- interfaces, tracking P1R-183
- password, configuring P1R-177
- preemption P1R-180
- preemption delay P1R-180
- prioritize by tracking other interfaces P1R-183
- priority P1R-180
- status, displaying P1R-173
- timers, setting P1R-182
- tracking interfaces for priority P1R-183
- hours-of-statistics-kept command FR-604
- hpr command
- APPN control point BR-596
- APPN link station BR-597
- APPN port BR-598
- hpr-max-sessions command BR-599
- hpr retries command BR-600
- hpr sap command BR-601
- hpr timers liveness command BR-602
- hpr timers path-switch command BR-603
- HSA
- automatic synchronization mode, starting FR-265
- configuration synchronization
- automatic FR-265
- manual FR-270
- configuring default slave RSP FR-266
- Flash memory devices, displaying list FR-229
- master and slave, ensuring identical configurations FR-265
- reload slave RSP card FR-269
- slave image
- reloading FR-269
- specifying FR-267
- synchronizing configurations
- automatically FR-265
- manually FR-270
- HSSI
- ATM WR-37
- IBM channel attach BR-717
- idle interval
- changing BR-48
- idle time DR-57, DR-426
- idle time, DDR
- setting for line DR-605
- setting for map-class DR-634
- idle-time command BR-735
- idle timeout
- ATM (example) WR-26
- idle timer
- multilink PPP and dialer-load threshold DR-709
- idle timer, multilink PPP and dialer-load threshold DR-515, DR-605, DR-612
- IDP
- encapsulation format P2R-205
- IEEE 802-encapsulated packets
- assigning an access list to filter on input BR-173
- assigning an access list to filter on output BR-179
- filtering on input BR-29
- filtering on output BR-36
- IEEE spanning-tree protocol
- specifying use BR-51
- See also spanning-tree, protocol
- IETF
- Frame Relay encapsulation WR-103
- I-frames, size limitations for LLC2 BR-428
- IGMP
- See IP multicast routing, IGMP
- ignore-dcd command DR-198
- ignore-lsp-errors command P3R-232
- IGRP
- enabling P1R-241
- offsets, applying P1R-239
- offsets for routing metrics P1R-239
- traffic distribution, controlling P1R-246, P1R-335
- ILMI
- keepalives (example) WR-27
- information (I) frames, size limitations for LLC2 BR-428
- integrated routing and bridging
- bridge-group virtual interface (BVI), creating BR-62
- bridging a protocol in a bridge group, enabling BR-13
- display configuration for each IRB interface BR-75
- enabling BR-46
- interarea router P3R-245
- interarea routing
- DECnet
- hop count P3R-118
- maximum route cost P3R-117
- interface
- virtual template, configuring DR-675, DR-688
- interface alias address
- configuring WR-263
- interface atm command WR-60
- interface bri command DR-152, DR-766
- X.25 traffic on D channel DR-766
- interface bvi command BR-62
- interface channel command BR-736
- interface dialer command DR-625, DR-647
- interface independent traffic shaping
- description FR-747, FR-749
- interface outage
- LAPB timer WR-226
- interfaces
- asynchronous
- DDR dialer maps, configuring DR-615
- backup, configuring DR-657, DR-660
- circuit type, IS-IS for IP, specifying P1R-342
- descriptive name, adding DR-195, DR-224
- dial backup
- Dialer Profiles DR-659
- G.703-E1
- CRC4 DR-192
- enabling framed mode DR-202
- time slot 16 DR-205
- ISDN, configuring for DDR DR-267, DR-270, DR-615
- placing in STUN group BR-342
- serial, dialer maps, configuring for DDR DR-614
- STUN frames
- forwarding BR-349, BR-350, BR-351
- Token Ring BR-544
- interface serial multipoint command WR-194
- interface virtual-template command DR-675, DR-688, DR-690
- interface virtual-tokenring command BR-544
- Interior Gateway Routing Protocol
- See IGRP
- internal buffer
- message logging to FR-766
- internal network number P2R-287
- IPX P2R-214, P2R-285, P2R-336
- internal node number
- IPX P2R-214, P2R-285, P2R-336
- international command FR-17
- Internet Datagram Protocol
- See IDP
- Internet Engineering Task Force
- See IETF
- Internet Packet Exchange Protocol
- See IPX P2R-205
- Interprocess Communications Protocol
- See IPC connections
- interrupt characters, configuring faster response DR-297
- interrupt-switched command BR-604
- intra-area router P3R-245
- intra-area routing
- DECnet, hop count P3R-132
- Inverse Address Resolution Protocol
- See Inverse ARP
- Inverse ARP
- AppleTalk, setting WR-124
- Frame Relay
- clearing maps WR-102
- configuring WR-124
- protocols supported WR-124
- invert txclock command DR-199
- IP
- access lists
- applying on inbound or outbound interfaces P1R-133
- definition of extended P1R-133
- extended, creating P1R-106, P1R-133
- extended, creating dynamic P1R-125
- named P1R-135
- setting on virtual terminal lines P1R-104
- standard P1R-115, P1R-121, P1R-158
- standard named P1R-135
- violations, accounting of P1R-137
- violations, logging P1R-109, P1R-123, P1R-127, P1R-160
- accounting
- access list violations, displaying P1R-165
- database, displaying P1R-165
- addresses
- assigning to TCP port DR-296
- pooling, show settings DR-526
- pools, defining local DR-499
- pools, enabling DR-495
- subnet mask on SMDS WR-208
- fast switching
- enabling XR-11
- local policy routing, identifying the route map P1R-477
- multicast fast switching P1R-598
- named access list P1R-135
- NAT
- See NAT
- NetFlow switching
- enabling XR-14
- policy routing
- enabling P1R-514
- packet length, matching P1R-498
- route map, identifying P1R-479
- redistribution, matching
- a tag P1R-504
- BGP autonomous system path access list P1R-391
- BGP community list P1R-393
- interface P1R-489
- IP address P1R-491
- metric of a route P1R-500
- next hop router address P1R-494
- route source P1R-496
- route type P1R-502
- redistribution, setting
- as-path P1R-426
- BGP origin code P1R-434, P1R-539
- BGP weight P1R-436
- community P1R-428, P1R-432
- default interface P1R-521
- default next hop P1R-525
- interface P1R-523
- level for importing routes P1R-529
- metric P1R-242, P1R-326, P1R-533
- metric type P1R-535
- next hop P1R-527, P1R-537
- preference for autonomous system P1R-531
- tag P1R-430, P1R-519
- tag of destination routing protocol P1R-541
- routing, disabling BR-63
- SMDS
- configuring over WR-207
- multiple subnetworks WR-194
- source IP address, validating P1R-224, P1R-247
- switching
- controlling the route cache XR-11
- See also IPSO
- ip access-group command P1R-133, DR-19, DR-540
- ip access-list command P1R-135
- ip access-list extended (encryption) command SR-194
- ip accounting command P1R-137
- ip accounting-list command P1R-139
- ip accounting-threshold command P1R-140
- ip accounting-transits command P1R-141
- ip address command DR-541
- ip address negotiated command DR-794
- ip address-pool command DR-495
- ip alias command DR-296
- ip as-path access-list command P1R-387
- with regular expressions DR-820, DR-825
- ip authentication key-chain eigrp command P1R-313
- ip authentication mode eigrp command P1R-314
- ip bandwidth-percent eigrp command P1R-315
- ip bootp server command FR-855
- ip cache-invalidate-delay command XR-5
- IPC connections, VINES
- blocks, deleting P3R-21
- information, displaying P3R-33
- port numbers (table) P3R-55, P3R-60
- ip cgmp command P1R-572
- ip community-list command P1R-389
- ip default-network command P1R-475
- ip dhcp-server command DR-497
- ip domain-lookup nsap command P3R-233
- ip drp access-group command P1R-142
- ip drp authentication key-chain command P1R-143
- ip drp server command P1R-144
- ip dvmrp accept-filter command P1R-573
- ip dvmrp auto-summary command P1R-575
- ip dvmrp default-information command P1R-576
- ip dvmrp metric command P1R-577
- ip dvmrp metric-offset command P1R-579
- ip dvmrp output-report-delay command P1R-580
- ip dvmrp reject-non-pruners command P1R-581
- ip dvmrp routehog-notification command P1R-582
- ip dvmrp route-limit command P1R-583
- ip dvmrp summary-address command P1R-584
- ip dvmrp unicast-routing command P1R-585
- IP Enhanced IGRP
- administrative distance, setting P1R-311
- authentication, enabling P1R-313
- bandwidth P1R-315
- default routes P1R-228, P1R-308
- disabling P1R-325
- enabling P1R-325
- filters
- routes in updates P1R-471
- routes in updates, advertising P1R-473
- routing updates, preventing P1R-507
- interfaces, displaying P1R-328
- load balancing P1R-336
- metric offset P1R-324
- metrics, adjusting P1R-229, P1R-309
- neighbor adjacency changes, logging P1R-320
- offsets, applying P1R-220
- redistribution, metrics for P1R-229, P1R-309
- route authentication P1R-313
- route feasibility, determining P1R-336
- route redistribution P1R-228, P1R-229, P1R-308, P1R-309
- route summarization P1R-208, P1R-306, P1R-368
- split horizon, enabling P1R-318
- timers, adjusting P1R-316, P1R-317
- ip flow-export command XR-7, XR-9
- ip ftp passive command FR-761
- ip ftp password command FR-762
- ip ftp source-interface command FR-763
- ip ftp username command FR-764
- ip hello-interval eigrp command P1R-316
- ip hold-time eigrp command P1R-317
- ip http access-class command FR-18
- ip http authentication command FR-19
- ip http port command FR-20
- ip http server command FR-21
- ip identd command SR-242
- ip igmp access-group command P1R-586
- ip igmp helper-address command P1R-587
- ip igmp join-group command P1R-589
- ip igmp query-interval command P1R-590
- ip igmp query-max-response-time command P1R-592
- ip igmp query-timeout command P1R-593
- ip igmp static-group command P1R-594
- ip igmp version command P1R-595
- ip local policy route-map command P1R-477
- ip local-pool command DR-499
- ip mask-reply command P1R-145
- ip mroute-cache command P1R-598
- ip mroute command P1R-596
- ip mtu command P1R-146, DR-20
- ip multicast boundary command P1R-599
- ip multicast cache-headers command P1R-600
- ip multicast helper-map command P1R-602
- ip multicast rate-limit command P1R-604
- IP multicast routing
- access lists P1R-586
- Auto-RP
- cache, clearing P1R-566
- CGMP
- clearing P1R-562
- enabling P1R-572
- proxy P1R-572
- desktop conferencing session P1R-628
- DVMRP
- advertising to neighbors P1R-576
- auto-summarization P1R-575
- delay between reports P1R-580
- reject non-pruning neighbors P1R-581
- route hog notification P1R-582
- route threshold P1R-582
- summary address P1R-584
- unicast routing P1R-585
- enabling P1R-606
- IGMP
- cache P1R-564
- helper address P1R-587
- host-query message interval P1R-590
- query response time P1R-592
- query timeout P1R-593
- statically connected router member P1R-594
- version P1R-595
- IP multicast routing table
- clearing P1R-565
- displaying P1R-645
- leaf router P1R-618
- mrinfo P1R-629
- mroute, configuring P1R-596
- mrouted P1R-629
- multicast groups
- displaying P1R-638
- hosts joining P1R-586
- joining P1R-589
- multicast information
- displaying P1R-640
- multicast tree, tracing P1R-630, P1R-632
- packet headers, storing P1R-600
- PIM
- dense mode, enabling P1R-609
- enabling P1R-609
- filtering P1R-616
- information, displaying P1R-650
- NBMA mode P1R-615
- neighbors, displaying P1R-652
- preventing P1R-616
- shortest path tree, delaying use P1R-623
- sparse-dense mode, enabling P1R-609
- sparse mode
- enabling P1R-609
- PIM sparse mode
- join-and-prune message timer P1R-612
- router-query messages P1R-617
- timers P1R-612
- rendezvous point (RP)
- configuring address P1R-611, P1R-618
- Reverse Path Forwarding (RPF)
- displaying P1R-658
- RP
- assigning to a group P1R-618
- Auto-RP, groups covered P1R-621
- Auto-RP, mapping agent P1R-622
- displaying P1R-654
- filter RP announcements P1R-620
- RPF P1R-645
- displaying P1R-658
- sdr
- displaying cache P1R-661
- listener support P1R-628
- session advertisements P1R-628
- Session Directory Protocol P1R-628
- sparse mode, enabling P1R-609
- static route, configuring P1R-596
- stub multicast routing P1R-587, P1R-616
- Token Ring MAC address mapping P1R-608
- TTL, configuring P1R-607
- whiteboard applications P1R-628
- ip multicast-routing command P1R-606
- ip multicast ttl-threshold command P1R-607
- ip multicast use-functional command P1R-608
- ip nat command DR-776
- ip nat inside destination command DR-778
- ip nat inside source command DR-780, DR-795
- ip nat outside source command DR-782
- ip nat pool command DR-784
- ip nat translation command DR-786
- ip ospf authentication-key command P1R-265
- ip ospf cost command P1R-266
- ip ospf dead-interval command P1R-267
- ip ospf demand-circuit command P1R-268
- ip ospf hello-interval command P1R-269
- ip ospf message-digest-key command P1R-270
- ip ospf name-lookup command P1R-272
- ip ospf network command P1R-273
- ip ospf priority command P1R-275
- ip ospf retransmit-interval command P1R-276
- ip ospf transmit-delay command P1R-277
- ip pim accept-rp command P1R-611
- ip pim command P1R-609
- ip pim message-interval command P1R-612
- ip pim minimum-vc-rate command P1R-613
- ip pim multipoint-signalling command P1R-614
- ip pim nbma-mode command P1R-615
- ip pim neighbor-filter command P1R-616
- ip pim query-interval command P1R-617
- ip pim rp-address command P1R-618
- ip pim rp-announce-filter command P1R-620
- ip pim send-rp-announce command P1R-621
- ip pim send-rp-discovery command P1R-622
- ip pim spt-threshold command P1R-623
- ip pim vc-count command P1R-624
- ip policy route-map command P1R-479
- ip-pool translate option
- mapping to virtual interface template command DR-435, DR-456
- ip precedence command BR-737
- ip radius source-interface command SR-56
- ip rarp-server command FR-274
- ip rcmd domain-lookup command FR-276
- ip rcmd rcp-enable command FR-283
- ip rcmd remote-host command FR-278
- ip rcmd remote-username command FR-281
- ip rcmd rsh-enable command FR-283
- ip reflexive-list timeout command SR-124
- ip rip authentication key-chain command P1R-211
- ip rip authentication mode command P1R-212
- ip rip receive version command P1R-213
- ip rip send version command P1R-214
- ip route-cache command XR-11
- ip route-cache flow command XR-14
- ip route command P1R-481
- ip router isis command P1R-341
- ip routing command BR-63
- ip rsvp bandwidth command P1R-188
- ip rsvp neighbors command P1R-189
- ip rsvp reservation command P1R-190
- ip rsvp sender command P1R-192
- ip rsvp udp-multicast command P1R-194
- ip rtp compression-connections command P1R-625
- ip rtp header-compression command P1R-626
- ip rtp reserve command DR-501
- ip sdr cache-timeout command P1R-627
- ip sdr listen command P1R-628
- ip security add command SR-262
- ip security aeso command SR-263
- ip security allow-reserved command SR-278
- ip security dedicated command SR-264
- ip security eso-info command SR-266
- ip security eso-max command SR-267
- ip security eso-min command SR-269
- ip security extended-allowed command SR-271
- ip security first command SR-272
- ip security ignore-authorities command SR-273
- ip security implicit-labelling command SR-274
- ip security multilevel command SR-276
- IP security option
- See IPSO
- ip security strip command SR-279
- IPSO
- authorities and bit patterns
- (table) SR-265
- definition SR-265
- basic
- configuring SR-262
- extended
- configuring SR-263
- defaults SR-266
- maximum sensitivity levels SR-267
- minimum sensitivity levels SR-269
- labels
- definition SR-265
- levels and bit patterns
- (table) SR-264
- definition SR-264
- ip source-route command P1R-147
- ip split-horizon command P1R-215, P1R-231
- ip split-horizon eigrp command P1R-318
- ip summary-address eigrp command P1R-319
- ip tacacs source-interface command SR-73
- IPTalk
- /etc/services file P2R-61
- IP encapsulation, configuring P2R-59
- UDP port numbers P2R-61
- ip tcp chunk-size command P1R-148, DR-297
- ip tcp compression-connections command P1R-149
- ip tcp header-compression command P1R-150, DR-542
- ip tcp intercept connection-timeout command SR-130
- ip tcp intercept drop-mode command SR-131
- ip tcp intercept finrst-timeout command SR-132
- ip tcp intercept list command SR-133
- ip tcp intercept max-incomplete high command SR-134
- ip tcp intercept max-incomplete low command SR-136
- ip tcp intercept mode command SR-138
- ip tcp intercept one-minute high command SR-139
- ip tcp intercept one-minute low command SR-141
- ip tcp intercept watch-timeout command SR-143
- ip tcp path-mtu-discovery command P1R-151
- ip tcp queuemax command P1R-152
- ip tcp selective-ack command P1R-153
- ip tcp synwait-time command P1R-154
- ip tcp timestamp command P1R-155
- ip tcp window-size command P1R-156
- ip telnet source-interface command FR-856
- ip tftp source-interface command FR-857
- ip tos command BR-738
- ip unnumbered command DR-544
- ip unreachables command P1R-157
- IPX
- access control P2R-216
- access lists
- creating for NLSP route aggregation P2R-210
- extended P2R-206, P2R-229, P2R-395
- named P2R-248
- extended P2R-248
- NLSP route aggregation P2R-248
- SAP P2R-248
- standard P2R-248
- NetBIOS P2R-392
- SAP P2R-213, P2R-234, P2R-400
- standard P2R-216, P2R-236, P2R-402
- summary P2R-232, P2R-398
- accounting
- configuring P2R-250
- database entries, deleting P2R-221
- database threshold P2R-253
- disabling P2R-250
- enabling P2R-250
- filters P2R-252
- maximum transit entries P2R-254
- all-nets flooding P2R-276
- bandwidth-percent eigrp command P2R-258
- broadcasts
- forwarding P2R-276, P2R-278
- type 20 packets P2R-276, P2R-377, P2R-378, P2R-379
- client, connecting to asynchronous interface over PPP DR-546
- clock ticks P2R-269
- compression on PPP links DR-545
- default routes
- See NLSP, default routes
- disabling P2R-271
- encapsulations P2R-301, P2R-346
- ARPA P2R-301
- definitions P2R-301
- Ethernet_802.2 P2R-301
- Ethernet_802.3 P2R-301
- Ethernet_II P2R-301
- Ethernet_Snap P2R-301
- FDDI raw P2R-301
- HDLC P2R-301
- multiple, configuring P2R-301
- Novell-Ether P2R-301
- SAP P2R-301
- SNAP P2R-301
- Enhanced IGRP
- backup server table P2R-257
- disabling P2R-394
- enabling P2R-352, P2R-394
- hello packets P2R-275
- hold-down time P2R-280
- hold time P2R-281
- interface statistics P2R-417
- neighbors, displaying P2R-419
- queries P2R-257
- query packets P2R-367
- redistribution P2R-408
- SAP updates P2R-361
- split horizon P2R-367
- topology table P2R-421
- update packets P2R-367
- Enhanced IGRP filters
- route updates P2R-238, P2R-240
- fast switching
- cache entries, deleting P2R-223
- cache entries, displaying P2R-416
- disabling P2R-346
- enabling P2R-346
- inactivity timeout P2R-348
- update timeout P2R-350
- filters
- broadcast P2R-278
- generic P2R-246
- generic, applying to interface P2R-246
- GNS
- applying to interface P2R-329
- routing table P2R-354
- floating-static routes
- definition P2R-344
- redistributing P2R-409
- framing
- See IPX, encapsulations
- general RIP/SAP query, sending P2R-294
- GNS
- filters P2R-329
- requests P2R-365
- requests, responding to P2R-274
- helper addresses P2R-278
- interfaces, displaying status P2R-425
- internal network numbers P2R-366
- IPXWAN
- disabling P2R-288
- enabling P2R-288
- failed link, handling P2R-291
- IPX network numbers P2R-289
- link delay, controlling P2R-289
- option negotiations P2R-289
- static routing, disabling P2R-292
- static routing, enabling P2R-292
- keepalives P2R-384
- SPX P2R-369
- load sharing P2R-296
- per host P2R-339
- log-neighbor-changes P2R-386
- loopback interfaces DR-431, DR-440, DR-449
- maximum paths, setting P2R-296
- multiple logical networks P2R-302
- named access lists P2R-248
- NetBIOS messages, filtering P2R-298, P2R-300
- NetWare internal network numbers P2R-366
- network connectivity, testing P2R-404, P2R-406
- network numbers
- repairing corrupted P2R-366
- NLSP
- filters, route updates P2R-240
- OS/2 Requestors P2R-366
- over PPP DR-546
- clients connecting to virtual terminal lines DR-431, DR-440, DR-449
- packets, padding P2R-338
- parallel paths, choosing between P2R-296
- ping test characters (table) P2R-404
- ping type
- selecting P2R-340
- protocol numbers (table) P2R-208
- restarting P2R-271
- RIP
- delay field P2R-269
- enabling P2R-352
- updates P2R-330
- updates, timers P2R-381, P2R-383
- RIP, enabling P2R-358
- route-cache, limiting entries P2R-349
- routing
- disabling P2R-301
- enabling P2R-301, P2R-358
- enabling on multiple networks (example) P2R-303
- routing table, updating P2R-381
- routing table entries
- adding P2R-283
- deleting P2R-227
- displaying P2R-442
- SAP
- access lists, creating P2R-213
- broadcast, sending P2R-383
- definition P2R-205
- enabling P2R-358
- filters
- routes in updates
processing P2R-242
- interpacket delay on all interfaces, setting P2R-262
- interpacket delay on a single interface, setting P2R-334
- maximum queue length, setting P2R-365
- messages
- filtering P2R-285, P2R-336, P2R-356
- messages, filtering P2R-285
- table, adding static entries P2R-359
- triggered updates, setting interpacket delay on a single interface P2R-374
- secondary networks P2R-302
- servers
- displaying P2R-446
- internal network number P2R-214, P2R-285, P2R-336
- internal node number P2R-214, P2R-285, P2R-336
- service types (table) P2R-214
- SMDS, configuring over WR-207
- socket numbers (table) P2R-208
- SPF log P2R-440
- spoofing P2R-384
- static routes
- adding to routing table P2R-343
- floating P2R-344
- subinterfaces P2R-302
- configuring (example) P2R-303
- tick count P2R-269
- traffic statistics P2R-451
- type 20 packets
- accepting P2R-377
- forwarding P2R-378, P2R-379
- watchdog packets P2R-384
- ipx access-group command P2R-246
- ipx access-list command P2R-248
- ipx accounting command P2R-250
- ipx accounting-list command P2R-252
- ipx accounting-threshold command P2R-253
- ipx accounting-transits command P2R-254
- ipx advertise-default-route-only command P2R-255
- ipx backup-server-query-interval command P2R-257
- ipx bandwidth-percent eigrp command P2R-258
- ipx broadcast-fastswitching command P2R-259
- ipx default-output-rip-delay command P2R-260
- ipx default-output-sap-delay command P2R-262
- ipx default-route command P2R-264
- ipx default-triggered-rip-delay command P2R-265
- ipx default-triggered-sap-delay command P2R-267
- ipx delay command P2R-269
- ipx down command P2R-271
- ipx gns-reply-disable command P2R-272
- ipx gns-response-delay command P2R-273
- ipx gns-round-robin command P2R-274
- ipx hello-interval eigrp command P2R-275
- ipx helper-address command P2R-276
- ipx helper-list command P2R-278
- ipx hold-down eigrp command P2R-280
- ipx hold-time eigrp command P2R-281
- ipx input-network-filter command P2R-283
- ipx input-sap-filter command P2R-285
- ipx internal-network command P2R-287
- ipx ipxwan command P2R-288
- ipx ipxwan error command P2R-291
- ipx ipxwan static command P2R-292
- ipx link-delay command P2R-293
- ipx linkup-request command P2R-294
- ipx loopback translate option
- mapping to virtual interface template command DR-435, DR-456
- ipx maximum-hops command P2R-295
- ipx maximum-paths command P2R-296
- ipx nasi-server enable command DR-666
- ipx netbios input-access-filter command P2R-298
- ipx netbios output-access-filter command P2R-300
- ipx network command (extended) P2R-301
- ipx nhrp authentication command P2R-305
- ipx nhrp holdtime command P2R-306
- ipx nhrp interest command P2R-307
- ipx nhrp map command P2R-308
- ipx nhrp max-send command P2R-309
- ipx nhrp network-id command P2R-310
- ipx nhrp nhs command P2R-311
- ipx nhrp record command P2R-312
- ipx nhrp responder command P2R-313
- ipx nhrp use command P2R-314
- ipx nlsp csnp-interval command P2R-316
- ipx nlsp enable command P2R-317
- ipx nlsp hello-interval command P2R-319
- ipx nlsp hello-muliplier command P2R-321
- ipx nlsp lsp-interval command P2R-322
- ipx nlsp metric command P2R-323
- ipx nlsp multicast command P2R-324
- ipx nlsp priority command P2R-325
- ipx nlsp retransmit-interval command P2R-326
- ipx nlsp rip command P2R-327
- ipx nlsp sap command P2R-328
- ipx output-gns-filter command P2R-329
- ipx output-rip-delay command P2R-332
- ipx output-sap-delay command P2R-334
- ipx output-sap-filter command P2R-336
- IPX over PPP
- on VTY lines DR-461
- ipx pad-process-switched-packets command P2R-338
- ipx per-host-load-share command P2R-339
- ipx ping-default command P2R-340
- ipx ppp-client command DR-546
- ipx rip-max-packetsize command P2R-341, P2R-363
- ipx rip-multiplier command P2R-342
- ipx route-cache command P2R-346
- ipx route-cache inactivity-timeout command P2R-348
- ipx route-cache max-size command P2R-349
- ipx route-cache update-timeout command P2R-350
- ipx route command P2R-343
- ipx router command P2R-352
- ipx router-filter command P2R-354
- ipx router-sap-filter command P2R-356
- ipx routing command P2R-358
- ipx sap command P2R-359
- ipx sap-incremental command P2R-361
- ipx sap-multiplier command P2R-364
- ipx sap-queue-maximum command P2R-365
- ipx source-network-update command P2R-366
- ipx split-horizon eigrp command P2R-367
- ipx spx-idle-time command P2R-368
- ipx spx-spoof command P2R-369
- ipx throughput command P2R-371
- ipx triggered-rip-delay command P2R-372
- ipx triggered-sap-delay command P2R-374
- ipx type-20-helpered P2R-376
- ipx type-20-input-checks command P2R-377
- ipx type-20-output-checks command P2R-378
- ipx type-20-propagation command P2R-379
- ipx update interval command P2R-381
- ipx update sap-after-rip command P2R-383
- IPXWAN
- See IPX, IPXWAN
- ipx watchdog-spoof command P2R-384
- ISDN
- active calls DR-257
- active calls, displaying DR-180, DR-277
- Advice of Charge
- short-hold timer DR-265
- static idle timer and short-hold timer (example) DR-265
- B1 channel SPID, defining DR-163
- B2 channel SPID, defining DR-164
- Basic Rate Interface (BRI)
- over leased-lines, treated as synchronous serial DR-272
- subinterface, configuring DR-152
- BRI subinterface, configuring DR-766
- called-party number verification DR-154
- caller ID callback DR-731 to DR-735
- call history DR-257
- call history, displaying DR-180, DR-277
- calling number identification DR-157
- call speed, origin and delivery mismatch DR-161, DR-239
- channelized T1
- PRI timeslots DR-250
- channel service states, displaying DR-273
- configuring static TEI DR-769
- dialer maps, configuring for DDR DR-615
- dialer maps, configuring for legacy DDR DR-267, DR-270
- encapsulation, automatic detection DR-208, DR-262
- Layer 2 and Layer 3 timers DR-180, DR-257, DR-277
- leased-line service, 128 kbps DR-272
- memory pool statistics DR-180, DR-257, DR-277
- NFAS
- DDR configuration, needed on primary D channel only DR-275
- group, members and channels, displaying DR-279
- primary and backup D channels, on separate T1 controllers DR-275
- outbound calls, identifying best line DR-621
- outgoing calls
- Sending Complete information element DR-162
- PRI interface
- channel status, displaying DR-277
- Primary Rate Interface (PRI)
- called-party number verification DR-231
- calling number identification DR-234
- channel status DR-257
- services DR-257
- status DR-259
- switch types (table) DR-241
- timeslots DR-250
- semipermanent connections (Germany) DR-613, DR-635
- subinterfaces, BRI DR-152, DR-766
- switch types, service provider (table) DR-165
- timers (table) DR-182
- V.120 detection DR-208, DR-262
- isdn all-incoming-calls-v120 command DR-559
- isdn answer1 command DR-154, DR-231
- isdn answer2 command DR-154, DR-231
- isdn caller command DR-156, DR-233, DR-734
- ISDN caller ID callback DR-731
- isdn calling-number command DR-157, DR-234
- isdn leased-line bri 128 command DR-272
- isdn not-end-to-end command DR-161, DR-239
- isdn sending-complete command DR-162
- isdn service command DR-273
- b_channel 0 DR-273
- isdn spid1 command DR-163
- isdn spid2 command DR-164
- ISDN subaddress
- specifying in dialer string DR-595
- ISDN subaddress, specifying DR-622
- isdn-subaddress for multipoint connections DR-266, DR-269, DR-614
- isdn switch-type command DR-165, DR-241
- isdn tei command DR-167
- isdn x25 dchannel command DR-768
- isdn x25 static-tei command DR-769
- isis adjacency-filter command P3R-234
- isis circuit-type command P1R-342, P3R-236
- isis csnp-interval command P1R-343, P3R-237
- IS-IS for CLNS
- adjacency
- changes, logging P3R-246
- specifying P3R-236
- CSNP interval, configuring P3R-237
- designated router election P3R-242
- domain password, assigning P3R-231
- enabling P3R-219
- hello
- interval P3R-238
- packet, setting multiplier P3R-239
- Level 1 routing table, displaying P3R-296
- link-state
- database, displaying P3R-293
- metric P3R-240
- packet, setting MTU P3R-247
- PDU
- discarding P3R-232
- retransmission interval P3R-243
- NETs P3R-256
- passwords
- assigning to area P3R-180
- configuring P3R-241
- routing, enabling P3R-265
- routing information, redistributing P3R-262
- shortest path first log, displaying P3R-297
- IS-IS for IP
- adjacency, specifying P1R-342, P1R-343
- area passwords, configuring P1R-338
- conditional default origination P1R-339
- default route, generating P1R-262, P1R-339
- designated router election, specifying P1R-350
- domain passwords, configuring P1R-340
- enabling P1R-355
- interface password, assigning P1R-349
- link state metrics, configuring P1R-348
- password authentication, configuring P1R-338
- retransmission level, setting P1R-351
- router support, specifying level P1R-353
- isis hello-interval command P1R-344, P3R-238
- isis hello-multiplier command P1R-346, P3R-239
- isis lsp-interval command P1R-347
- isis metric command P1R-348, P3R-240
- isis password command P1R-349, P3R-241
- isis priority command P1R-350, P3R-242
- isis retransmit-interval command P1R-351, P3R-243
- isis retransmit-throttle-interval command P1R-352
- ISO CLNS
- addresses, DNS queries P3R-233
- adjacency, logging changes P3R-246
- checksums P3R-192
- CLNS neighbors, removing P3R-184
- congestion information, transmitting over Frame Relay WR-146
- congestion threshold P3R-195
- DECnet cluster alias configuration P3R-193
- destination routing table, displaying P3R-341
- DNS queries P3R-233
- ES neighbors
- displaying P3R-276, P3R-284
- removing P3R-182
- fast switching P3R-216
- filter expressions, displaying filter sets P3R-278, P3R-279
- general information, displaying P3R-273
- hello messages, specifying P3R-194, P3R-205
- hello packet, setting multiplier P3R-239
- interfaces
- displaying information P3R-280
- enabling P3R-197
- IS-IS routing, enabling P3R-219
- IS neighbors
- displaying P3R-282, P3R-284
- removing P3R-183
- link-state
- packets, setting MTU P3R-247
- PDUs
- discarding P3R-232
- retransmission P3R-243
- MTU, maximum P3R-209
- neighbors, listing P3R-200, P3R-208
- OSI model P3R-179
- packet lifetime P3R-212
- ping command P3R-257, P3R-260
- redistribution P3R-262
- address match P3R-248
- interface match P3R-251
- level set P3R-267
- metric match P3R-252
- metric set P3R-269
- metric-type set P3R-271
- next-hop match P3R-249
- route-source match P3R-250
- route-type match P3R-253
- tag set P3R-272
- routing, enabling P3R-221
- routing cache
- clearing P3R-181
- displaying entries P3R-275
- reinitializing P3R-181
- routing table, clearing entries from P3R-185
- security-option packets, allowing to pass P3R-222
- shortest path first log, displaying P3R-297
- SMDS, configuring over WR-206
- Target Identifier Address Resolution Protocol
- See TARP
- traffic statistics, displaying P3R-291
- ISO IGRP
- border routers P3R-262
- filters
- aliases P3R-227
- ES adjacencies, applying to P3R-191
- expressions, combining P3R-201
- frames, applying to P3R-189
- IS adjacencies, applying to P3R-191
- IS-IS adjacencies, applying to P3R-234
- ISO IGRP adjacencies, applying to P3R-244
- templates P3R-203
- metric adjustments P3R-254
- preferred routes P3R-264
- router level, specifying P3R-220
- routing information redistribution P3R-262
- routing processes, displaying P3R-286
- split horizon, enabling P3R-225
- timing parameter adjustments P3R-336
- iso-igrp adjacency-filter command P3R-244
- ISR
- enabling BR-604
- is-type command P1R-353, P3R-245
- keepalive command BR-740
- Frame Relay WR-164
- keepalive interval, LMI
- defining WR-164
- setting, example WR-164
- keepalive packets
- generating FR-787, FR-788
- keepalives P2R-368
- IPX P2R-384
- SPX P2R-369
- keepalive timer
- ATM (example) WR-92
- keepalive timer, setting rate, LAT DR-315
- keepalive translate option, mapping to virtual interface template command DR-435, DR-456
- kerberos clients mandatory command SR-94
- kerberos credentials forward command SR-95
- kerberos instance map command SR-96
- kerberos local-realm command SR-97
- kerberos preauth command SR-98
- kerberos realm command SR-99
- kerberos server command SR-100
- kerberos srvtab entry command SR-101
- kerberos srvtab remote command SR-103
- key chain command P1R-485
- key command P1R-483
- key config-key command SR-104
- unrecoverable DES key
- (caution) SR-104
- keymap command DR-298
- keymaps
- custom, creating DR-300
- default DR-301
- special characters DR-300
- syntax DR-300
- keymap-type command DR-305
- key-string command P1R-487
- Kinetics IPTalk P2R-59
- lan command BR-742
- lan-dest-address command BR-605
- LANE
- ATM addresses
- automatic assignment XR-31
- configuration server XR-31
- fixed assignment XR-43
- manual assignment XR-38
- templates
- ESI XR-34
- prefix XR-34
- broadcast-and-unknown server
- manually specifying ATM address XR-33
- providing different address to client XR-33
- client
- activating on subinterface XR-35
- adding address to database XR-27
- ATM address, providing manually XR-36
- exiting and rejoining emulated LAN XR-22
- one per subinterface XR-35
- configuration server, ATM address
- assigning XR-31
- identifying to server and client XR-38
- specifying XR-38
- default LAN name in configuration server database XR-29
- emulated LAN
- client exiting and rejoining XR-22
- forcing client to join new XR-25
- one per subinterface XR-35
- LE ARP table, clearing entries XR-22, XR-23
- LECS
- specifying a list of LECS addresses to use XR-45
- lane auto-config-atm-address command XR-31
- lane bus-atm-address command XR-33
- lane client-atm-address command XR-36
- lane client command XR-35
- lane config-atm-address command XR-38
- lane config command XR-40
- lane database command XR-42
- lane fixed-config-atm-address command XR-43
- lane global-lecs-address command XR-45
- lane le-arp command XR-46
- lane server-atm-address command XR-48
- lane server-bus command XR-50
- lan-name command BR-507
- LAN Network Manager
- See LNM
- LAPB
- compression DR-190
- encapsulation WR-222
- frame retransmssion parameter (N2 frame) WR-231
- hardware outage WR-226
- idle timer (T4 parameter) WR-234
- interface outage timer WR-226
- interface statistics, displaying WR-241
- modulo, description WR-228
- outstanding frames
- acknowledgment (modulo parameter) WR-228
- maximum number (window parameter) WR-227
- N1 bits WR-229
- retransmission timer (T1 parameter) WR-233
- unsignaled link failure WR-234
- window size (k parameter) WR-227
- lapb interface-outage command WR-226
- lapb k command WR-227
- lapb modulo command WR-228
- lapb n1 command WR-229
- lapb n2 command WR-231
- lapb protocol command
- See encapsulation lapb command
- lapb t1 command WR-233
- lapb t4 command WR-234
- LAT
- access control
- assigning names to group lists DR-311
- defining a group list DR-317
- on connections DR-288
- specifying access conditions to nodes DR-308
- associating a command with a service P3R-156, DR-322
- associating a rotary group with a service DR-330
- compression, specifying BR-32
- deleting entry from connection queue DR-291
- description DR-306
- enabling DR-310
- group code filtering
- configuring BR-47
- displaying BR-77
- group code mask, specifying DR-324
- inbound connections, enabling DR-323
- keepalive timer, setting DR-315
- learned services DR-352
- listing
- available services DR-306, DR-352
- making a connection DR-306 to DR-307
- maximum number of sessions, setting DR-332
- node name, changing DR-316
- opening multiple connections DR-306
- password for a service, setting DR-327
- protocol translation options DR-439, DR-448
- proxy node, configuring DR-329
- receive buffers
- setting for host DR-313
- setting for server DR-320
- retransmission limit, setting DR-319
- service advertisement timer DR-331
- service announcements
- configuring DR-321
- reenabling DR-321
- service groups
- permitting access based on BR-28
- specifying for filtering BR-27
- service identification, setting DR-326
- static service rating, setting DR-328
- transmission interval, setting DR-333
- viewing
- active sessions DR-353
- learned LAT services DR-352
- lat access-list command DR-308
- lat command DR-306
- lat enabled command DR-310
- lat group-list command DR-311
- lat host-buffers command DR-313
- lat host-delay command P3R-155, DR-314
- lat ka-timer command DR-315
- lat node command DR-316
- lat out-group command DR-317
- lat remote-modification command DR-318
- lat retransmit-limit command DR-319
- lat server-buffers command DR-320
- lat service-announcements command DR-321, DR-324, DR-331
- lat service autocommand DR-322
- lat service autocommand command P3R-156
- lat service enabled command DR-323
- lat service-group command DR-332
- lat service ident command DR-326
- lat service password command DR-327
- lat service rating command DR-328
- lat service-responder command DR-331
- lat service rotary command DR-330
- lat service timer command DR-331
- lat vc-sessions command DR-332
- lat vc-timer command DR-333
- Layer 2 Forwarding
- tunnel information, displaying DR-749
- leaf router P1R-618
- LE ARP table
- dynamic entries, clearing XR-23
- Level 1 routers P3R-245
- Level 2 routers P3R-245
- limited-resource command
- APPN
- link station BR-606
- port BR-607
- limiting LU sessions BR-723
- line
- characteristics, modifying remotely DR-318
- console port, configuring DR-22
- folding, X.3 DR-814
- number
- absolute DR-22
- virtual terminal DR-22
- linecode command DR-242
- line-code type, selecting DR-242
- line coding format DR-200
- line command DR-21
- line configuration mode, entering DR-21
- line feed
- insertion, X.3 PAD parameters DR-815
- padding, X.3 PAD parameters DR-815
- line number
- auxiliary DR-22
- relative DR-21
- virtual terminal DR-22
- lines
- disconnecting DR-295
- displaying information about DR-57, DR-426
- line types DR-22
- Link Access Procedure, Balanced
- See LAPB
- link command BR-743
- Link Quality Monitoring (LQM)
- enabling DR-521
- link-queuing command BR-608
- link state metrics
- IS-IS for IP, configuring P1R-348
- link-state metrics
- configuring IS-IS P3R-240
- link-state packet
- See NLSP, LSP
- link-state PDU
- discarding P3R-232
- MTU, setting P3R-247
- retransmission interval P3R-243
- link traps
- disabling FR-696
- lives-of-history-kept command FR-605
- LLC2
- CMNS support BR-359
- connection information, displaying BR-409
- local acknowledgment, enabling for SNA traffic prioritization BR-213
- polling frequency, configuring BR-368
- wait interval for an acknowledgment, configuring BR-364
- XID transmissions, specifying frequency of BR-376
- llc2 ack-delay-time command BR-364
- llc2 ack-max command BR-366
- llc2 dynwind command BR-545
- llc2 idle-time command BR-368
- llc2 local-window command BR-369
- llc2 n2 command BR-370
- llc2 t1-time command BR-371
- llc2 tbusy-time command BR-372
- llc2 tpf-time command BR-373
- llc2 trej-time command BR-375
- llc2 xid-neg-val-time command BR-376
- llc2 xid-retry-time command BR-377
- LMI
- ANSI T1.617 Annex D WR-140
- CCITT Q.933 Annex A WR-140
- Cisco Group 4 WR-140
- Frame Relay type, selecting WR-140
- general statistics, displaying WR-174, WR-189
- keepalive interval WR-164
- type, displaying WR-140
- LMI DCE
- error threshold WR-135
- monitored events count WR-137
- polling verification timer WR-139
- LMI DTE
- error threshold WR-136
- full status polling interval WR-134
- monitored event count WR-138
- LMI NNI
- error threshold WR-135, WR-136
- monitored events count WR-137, WR-138
- polling verification timer WR-139
- LNM
- configuration report server BR-100
- displaying information
- for one or more interfaces BR-149
- for one or more stations BR-153
- for one or more Token Rings BR-152
- ring error monitor BR-106
- ring parameter server BR-107
- lnm alternate command BR-98
- lnm crs command BR-100, BR-101, BR-105
- lnm loss-threshold command BR-102
- lnm password command BR-103
- lnm rem command BR-106
- lnm rps command BR-107
- lnm snmp-only command BR-108
- lnm softerr command BR-109
- load balancing, IP Enhanced IGRP P1R-336
- load-interval command FR-714
- load sharing
- Apollo Domain P3R-5
- IPX P2R-296
- XNS P3R-373
- load statistics
- interval FR-714
- locaddr-priority command BR-200
- locaddr-priority-list command BR-202, BR-322
- local acknowledgment
- current state of, displaying BR-439
- for LLC2 BR-225
- source-bridge remote-peer tcp command, using with BR-225, BR-447
- for SDLLC connections, enabling BR-451
- Local Area Transport
- See LAT
- Local Management Interface
- See LMI
- See also Frame Relay, LMI
- local preference value, BGP, setting P1R-531
- local-sap command BR-609
- LocalTalk P2R-1
- locate-queuing command BR-610
- location command BR-508
- location string
- setting FR-685
- lock-and-key
- idle timeouts SR-114
- temporary entries
- clearing manually SR-114, SR-117
- creating manually SR-115
- enabling SR-114
- lock-and-key access
- absolute timeout P1R-106, P1R-125
- creating dynamic access list P1R-106, P1R-125
- lock command DR-334
- log-adjacency-changes command P2R-385, P3R-246
- logging buffer
- clearing FR-752
- logging buffered command FR-766
- logging command FR-765
- logging console command FR-767
- logging facility command FR-769
- facility-type keywords (table) FR-769
- logging history command FR-771
- logging history size command FR-771, FR-773
- logging in
- as specific user DR-335
- to change login username DR-335
- logging messages
- See message logging
- logging monitor command FR-774
- logging on command FR-775
- logging source-interface command FR-777
- logging synchronous command FR-778
- logging trap command FR-780
- Logical Link Control, type 2
- See LLC2
- logical unit
- See LU address
- login authentication command DR-131, SR-22
- using list-names
- (caution) SR-22
- login command DR-335
- login command (line subcommand) DR-129, DR-337
- login-string command DR-339
- login tacacs command SR-24
- log-neighbor-changes command P1R-320, P2R-386
- loopback
- ATM packets (example) WR-62
- channelized T1 or E1 channel-group DR-245
- DS-3, channelized T1 link DR-247
- from MIP over dedicated T1 link DR-246
- T1 line DR-244
- loopback command WR-62
- loopback command (E1 controller) DR-243
- loopback interfaces
- assigning IPX network to DR-546
- assigning virtual terminal lines to DR-461
- loopback local command (interface) DR-245
- loopback local command (T1 controller) DR-244
- loopback remote command (controller) DR-246
- loopback remote command (interface) DR-247
- loop detection buffer
- clearing table P3R-187
- displaying table P3R-306
- setting timer P3R-318
- LQM DR-521
- lsap command BR-745
- LSP
- See NLSP, LSP
- lsp-gen-interval command P2R-387
- lsp-mtu command P2R-388, P3R-247
- lsp-refresh-interval command P2R-389
- LU address
- logical units, mapping to queuing priorities based on BR-202
- priority list, specifying BR-205
- queuing priorities BR-322
- LU sessions, limiting BR-723
- M-23 ADM framing
- (example) WR-24
- MAC address
- mapping to IP address FR-274
- mac-address command BR-110
- MacIP
- addresses, allocating P2R-65, P2R-69
- clients, displaying P2R-139
- server, establishing P2R-67
- servers, displaying P2R-140
- traffic statistics P2R-143
- manual booting
- Flash FR-236
- ROM FR-236
- map
- list (example) WR-66
- statement (example) WR-33, WR-51
- map class
- ATM (example) WR-64
- dialer map DR-248
- map-class atm command WR-63
- map-class command DR-648
- map-class dialer command DR-248, DR-648, DR-720
- map-class frame-relay command WR-165
- map group
- ATM (example) WR-65
- map-group command WR-65
- Frame Relay WR-166
- map-list command WR-66
- Frame Relay WR-167
- source and destination addresses
- E.164 or X.121 WR-167
- mapping
- MAC address-to-IP address FR-274
- name-to-NSAP address P3R-206
- NSAP-to-SNPA address P3R-200, P3R-208
- NSAP-to-TID
- mapping P3R-326
- TID-to-NSAP address P3R-312, P3R-320
- master and slave
- See HSA
- master bundle interface host DR-683
- match address command SR-196
- match as-path command P1R-391
- match clns address command P3R-248
- match clns next-hop command P3R-249
- match clns route-source command P3R-250
- match community-list command P1R-393
- match interface command P1R-489, P3R-251
- match ip address command P1R-491
- match ip next-hop command P1R-494
- match ip route-source command P1R-496
- match length command P1R-498
- match metric command P1R-500, P3R-252
- match route-type command P1R-502, P3R-253
- match tag command P1R-504
- max burst size
- backward (example) WR-6, WR-7
- forward (example) WR-18, WR-19
- max-cached-entries command BR-611
- max-cached-trees command BR-612
- maximum-lus command BR-748
- maximum-memory command BR-613
- maximum paths
- Apollo Domain P3R-5
- IPX P2R-296
- XNS P3R-373
- maximum-paths command P1R-506
- maximum transmission unit
- See MTU
- max-link-stations command BR-614
- max-llc2-sessions command BR-747
- max-lsp-lifetime command P2R-390
- max-rcv-btu-size command BR-616
- M-bit
- X.25 more data bit WR-277, WR-294
- MCI interface card
- pulsing DTR signal DR-201
- MD5 authentication
- IP Enhanced IGRP P1R-314
- on TCP connections between BGP peers P1R-406
- OSPF P1R-250
- RIP P1R-485
- members command DR-24
- memory-size iomem command FR-210
- menu command
- EXEC FR-22
- global FR-23
- resume FR-26
- menu command command FR-25
- menus
- display options FR-23
- invoking FR-22
- menu item text FR-27
- titles FR-28
- underlying commands FR-25
- menu text command FR-27
- menu title command FR-28
- Message Digest 5 (MD5) authentication
- See MD5 authentication
- message identifier
- See MID
- message logging
- console FR-767
- enabling FR-775
- history table size FR-773
- monitor FR-774
- SNMP trap FR-771
- UNIX syslog server FR-765
- message queue length
- SNMP FR-688
- messages
- failed connection DR-290
- login DR-290, DR-339
- redirecting system error FR-775
- successful connection DR-290, DR-339
- See also message logging
- metric adjustments, ISO IGRP P3R-254
- metric holddown command P1R-233
- metric maximum-hops command P1R-234
- metrics
- assigning for redistribution P1R-210, P1R-264, P1R-384
- IP Enhanced IGRP, adjusting P1R-229, P1R-309
- routing
- Net/One P3R-345, P3R-380
- VINES P3R-69, P3R-77
- XNS P3R-345, P3R-380
- metric weights command P1R-235, P1R-321, P3R-254
- MIB
- Cisco Round-Trip Time Monitor FR-617
- RMON FR-610, FR-614
- microcode
- loading FR-164
- reloading FR-166
- microcode command FR-164
- microcode reload command FR-166
- MID
- per virtual circuits (example) WR-29
- minimum-memory command BR-617
- mobile remote node DR-406
- mode
- framed DR-202
- unframed DR-202
- modem
- chat script DR-588, DR-799
- dialer hold queue DR-604
- EC/compression DR-799
- scripts (examples) DR-802
- settings
- AUX (table) DR-800
- EC/compression (table) DR-799
- platform-specific (table) DR-800
- troubleshooting DR-802
- modem, specifying capabilities of DR-84
- modem answer-timeout command DR-70, DR-140
- modem at-mode command DR-71
- modem at-mode-permit command DR-73
- modem attributes DR-51
- modem autoconfigure command DR-74
- modem autoconfigure discovery command DR-74
- modem autoconfigure type command DR-75
- modem autotest command DR-76
- modem bad command DR-79
- modem buffer-size command DR-81
- modem busyout command DR-82
- modem callin command DR-25
- modem callout command DR-26, DR-36
- modemcap edit command DR-83
- modemcap entries, using templates to join DR-52
- modemcap entry command DR-84
- modem chat scripts
- DDR DR-588
- default DR-588
- modem cts-required command DR-36
- See modem printer command
- modem dialin line command DR-28
- modem dtr-active command DR-29
- modem hold-reset command DR-86
- modem inout command DR-31
- modem poll retry command DR-88
- modem poll time command DR-89
- modem printer command DR-32
- modem reconnection, forcing a waiting period DR-725
- modem recovery-time command DR-90
- modem ri-is-cd command
- See modem dialin command
- See modem dialin line command
- modem shutdown command DR-91
- modem startup-test command DR-92
- modem status-poll command DR-93
- monitor
- message logging to FR-774
- MOP
- controlling sysid messages DR-346
- enabling for an interface DR-346
- server
- booting automatically FR-244
- forwarding boot requests FR-285
- mop device-code command FR-284
- mop enabled command DR-346
- mop retransmit-timer command FR-285
- mop retries command FR-286
- mop sysid command DR-346
- more data bit
- X.25 WR-277, WR-294
- mrinfo command P1R-629
- mrouted P1R-629
- mrouted, description P1R-576
- mstat command P1R-630
- mtrace command P1R-632
- MTU
- Cisco defaults and limits for packet WR-193
- ISO CLNS, maximum P3R-209
- setting IS-IS link-state PDU P3R-247
- mtu translate option, mapping to virtual interface template command DR-435, DR-456
- multicast addresses
- ATM (example) WR-30
- multicast command P2R-391
- multicast group, joining P1R-589
- multicast source addresses
- configuring bridging support for BR-49
- multilink bundle interface, defining template to use DR-502
- Multilink PPP
- bundle information, displaying DR-528, DR-714
- multilink virtual-template command DR-502
- multiple-character patterns
- anchoring DR-823
- creating DR-822
- description DR-820
- using multipliers DR-822
- multiple logical IP subnetworks
- on SMDS WR-194, WR-209, WR-211
- multipliers DR-822
- using in regular expressions DR-822
- multipoint intervals
- ATM (example) WR-31
- multiprotocol virtual circuit
- X.25 WR-282
- multiring all command BR-112
- multiring command BR-111
- Name Binding Protocol
- See AppleTalk, NBP
- name caching
- enabling for NetBIOS BR-117
- name command BR-750
- named IP access list P1R-135
- named IPX access lists P2R-248
- name display facility
- AppleTalk P2R-72
- configuring P2R-63
- name local-seg-id command XR-51
- name mapping
- CLNS
- NETs P3R-206
- NSAPs P3R-206
- name server-atm-address command XR-52
- NASI
- clients, enabling DR-666
- connection status, displaying DR-667
- TTY lines, connecting through DR-666
- VTY lines, connecting through DR-666
- nasi authentication command SR-25
- using list-names
- (caution) SR-25
- NAT
- clearing translations DR-774
- enabling DR-776
- inside destination address translation DR-778
- inside source address translation DR-780
- outside source address translation DR-782
- pool of addresses, defining DR-784
- statistics, displaying DR-788
- translations, displaying DR-790
- Native Client Interface Architecture
- See NCIA
- NBF, viewing sessions DR-55
- NBMA network
- mapping IPX-to-NBMA addresses P2R-308
- network identifier P2R-310
- NBP
- access lists
- creating P2R-8
- other NBPs P2R-15
- AppleTalk P2R-63, P2R-72
- named entities P2R-8
- name registration table P2R-147
- packet type P2R-8
- services, displaying P2R-145
- tests P2R-197
- NCIA
- circuits
- clearing BR-700
- status information, displaying BR-709
- client
- active connection, terminating BR-701
- configuring BR-704
- status information, displaying BR-711
- registered client control block, releasing BR-702
- server
- configuring BR-707
- RSRB ring, configuring BR-706
- starting and stopping BR-703
- status information, displaying BR-714
- ncia client command BR-704
- ncia command BR-703
- ncia rsrb command BR-706
- ncia server command BR-707
- negative-caching command BR-618
- neighbor command
- advertisement-interval P1R-395
- distribute-list P1R-398
- EGBP-multihop P1R-400
- EGP, IGRP, RIP P1R-217, P1R-237
- filter-list P1R-401
- maximum-prefix P1R-403
- next-hop-self P1R-405
- OSPF P1R-278
- remote-as P1R-411
- route-map P1R-413
- update-source P1R-418
- version P1R-419
- weight P1R-420
- neighbor default-originate command P1R-396
- neighbor description command P1R-397
- neighbor password command P1R-406
- neighbor peer-group command
- assigning members P1R-408
- creating P1R-409
- neighbor route-reflector-client command P1R-414
- neighbor send-community command P1R-416
- neighbor soft-reconfiguration inbound command P1R-417
- neighbor table, VINES
- deleting P3R-22
- displaying P3R-35
- static paths, creating P3R-72
- Net/One
- emulation mode P3R-368, P3R-380
- hello packets P3R-345, P3R-380
- metrics, routing P3R-345, P3R-380
- routing
- enabling P3R-368, P3R-380
- updates P3R-380
- NetBEUI
- connection information, displaying DR-55
- remote node, configuring DR-34
- NetBIOS
- IPX, filtering messages P2R-298, P2R-300
- session table
- global DR-55
- interface DR-55
- NetBIOS, IBM
- access list filter
- assigning to interface BR-118, BR-119
- defining for outgoing messages BR-127, BR-128
- byte offset access lists BR-186
- byte offsets, configuring BR-113
- cache, displaying entries in BR-155
- clearing dynamically learned names BR-91
- name caching
- configuring the "dead time" for BR-124, BR-125
- defining a static entry BR-120
- enabling BR-117, BR-126
- netbios access-list bytes command BR-113
- netbios access-list command P2R-392
- netbios access-list host command BR-115
- netbios enable-name-cache command BR-117
- netbios input-access-filter bytes command BR-118
- netbios input-access-filter host command BR-119
- netbios name-cache command BR-120
- netbios name-cache name-len command BR-122
- netbios name-cache proxy-datagram command BR-123
- netbios name-cache query-timeout command BR-124
- netbios name-cache recognized-timeout command BR-125
- netbios name-cache timeout command BR-126
- netbios nbf command DR-34
- netbios output-access-filter bytes command BR-127
- netbios output-access-filter host command BR-128
- net command P1R-354, P3R-256
- NetFlow Switching
- description XR-15
- exporting cache entries XR-9
- flow switching XR-9
- IP
- enabling XR-14
- NETs for CLNS
- algorithm for choosing P3R-210
- configuring P3R-256
- name mapping P3R-206
- static address, assigning P3R-210
- NetWare Asynchronous Services Interface
- See NASI
- NetWare Link Services Protocol
- See NLSP
- Network DR-773
- Network Address Translation
- See NAT
- network area command P1R-280
- network command P2R-394
- backdoor P1R-423
- BGP P1R-422
- IGRP P1R-238, P1R-323
- RIP P1R-218
- network configuration files
- default filename FR-147
- changing FR-139
- description FR-140
- loading from a server FR-147
- rcp server
- copying from FR-186
- network entity titles
- See NETs for CLNS
- Network File System
- See NFS
- network service access point
- See NSAP
- network services
- tailoring use of FR-787, FR-788
- Network-to-Network Interface
- See NNI
- network weight command P1R-424
- Next Hop Resolution Protocol
- See NHRP
- NFS
- port number FR-720
- NHRP
- IPX
- access lists P2R-307
- authentication P2R-305
- authoritative response P2R-306
- cache, displaying P2R-430
- cache clearing P2R-224
- static entries P2R-308
- controlling requests P2R-307
- dynamic cache entries P2R-224
- enabling P2R-310
- holdtime P2R-306
- initiation
- controlling P2R-314
- loop detection P2R-312, P2R-313
- network identifier P2R-310
- packet rate P2R-309
- record and reverse record options P2R-312
- requests, triggering P2R-314
- Responder Address option P2R-313
- security P2R-305
- server addresses P2R-311
- static IPX-to-NBMA address mapping P2R-308
- traffic statistics P2R-432
- triggering requests P2R-307
- NLSP
- area network numbers, setting P2R-219
- CSNP interval, specifying P2R-316
- database, displaying P2R-434
- default routes
- advertising P2R-255
- specifying P2R-264
- designated router
- specifying election priority P2R-325
- disabling on an interface P2R-317
- enabling P2R-352
- on an interface P2R-317
- filters
- route updates P2R-238
- GNS queries, replying to P2R-272
- hello interval, specifying P2R-319, P2R-321
- holddown period between partial route calculations, controlling P2R-407
- hop count, maximum from RIP updates P2R-295
- internal network number
- definition P2R-287
- setting P2R-287
- IPX
- SPF log P2R-440
- link delay, specifying P2R-293
- logging adjacency changes P2R-385
- LSP
- generation interval P2R-387
- MTU, maximum size P2R-388
- refresh interval P2R-389
- retransmission interval, specifying P2R-326
- setting maximum lifetime P2R-390
- transmission interval P2R-322
- metric, specifying P2R-323
- multicast addressing
- interface configuration P2R-324
- router configuration P2R-391
- neighbors, displaying P2R-437
- redistribution P2R-408
- RIP entries, aging out P2R-342
- RIP packets
- maximum size P2R-341
- processing P2R-327
- SAP entries
- aging P2R-364
- SAP packets
- maximum size P2R-363
- processing P2R-328
- shortest path first algorithm (SPF) calculation interval, controlling P2R-456
- subinterfaces P2R-302
- configuring (example) P2R-303
- throughput, specifying P2R-371
- NNI
- and DCE
- error threshold WR-135
- monitored events count WR-137
- polling verification timer WR-139
- and DTE
- error threshold WR-136
- monitored events count WR-138
- Frame Relay PVC switching
- interface type WR-123
- node name, changing LAT DR-316
- node-row command BR-620
- nonbroadcast multiaccess network
- See NBMA network
- non-return to zero inverted (NRZI)
- enabling DR-200
- nonvolatile RAM
- See NVRAM
- notes
- usage in text vii
- notify command DR-340
- Novell IPX
- See IPX
- nrzi-encoding command DR-200
- NSAP
- address (example) WR-35
- NSAP address
- ATM WR-34
- NSAPs for CLNS
- cluster alias P3R-193
- media address mapping P3R-200, P3R-208
- name mapping P3R-206
- SNPA mapping P3R-200, P3R-208
- static address assignment P3R-210
- TID mapping P3R-326
- NSSA P1R-254
- ntp access-group command FR-858
- ntp authenticate command FR-860
- ntp authentication-key command FR-861
- ntp broadcast client command FR-864
- ntp broadcast command FR-863
- ntp broadcastdelay command FR-865
- ntp clock-period command FR-866
- ntp disable command FR-867
- ntp master command FR-868
- ntp peer command FR-870
- ntp server command FR-872
- ntp source command FR-874
- ntp trusted-key command FR-875
- ntp update-calendar command FR-876
- null-xid-poll command BR-622
- NVRAM
- file compression FR-145
- o command FR-254
- ODR
- enabling P1R-204
- offload command BR-751
- offset-list (IGRP) command P1R-239
- offset-list (IP Enhanced IGRP) command P1R-324
- offset-list (RIP) command P1R-219
- offsets
- IP Enhanced IGRP P1R-324
- RIP P1R-219
- offsets, applying P1R-220
- offsets, IGRP P1R-239
- On-Demand Routing
- See ODR
- online documentation
- See CCO
- open connections, displaying DR-407, DR-482
- Open Shortest Path First (OSPF) protocol
- See OSPF
- optimum switching
- See switching
- Organizational Unique Identifier
- See OUI code
- OSI
- See ISO CLNS
- OSPF
- address range for a single route, specifying P1R-255
- aggregate addresses, creating P1R-301
- area ID P1R-280
- authentication for an area, enabling P1R-250
- auto cost P1R-282
- broadcasts
- over Frame Relay WR-142
- over X.25 BR-83, BR-453, WR-285
- consolidate routes at a boundary P1R-255
- cost P1R-266
- cost to the default external route, assigning P1R-252
- database, displaying information P1R-288
- dead interval P1R-267
- default metrics P1R-282
- default metric values, setting P1R-264
- default route, generate P1R-262
- default summary route cost P1R-252
- demand circuit P1R-268
- designated router P1R-275
- DNS names P1R-272
- enabling P1R-284
- hello interval P1R-269
- hello packet interval P1R-267
- interface information, displaying P1R-296
- interfaces P1R-280
- link state advertisement retransmissions P1R-276
- MD5 authentication P1R-270
- neighbor information, displaying P1R-298
- neighbor state changes, viewing P1R-283
- network type P1R-273
- not so stubby area P1R-254
- NSSA P1R-254
- over X.25 network WR-283
- password P1R-265
- priority of router P1R-275
- retransmit interval P1R-276
- route calculation timers, configuring P1R-303
- routers interconnecting to nonbroadcast networks P1R-278
- routing processes, displaying information P1R-285
- routing table entries, displaying P1R-287
- stub area, defining P1R-257
- summarize routes at a boundary P1R-255
- timers P1R-303
- transmit delay P1R-277
- virtual link P1R-259
- virtual links, displaying P1R-300
- ospf auto-cost command P1R-282
- ospf log-adj-changes command P1R-283
- OUI code
- choosing type to use over translational bridges BR-59
- OUI code, choosing type to use over translational bridges BR-95
- output-delay command P1R-220
- outstanding frames, LAPB
- acknowledgment (modulo parameter) WR-228
- maximum number (window parameter) WR-227
- owner command FR-606
- owning-cp command BR-623
- packet
- compressed packet-by-packet BR-83, BR-453, WR-284
- compressed TCP header WR-289
- maximum size, establishing FR-686
- SNMP, filtering FR-686
- X.25
- acknowledgment, configuring WR-326
- input, setting size of WR-277
- output, setting size of WR-294
- packet assembler/disassembler
- See PAD
- packet-by-packet compression
- X.25 BR-83, BR-453
- packet-by-packet compression, X.25 WR-284
- packet lifetime
- ISO CLNS P3R-212
- PAD
- connections between devices DR-478, WR-235, WR-295
- Macintosh connecting through DR-429, DR-438, DR-447
- mapping WR-291
- parameters, changing DR-474 to DR-476, DR-483
- profile scripts, creating WR-331
- See also X.3 PAD
- pad command DR-472
- PAD profile scripts DR-470
- PAP
- authentication method DR-506
- Parallel Channel Adapter
- See PCA
- parallel paths
- Apollo Domain P3R-5
- IPX, choosing between P2R-296
- XNS P3R-373
- parameter-setting command DR-812
- parentheses
- using in regular expressions DR-824
- partition command FR-211
- partition flash command FR-211, FR-213
- passive-interface command P1R-507
- Password Authentication Protocol
- See PAP
- password command DR-133, SR-243
- passwords
- assigning for a line DR-133
- clear-text version DR-570
- IS-IS
- area, configuring P3R-180
- domain, assigning P3R-231
- interface, setting P3R-241
- IS-IS for IP
- area, assigning on P1R-338
- authentication P1R-338
- domain, assigning on P1R-340
- interface, assigning on P1R-349
- LNM, setting for BR-103
- Path MTU Discovery
- enabling P1R-151
- RFC 1191 P1R-151
- paths
- selection, DECnet P3R-133
- source-route bridging, modifying default cost for BR-191
- transparent bridging, modifying default cost for BR-40
- paths-of-statistics-kept command FR-607
- pattern matching
- See regular expressions
- pattern matching symbols, LAT (table) DR-308
- PCA BR-721
- PDUs, error
- See ERPDU
- PDUs, redirect
- See RDPDU
- peak cell rate
- backward (example) WR-8, WR-9
- forward (example) WR-20, WR-21
- peer default IP address command DR-503
- peer default ip address command DR-548
- peer neighbor-route command DR-505
- peer neighbor routes
- dialer interface, effect on DR-505
- performance management
- description FR-705
- period (.) character
- ping command output FR-782
- permanent rate queues
- ATM
- (example) WR-41
- configuring WR-41
- permanent virtual circuit
- See PVC
- permit (extended) command P2R-395
- permit (reflexive) command SR-126
- permit (SAP filtering) command P2R-400
- permit (standard) command P2R-402
- permit (summary) command P2R-398
- permit command P1R-158, SR-197
- IPX
- extended P2R-395
- SAP filtering P2R-400
- standard P2R-402
- summary P2R-398
- Phase IV/Phase V, DECnet, designing network P3R-121
- physical-layer command DR-35
- PIM
- See IP multicast routing, PIM
- ping command P1R-634, FR-140
- AppleTalk
- privileged P2R-108
- unprivileged P2R-110
- verbose mode P2R-109
- DECnet
- privileged P3R-157
- user P3R-159
- IPX
- privileged P2R-404
- test characters (table) P2R-404
- unprivileged P2R-406
- ISO CLNS
- privileged P3R-257
- user P3R-260
- LAPB T1 value, determining WR-233
- privileged level, general description FR-781
- test characters (table) FR-781, FR-784
- test connectivity FR-781, FR-784
- user level, description FR-784
- VINES P3R-25
- XNS
- privileged P3R-351
- test characters (table) P3R-351, P3R-353
- unprivileged P3R-353
- ping decnet command P3R-159
- plus character in regular expressions DR-822
- point-to-multipoint signaling
- ATM (example) WR-32
- Point-to-Point Protocol
- See PPP
- policy routing
- based on address P1R-492
- based on packet length P1R-498
- enabling P1R-514
- local P1R-477
- route map, identifying P1R-477
- route map, identifying P1R-479
- to a default next hop P1R-525
- to a next hop P1R-527
- to an interface P1R-523
- to default interface P1R-521
- poll bit, sending for LLC2 BR-373
- poll timer
- ATM (example) WR-94
- Poor Man's Routing
- DECnet P3R-127
- port command
- APPN
- connection network BR-624
- link station BR-625
- port numbers, Telnet DR-37
- PPP DR-550 to DR-551
- APPN remote SAP, specifying BR-626
- authentication
- CHAP or PAP, order requested DR-506
- incoming calls only DR-506
- remote CHAP, common secret DR-513
- remote PAP, username sent DR-519
- BACP DR-693 to DR-715
- callback configuration DR-695
- dialer load threshold DR-702
- dropping links, no response DR-697
- links, removing from multilink bundle DR-697
- retransmissions, setting limits DR-700
- telephone number, local, configuring DR-703
- telephone number negotiation DR-703
- transmit queue threshold DR-702
- type of link, adding or dropping DR-699
- callback
- enabling on non-DTR dialer interface DR-721
- secure DR-718
- CHAP
- common hostname DR-512
- common secret DR-513
- client, calling back DR-726
- common secret, remote CHAP authentication DR-513
- encapsulation
- changing dynamically DR-208, DR-262
- enabling on interface DR-494
- IPX packet compression over DR-545
- Multilink PPP
- enabling for BACP DR-708
- PAP
- remote, username and password sent DR-519
- remote authentication (example) DR-519
- session, automatic startup DR-536
- wide-area networking DR-491 to DR-532
- ppp authentication command DR-506, SR-27
- CHAP DR-506
- PAP DR-506
- using list-names
- (caution) SR-27
- ppp bap callback command DR-695
- ppp bap call command DR-694
- ppp bap drop command DR-697
- ppp bap link types command DR-699
- ppp bap max command DR-700
- ppp bap monitor load command DR-702
- ppp bap number command DR-703
- ppp bap timeout command DR-706
- ppp bridge appletalk command DR-508
- ppp bridge ip command DR-509
- ppp bridge ipx command DR-510
- ppp callback command DR-248, DR-720, DR-721, DR-726
- ppp chap hostname command DR-512, SR-29
- ppp chap password command DR-513, SR-30
- ppp chap refuse command SR-31
- ppp chap wait command SR-32
- ppp command DR-550
- ppp-dest-address command BR-626
- ppp multilink command DR-515
- BACP, enabling DR-708
- ppp multilink fragment-delay command DR-517
- ppp multilink interleave command DR-518
- ppp pap sent-username command DR-519, SR-33
- ppp quality command DR-521
- ppp use-tacacs command SR-35
- single-line option
- (caution) SR-35
- ppp use-tacacs translate option
- mapping to virtual interface template command DR-435, DR-456
- prc-interval command P2R-407
- predictor compression DR-492
- predictor compressor DR-190
- preferred-nnserver command BR-753
- preferred routes
- specifying with ISO IGRP P3R-264
- pri-group command DR-250
- pri-group timeslots nfas_d command DR-275
- primary SDLC station, configuring routing device as BR-361
- priority group, assigning BR-324
- priority-group command BR-204, BR-324, FR-716
- priority-list command BR-200, BR-205
- priority-list default command FR-717
- priority-list interface command FR-718
- priority-list protocol bstun command BR-326
- priority-list protocol command FR-719
- priority-list protocol ip tcp command BR-327
- priority-list queue-limit command FR-722
- priority-list stun address command BR-329
- priority queuing
- by interface type FR-719
- definition FR-719
- privileged EXEC command mode
- entering FR-8
- privilege level (line) command SR-246
- probes
- See RTR
- prompt
- customizing FR-877
- prompt command FR-877
- propagation-delay command
- APPN link station BR-627
- APPN port BR-628
- protocol addresses
- mapping (example) WR-55
- protocol groups, creating BR-346
- Protocol-Independent Multicast
- See IP multicast routing, PIM
- protocol numbers
- IPX (table) P2R-208
- protocols
- selecting terminal transport DR-388
- protocol translation
- global options DR-431, DR-440, DR-449, DR-455
- LAT DR-434
- TCP DR-444
- X.25 DR-455
- global translation options DR-431, DR-440, DR-449
- LAT options DR-439, DR-448
- outgoing options, mapping to virtual interface template commands DR-435, DR-456
- SLIP and PPP options DR-430, DR-439, DR-448
- Telnet DR-429, DR-437, DR-443, DR-448
- Telnet/TCP DR-429, DR-437, DR-443, DR-448
- Telnet/TCP options DR-437, DR-443
- X.25 options DR-429, DR-439
- proxy, configuring for LAT DR-329
- proxy explorers
- configuring BR-181
- enabling for NetBIOS name caching BR-117
- proxy network numbers
- assigning P2R-77
- pseudobroadcasting
- ATM WR-51
- SMDS static map WR-213
- pu command
- direct BR-755
- DLUR BR-754
- pulse-time command DR-201
- pu-type-20 command BR-630
- PVC
- ATM (examples) WR-40
- resetting XOT WR-220
- X.25
- address maps, displaying WR-248
- encapsulation, establishing WR-296
- HIC WR-269
- HOC WR-270
- HTC WR-274
- LIC WR-278
- LOC WR-280
- LTC WR-281
- serial interfaces on (example) WR-300
- states WR-259
- switched WR-299
- switched options (table) WR-302
- tunneled WR-304
- pwd command FR-214
- QLLC
- APPN
- configuring BR-695
- partner node, specifying BR-694
- configured for DLSw BR-452, BR-455
- data link
- defining, SNA host BR-517
- enabling, SNA BR-512
- qllc accept-all-calls command BR-414
- qllc dlsw command BR-276
- qllc npsi-poll command BR-417
- qllc partner command BR-418
- qllc sap command BR-420
- qllc srb command BR-422
- qllc xid command BR-424
- Qualified Logical Link Control
- See QLLC
- queued host-initiated connections
- deleting entries from, LAT DR-291
- queue-list default command FR-724
- queue-list interface command FR-725
- queue-list protocol bstun command BR-331
- queue-list protocol command FR-726
- queue-list protocol ip tcp command BR-332
- queue-list queue byte-count command FR-728
- queue-list queue limit command FR-729
- queues
- custom FR-726
- fair FR-710
- holding packets for modem connection DR-604
- length, SNMP trap queues FR-688
- priority FR-717, FR-719
- queuing priorities
- BSTUN
- based on header BR-326
- based on TCP port BR-327
- configuring BR-202, BR-205
- STUN
- based on address BR-329
- based on a TCP port BR-327
- radius-server configure-nas command SR-57
- radius-server dead-time command SR-58
- radius-server host command SR-59
- radius-server host non-standard command SR-61
- radius-server key command SR-62
- radius-server retransmit command SR-64
- radius-server timeout command SR-65
- RAND compression algorithm DR-190, DR-492
- random-detect command FR-730
- RARP
- router, configuring as server FR-274
- raw queue size
- ATM
- (example) WR-43
- configuring WR-43
- rcp
- configuring FR-278, FR-282
- copying files FR-277
- DNS, enabling security FR-276
- remote username FR-247
- RDPDU
- configuring for sending, ISO CLNS P3R-224
- interval to disable P3R-213
- Real-time Transport Protocol
- Multilink PPP interleaving DR-501
- receive buffers
- setting for host, LAT DR-313
- setting for server, LAT DR-320
- receiver not ready (RNR) frames BR-372
- receiver ready (RR) frames BR-368, BR-372
- Recognized Operating Agencies lists
- See ROA lists
- Recognized Operating Agency
- See X.25, ROA
- redirect messages, VINES P3R-76
- redirect protocol data unit
- See RDPDU
- redistribute command P1R-509, P2R-408, P3R-262
- redistribute static clns command P3R-262
- redistribute static ip command P1R-509
- redistribution
- AppleTalk
- Enhanced IGRP P2R-82
- assigning metrics for P1R-210, P1R-264, P1R-384
- IP
- IP address P1R-514
- one routing domain into another P1R-509
- See also IP redistribution
- IP Enhanced IGRP
- metrics for P1R-229, P1R-309
- of default routes P1R-228, P1R-308
- IPX Enhanced IGRP P2R-408
- IS-IS P3R-262
- ISO IGRP P3R-262
- match criteria
- address P3R-248
- interface P3R-251
- metric P3R-252
- next-hop P3R-249
- route source P3R-250
- route-type P3R-253
- See also IP, redistribution
- NLSP P2R-408
- one protocol to another P1R-513
- routes, using same metric value P1R-210, P1R-264, P1R-384
- routing information P1R-428, P1R-432, P3R-250
- set criteria
- level P3R-267
- metric P3R-269
- metric-type P3R-271
- tag P3R-272
- using route maps P1R-428, P1R-432
- See also IP redistribution
- references and recommended reading FR-907
- Reflexive Access Lists
- configuring
- (examples) SR-123, SR-128
- temporary entries
- characteristics SR-127
- timeouts, global
- (examples) SR-124
- regular expressions
- alternative DR-823
- characters with special meaning (table) DR-821
- creating DR-820
- using multipliers DR-822
- using parentheses for recall DR-824
- with anchoring DR-823
- description DR-819
- examples DR-825
- recalling DR-824
- special characters
- anchoring (table) DR-823
- multipliers (table) DR-822
- reject timer BR-375
- relative line number DR-21
- reload command FR-256
- reloading
- operating system FR-256
- remote copy protocol
- See rcp
- Remote Monitoring
- See RMON
- remote peer
- specifying forced RSRB protocol version number BR-443
- specifying frame size BR-221, BR-225, BR-443, BR-447
- remote procedure call (RPC)
- port number FR-720
- remote shell
- See rsh server
- remote source-route bridging
- See RSRB
- remote username
- rcp requests
- default values FR-247
- overriding default value FR-247
- reporting link number, specifying threshold BR-98
- request-data-size command FR-608
- reserved-inbound command BR-631
- reserved-outbound command BR-632
- Resource Reservation Protocol
- See RSVP
- response-data-size command FR-609
- response time reporter
- See RTR
- resume command DR-341, DR-474, DR-814, FR-26
- retransmission interval, setting for IP IS-IS P1R-351
- retransmission limit
- LAT DR-319
- retry count, LLC2 BR-370
- retry-limit command
- APPN link station BR-633
- APPN port BR-634
- Reverse Address Resolution Protocol
- See RARP
- reverse connections DR-26, DR-30
- Reverse Path Forwarding (RPF) P1R-645
- displaying P1R-658
- RFC 1034
- domain name servers FR-272
- RFC 1035
- domain names FR-854
- RFC 1045
- Ethernet type code for Versatile Message Translation Protocol BR-811
- RFC 1084
- BootP extensions DR-4
- BOOTP requests for asynchronous interfaces FR-272
- RFC 1144
- TCP/IP header compression DR-554, WR-289
- TCP header compression P1R-150
- RFC 1178
- choosing a name for your computer FR-854
- RFC 1191
- Path MTU Discovery P1R-151
- RFC 1247
- authentication P1R-250
- poll interval P1R-278
- RFC 1293 WR-124
- RFC 1323
- TCP timestamp P1R-155
- RFC 1334
- PPP PAP authentication DR-491
- RFC 1340
- "well known" port number XR-20
- RFC 1356 BR-83
- X.25 and ISDN multiprotocol interconnect BR-453, WR-282
- X.25 encapsulation WR-224
- X.25 PVC encapsulation WR-297
- RFC 1447
- predefined SNMP views FR-694
- RFC 1490 WR-103
- RFC 1516
- IETF Repeater Hub MIB FR-680
- RFC 1570
- PPP callback DR-717
- RFC 1577
- classical IP over ATM WR-4
- RFC 1661
- PPP DR-491
- RFC 1717
- MLP DR-491
- RFC 1757
- RMON alarm group FR-612
- RMON MIB FR-610, FR-614
- RFC 1994
- PPP CHAP DR-491
- RFC 2018
- TCP selective acknowledgment P1R-153
- RFC 2125
- BACP DR-693
- RFC 742
- Finger protocol FR-881
- RFC 865
- Quote of the Day servers FR-272
- RFC 868
- time servers FR-272
- RFC 877 BR-83
- IP datagram transmission BR-453, WR-284
- RFC 887
- RLP servers FR-272
- RFC 903
- RARP FR-275
- RFC 950
- subnet masks FR-272
- RFCs
- Cisco-supported (table) FR-911
- RIF
- cache contents, displaying BR-156
- for routed protocols BR-111
- information, enabling collection of BR-111
- ring groups, establishing BR-129
- static information, entering BR-129
- rif command BR-129
- rif timeout command BR-131
- rif validate-age command BR-132
- rif validate-enable-age command BR-135
- rif validate-enable command BR-133
- rif validate-enable-route-cache command BR-136
- ring group BR-449
- RIP
- IP
- administrative distance P1R-312, P1R-469
- automatic summarization P1R-208, P1R-306
- default metric values, setting P1R-210, P1R-384
- default network P1R-475
- delay between packets in update P1R-220
- enabling P1R-221
- metric offset P1R-219
- offsets, applying P1R-219
- redistribution P1R-471, P1R-473
- version, global P1R-225
- version, interface basis, receiving P1R-213
- version, interface basis, sending P1R-214
- IP authentication
- accept lifetime P1R-466, P1R-483, P1R-485, P1R-487
- clear text P1R-212
- displaying key information P1R-558
- enabling P1R-211
- key P1R-483
- key chain P1R-485
- key string P1R-487
- MD5 P1R-212
- send lifetime P1R-517
- IPX
- delay field P2R-269
- enabling P2R-358
- updates P2R-330
- XNS
- enabling P3R-379
- updates, advertising P3R-375
- updates, receiving P3R-368
- update timers P3R-382
- rlogin
- connections to server DR-343, DR-344
- description DR-343
- login string DR-339
- rlogin command DR-343
- rlogin trusted-remoteuser-source local command DR-344
- RMON
- agent status, displaying FR-635
- alarms, enabling FR-612
- enabling FR-616
- event table FR-614
- interface, enabling FR-610
- rmon alarm command FR-612
- rmon command FR-610
- rmon event command FR-614
- rmon queuesize command FR-616
- RNR frames BR-372
- ROA
- See X.25, ROA
- ROA lists BR-84, BR-454
- role command
- APPN link station BR-635
- APPN port BR-636
- ROM
- booting automatically FR-244
- root bridge, configuring BR-50
- rotary command DR-36
- rotary groups
- and DDR dialer hold queues DR-604
- services and port numbers (table) DR-37
- rotary line configuration DR-36
- route aggregation access lists
- See access lists
- route-aggregation command P2R-411
- route map
- BGP, applying to incoming and outgoing routes P1R-413
- route-map command P1R-513, P3R-264
- router
- host name FR-854
- router-additional-resistance command BR-637
- router bgp command P1R-425
- route redistribution
- See redistribution
- route reflector P1R-370, P1R-371, P1R-414
- router eigrp command P1R-325
- router igrp command P1R-241
- router isis command P1R-355, P3R-265
- router iso-igrp command P3R-266
- router odr command P1R-204
- router ospf command P1R-284
- router rip command P1R-221
- routes
- poisoned P2R-157, P2R-158
- static
- Apollo Domain P3R-7
- IPX P2R-343
- VINES P3R-77
- XNS P3R-376
- route summarization
- automatic P1R-208, P1R-306, P1R-368
- IS-IS addresses P1R-301, P1R-363
- OSPF addresses P1R-255
- routing
- and bridging, concurrent BR-17
- and bridging, integrated BR-46
- routing cache
- ISO CLNS
- clearing P3R-181
- displaying entries P3R-275
- reinitializing P3R-181
- routing information
- ISO CLNS P3R-262
- routing information field
- See RIF
- Routing Information Protocol
- See RIP
- routing table
- Apollo Domain
- entries, adding P3R-7
- updating P3R-9
- AppleTalk
- entries, displaying P2R-155
- timers, changing P2R-93
- update timers, setting P2R-93
- DECnet P3R-133
- default network in IP P1R-475
- IPX P2R-227, P2R-283
- VINES
- deleting P3R-23
- displaying P3R-39
- static routes, creating P3R-77
- XNS P3R-372
- Routing Table Maintenance Protocol
- See RTMP
- Routing Table Protocol
- See VINES, RTP
- routing translate option
- mapping to virtual interface template command DR-435, DR-456
- RPF P1R-645, P1R-658
- RR frames BR-368, BR-372
- rsh command FR-287
- rsh server
- (example) FR-288
- access, granting FR-278
- commands, executing FR-283, FR-287
- DNS, enabling security FR-276
- RSRB
- combining transport methods BR-445
- FRAS
- DLCI number BR-533
- size of the backup queue, modifying BR-227
- transport methods, combining BR-220
- rsrb remote-peer lsap-output-list command BR-207
- rsrb remote-peer netbios-output-list command BR-208
- rsrb-virtual-station command BR-638
- RSVP
- enabling for IP P1R-188
- fair queuing FR-712
- filters information, displaying P1R-196
- interface information, displaying P1R-195
- neighbor reservation, allowing P1R-189
- neighbors, displaying P1R-197
- PATH message reception, simulating P1R-192
- receiver information, displaying P1R-199
- request information, displaying P1R-198
- RESV message reception, simulating P1R-190
- sender information, displaying P1R-200
- UDP-encapsulated multicasts, generating P1R-194
- RTMP
- routes
- advertising P2R-79
- routing table update timers, changing P2R-93
- routing updates
- disabling transmission P2R-87
- stub mode, enabling P2R-85
- touring updates
- strict checking P2R-92
- RTP
- See VINES, RTP
- RTP header compression
- and TCP header compression, enabling P1R-570
- connections supported P1R-625
- enabling P1R-626
- Frame Relay, enabling for maps P1R-569
- Frame Relay encapsulation, using P1R-571
- Frame Relay statistics, displaying P1R-635
- statistics
- clearing P1R-567
- displaying P1R-659
- Frame Relay P1R-635
- RTR
- application information, displaying FR-657
- configuration information, displaying FR-660
- history
- collection FR-590
- displaying FR-664
- filters FR-600
- lives kept FR-605
- samples kept FR-626
- operational state, displaying FR-666
- probe
- configuring FR-617
- frequency FR-602
- owner FR-606
- scheduling FR-624
- type FR-701
- reaction trigger
- configuring FR-620, FR-622
- displaying FR-668
- request data size FR-608
- resetting FR-623
- response data size FR-609
- statistics
- displaying FR-658, FR-662, FR-697
- hops kept FR-603
- hours kept FR-604
- kept FR-598
- paths kept FR-607
- tags FR-698
- threshold FR-699
- timeout FR-700
- verify data FR-703
- rtr command FR-617
- rtr reaction-configuration command FR-619
- rtr reaction-trigger command FR-622
- rtr reset command FR-623
- rtr schedule command FR-624
- running configuration file
- backing up on the server FR-186
- copying to the server (example) FR-193
- rxboot ROM
- streamlined setup facility FR-41
- rxspeed command DR-134
- safe-store-cycle command BR-639
- safe-store-host command BR-640
- safe-store-interval command BR-641
- samples-of-history-kept command FR-626
- SAP
- access list, named P2R-248
- broadcast, sending P2R-383
- definition P2R-205
- delay between packets
- setting on all interfaces P2R-262
- setting on a single interface P2R-334
- filters
- creating P2R-285, P2R-336
- filters, creating P2R-213
- maximum queue length, setting P2R-365
- table, adding static entries P2R-359
- triggered updates, setting delay between packets on a single interface P2R-374
- update interval, setting P2R-381
- updates P2R-361
- sap-priority command BR-209
- sap-priority-list command BR-210
- scheduler allocate command FR-732
- scheduler-interval command FR-733
- scrambling
- DS-3 (example) WR-14
- script activation DR-38
- script arap-callback command DR-727
- script callback command DR-729
- script connection DR-40
- script dialer command DR-588
- script reset command DR-42
- script startup command DR-44
- SDLC
- APPN
- configuring BR-643
- partner node, specifying BR-642
- broadcast, enabling BR-333
- configuring routing device
- as a primary SDLC station BR-361
- as a secondary SDLC station BR-363
- interface information, displaying BR-406
- local acknowledgment for STUN, enabling BR-346, BR-351
- maximum incoming frame size, setting BR-386
- multidrop configuration BR-396
- secondary descriptions (table) BR-435
- secondary stations, assigning to serial link BR-378
- T1 timer BR-401
- sdlc address command BR-378
- sdlc address FF ack-mode command BR-379
- sdlc-dest-address command BR-642
- sdlc dlsw command BR-278, BR-380
- sdlc dte-timeout command BR-381
- sdlc frmr-disable command BR-382
- sdlc holdq command BR-383
- sdlc k command BR-384
- sdlc n1 command BR-386
- sdlc n2 command BR-387
- sdlc partner command BR-388
- sdlc poll-limit-value command BR-389
- sdlc poll-wait-timeout command BR-393
- sdlc qllc-prtnr command BR-395
- sdlc role command BR-396
- sdlc-sec-addr command BR-643
- sdlc simultaneous command BR-399
- sdlc slow-poll command BR-400
- sdlc t1 command BR-401
- sdlc test serial command BR-402
- sdlc virtual multidrop command BR-333
- sdlc vmac command BR-404
- sdlc xid command BR-405
- SDLLC
- device-initiated connections, enabling BR-426
- enabling use of BR-431
- local acknowledgment, enabling BR-451
- on serial interfaces, configuring BR-431
- sdllc partner command BR-426
- sdllc ring-largest-frame command BR-428
- sdllc sap command BR-429
- sdllc sdlc-largest-frame command BR-430
- sdllc traddr command BR-431
- sdllc xid command BR-433
- secondary networks, IPX P2R-302
- secondary SDLC stations
- assigning to serial link BR-378
- configuring routing device as a BR-363
- security
- See also access lists
- See also access lists, IP; IPSO; lock-and-key access; RIP, IP authentication
- See also authentication
- See also IPSO
- See also lock-and-key
- See also lock-and-key access
- security command
- APPN
- link station BR-644
- port BR-645
- security jumper
- show flash all command FR-222
- selective acknowledgment
- TCP P1R-153
- send-lifetime command P1R-517
- serial interfaces
- DTR signal pulsing DR-201
- LAT compression BR-32
- low-speed, Cisco 2520 through 2523 routers DR-35
- Serial Line Internet Protocol
- See SLIP
- server connections
- LAT DR-306 to DR-307
- PPP DR-550 to DR-551
- rlogin DR-343, DR-344 to DR-380
- SLIP DR-554 to DR-555
- Telnet DR-378 to DR-381
- TN3270 DR-389
- XRemote DR-408, DR-412, DR-416
- service advertisement timer DR-331
- Service Advertising Protocol
- See SAP
- service announcements, reenabling LAT DR-321
- service-any command BR-646
- service compress-config command FR-145
- service config command FR-140, FR-147
- service decimal-tty command FR-879
- service exec-callback command DR-730
- service exec-wait command FR-880
- service finger command FR-881
- service hide-telnet-address command FR-882
- service nagle command FR-734
- service old-slip-prompts command DR-552
- service pad command DR-478, WR-235
- service pad from-xot command WR-237
- service pad to-xot command WR-238
- service password-encryption command SR-248
- security level
- (caution) SR-248
- service prompt config command FR-883
- service pt-vty-logging command DR-418
- services
- tailoring your network FR-787, FR-788
- service slave-log command FR-786
- Service-Specific Connection-Oriented Protocol
- See SSCOP
- service tcp-keepalives-in command FR-787
- service tcp-keepalives-out command FR-788
- service tcp-small-servers command FR-884
- service telnet-zero-idle command FR-885
- service timestamps command FR-789
- service types
- AppleTalk (table) P2R-63
- IPX (table) P2R-214
- service udp-small-servers command FR-886
- serving-nn command BR-647
- Session Directory Protocol
- See IP multicast routing, sdr
- session-limit command DR-135
- sessions, limiting number per line DR-135
- session-timeout command DR-136
- set algorithm 40-bit-des command SR-202
- set algorithm des command SR-204
- set as-path command P1R-426
- set automatic-tag command P1R-519
- set community command P1R-428
- set dampening command P1R-430
- set default interface command P1R-521
- setenv command DR-409, DR-411
- set interface command P1R-523
- set ip default next-hop command P1R-525
- set ip next-hop command P1R-527
- set level command P1R-529, P3R-267
- set local-preference command P1R-531
- set metric command P3R-269
- set metric command (IP Enhanced IGRP) P1R-242, P1R-326
- set metric command (protocol-independent) P1R-533
- set metric-type command P1R-535, P3R-271
- set metric-type internal command P1R-432
- set next-hop command P1R-537
- set origin command P1R-434, P1R-539
- set-overload-bit command P1R-357
- set peer command SR-206
- set tag command P1R-541, P3R-272
- setup command
- See setup command facility
- setup command facility FR-40
- asynchronous interfaces
- configuration (examples) FR-43 to FR-44
- default client IP address (examples) FR-43 to FR-44
- configuration
- (example) FR-42 to FR-46
- configuration command script
- (example) FR-44
- configuration file, saving FR-41, FR-46
- entering FR-40
- entering after erasing configuration FR-41
- global parameters
- configuration (example) FR-42
- interface parameters
- configuration (example) FR-42 to FR-46
- interface summary, viewing FR-42
- prerequisite knowledge FR-40
- sample configuration FR-42 to FR-46
- System Configuration Dialog FR-40
- (example) FR-42
- returning to privileged EXEC prompt FR-41
- terminating the configuration FR-42
- set weight command P1R-436
- sgbp group command DR-680
- sgbp member command DR-681
- sgbp seed-bid command DR-683
- show access-lists command P1R-162
- show accounting command SR-49
- show aliases command FR-887
- show apollo arp command P3R-11
- show apollo interface command BR-393, P3R-12
- show apollo route command P3R-14
- show apollo traffic command P3R-16
- show appletalk access-lists command P2R-111
- show appletalk adjacent-routes command P2R-113
- show appletalk arp command P2R-115
- show appletalk aurp events command P2R-117
- show appletalk aurp topology command P2R-118
- show appletalk cache command P2R-120
- show appletalk domain command P2R-122
- show appletalk eigrp interfaces command P2R-124
- show appletalk eigrp neighbors command P2R-126
- show appletalk eigrp topology command P2R-128
- show appletalk globals command P2R-132
- show appletalk interface command P2R-135
- show appletalk macip-clients command P2R-139
- show appletalk macip-servers command P2R-140
- show appletalk macip-traffic command P2R-143
- show appletalk name-cache command P2R-145
- show appletalk nbp command P2R-147
- show appletalk neighbors command P2R-126, P2R-149
- show appletalk remap command P2R-152
- show appletalk route command P2R-155
- show appletalk sockets command P2R-160
- show appletalk static command P2R-162
- show appletalk traffic command P2R-164
- show appletalk zone command P2R-170
- show appn class-of-service command BR-648
- show appn connection-network command BR-651
- show appn directory command BR-653
- show appn dlur-lu command BR-655
- show appn dlur-pu command BR-657
- show appn dlus command BR-659
- show appn intermediate-session command BR-661
- show appn link-station command BR-663
- show appn mode command BR-666
- show appn node command BR-667
- show appn port command BR-669
- show appn rtp command BR-672
- show appn session command BR-674
- show appn topology command BR-676
- show arap command DR-574
- show arp command WR-195
- show async-bootp command FR-289
- show async status command DR-46
- show atm arp-server command WR-68
- show atm interface atm command WR-70
- show atm map command WR-73
- show atm traffic command WR-75
- show atm vc command WR-76
- show boot command FR-258
- show bootflash command FR-216
- show bridge circuit group command BR-67
- show bridge command BR-64
- show bridge group command BR-69
- show bridge multicast command BR-70
- show bridge vlan command BR-72
- show bsc command BR-334
- show bstun command BR-338
- show buffers command FR-706, FR-735
- show c7200 command FR-791
- show calendar command FR-888
- show cdp command FR-628
- show cdp entry command FR-629
- show cdp interface command FR-631
- show cdp neighbors command FR-632
- show cdp traffic command FR-634
- show clns cache command P3R-275
- show clns command P3R-273
- show clns es-neighbors command P3R-276
- show clns filter-expr command P3R-278
- show clns filter-set command P3R-279
- show clns interface command P3R-280
- show clns is-neighbors command P3R-282
- show clns neighbors command P3R-284
- show clns protocol command P3R-286
- show clns route command P3R-289
- show clns traffic command P3R-291
- show clock command FR-889
- show cmns command WR-239
- show configuration command
- See show startup-config command
- show context command FR-792
- show controllers bri command DR-169
- show controllers e1 command DR-251
- show controllers serial command DR-254
- show controllers t1 command DR-254
- show controllers token command BR-137
- show crypto algorithms command SR-207
- show crypto card command SR-208
- show crypto connections command SR-209
- show crypto engine brief command SR-211
- show crypto engine configuration command SR-213
- show crypto engine connections active command SR-215
- show crypto engine connections dropped-packets command SR-217
- show crypto key-timeout command SR-218
- show crypto map command SR-219
- show crypto map interface command SR-222
- show crypto map tag command SR-224
- show crypto mypubkey command SR-226
- show crypto pregen-dh-pairs command SR-227
- show crypto pubkey command SR-228
- show crypto pubkey name command SR-229
- show crypto pubkey serial command SR-230
- show debugging command FR-794
- show decnet accounting command P3R-163
- show decnet command P3R-161
- show decnet interface command P3R-165
- show decnet map command P3R-169
- show decnet neighbors command P3R-170
- show decnet route command P3R-171
- show decnet static command P3R-173
- show decnet traffic command P3R-175
- show dhcp command DR-524
- show dialer command DR-173, DR-626, DR-649
- display for active connection DR-174, DR-629, DR-652
- display for DTR dialing DR-628, DR-651
- show dialer interface async command DR-627, DR-651
- show dialer interface bri command DR-173, DR-626, DR-649
- show dialer map command DR-710
- show dlsw capabilities command BR-279
- show dlsw circuits command BR-281
- show dlsw fastcache command BR-283
- show dlsw peers command BR-284
- show dlsw reachability command BR-286
- show dlsw statistics command BR-289
- show dnsix command SR-280
- show dspu command BR-509
- show dxi map command WR-81
- show dxi pvc command WR-82
- show entry command DR-346
- show environment command FR-795
- show extended channel cmpc command BR-757
- show extended channel icmp-stack command BR-759
- show extended channel ip-stack command BR-760
- show extended channel llc2 command BR-761
- show extended channel statistics command BR-762
- show extended channel subchannel command BR-765
- show extended channel tcp-stack command BR-768
- show extended channel tg command BR-769
- show extended channel tn3270-serve pu lu command BR-788
- show extended channel tn3270-server client-ip-address command BR-777
- show extended channel tn3270-server command BR-774
- show extended channel tn3270-server dlur command BR-780
- show extended channel tn3270-server dlurlink command BR-782
- show extended channel tn3270-server nailed-ip command BR-784
- show extended channel tn3270-server pu command BR-785
- show extended channel udp-listeners command BR-791
- show extended channel udp-stack command BR-792
- show file command FR-149
- show flash all command FR-221, FR-226
- show flash chips bootflash command FR-226
- show flash chips command FR-224, FR-228
- show flash command FR-217
- show flash detailed command FR-224, FR-228
- show flash devices command FR-229
- show flash err command FR-224, FR-228
- show flash filesys command FR-226
- show flash summary command FR-225
- show flh-log command FR-167
- show frame-relay ip rtp header-compression command P1R-635
- show frame-relay ip tcp header-compression command WR-170
- show frame-relay lapf command WR-172
- show frame-relay lmi command WR-174
- show frame-relay map command WR-176
- show frame-relay pvc command WR-178
- show frame-relay qos-autosense command WR-182
- show frame-relay route command WR-184
- show frame-relay svc maplist command WR-185
- show frame-relay traffic command WR-188
- show fras command BR-546
- show fras-host command BR-548
- show fras map command BR-550
- show gt64010 command FR-804
- show history command FR-30
- show interface command P3R-69
- show interfaces atm command WR-84
- show interfaces bri command DR-176
- show interfaces channel command BR-793
- show interfaces command BR-406, BR-434, DR-152, DR-766
- channelized E1 DR-229
- channelized T1 DR-229
- configuring interfaces WR-60
- DDR interface DR-629, DR-652
- show interfaces crb command BR-73
- show interfaces irb command BR-75
- show interfaces serial command WR-189, WR-241
- show interfaces tokenring command BR-142
- show interface virtual-access command DR-420
- show ip access-list command P1R-164
- show ip accounting command P1R-165, SR-118
- show ip bgp cidr-only command P1R-441
- show ip bgp command P1R-438
- show ip bgp community command P1R-443
- show ip bgp community-list command P1R-445
- show ip bgp dampened-paths command P1R-447
- show ip bgp filter-list command P1R-448
- show ip bgp flap-statistics command P1R-450
- show ip bgp inconsistent-as command P1R-452
- show ip bgp neighbors P1R-453
- show ip bgp neighbors command P1R-453
- show ip bgp paths command P1R-457
- show ip bgp peer-group command P1R-458
- show ip bgp regexp command P1R-459
- show ip bgp summary command P1R-460
- show ip cache command XR-16
- show ip cache flow command XR-18
- show ip drp command P1R-168
- show ip dvmrp route command P1R-637
- show ip eigrp interfaces command P1R-328
- show ip eigrp neighbors command P1R-330
- show ip eigrp topology command P1R-332
- show ip eigrp traffic command P1R-334
- show ip igmp groups command P1R-638
- show ip igmp interface command P1R-640
- show ip local policy command P1R-544
- show ip local-pool command DR-526
- show ip mcache command P1R-642
- show ip mpacket command P1R-643
- show ip mroute command P1R-645
- show ip nat statistics command DR-788
- show ip nat translations command DR-790
- show ip ospf border-routers command P1R-287
- show ip ospf command P1R-285
- show ip ospf database command P1R-288
- show ip ospf interface command P1R-296
- show ip ospf neighbor command P1R-298
- show ip ospf virtual-links command P1R-300
- show ip pim interface command P1R-650
- show ip pim neighbor command P1R-652
- show ip pim rp command P1R-654
- show ip pim vc command P1R-656
- show ip policy command P1R-546
- show ip protocols command P1R-548
- show ip route command P1R-552
- show ip route summary command P1R-556
- show ip route supernets-only command P1R-557
- show ip rpf command P1R-658
- show ip rsvp installed command P1R-196
- show ip rsvp interface command P1R-195
- show ip rsvp neighbor command P1R-197
- show ip rsvp request command P1R-198
- show ip rsvp reservation command P1R-199
- show ip rsvp sender command P1R-200
- show ip rtp header-compression command P1R-659
- show ip sdr command P1R-661
- show ip tcp header-compression command P1R-169
- show ip traffic command P1R-171
- show ipx access-list command P2R-413
- show ipx accounting command P2R-414
- show ipx cache command P2R-416
- show ipx eigrp interfaces command P2R-417
- show ipx eigrp neighbors command P2R-419
- show ipx eigrp topology command P2R-421
- show ipx interface command P2R-425
- show ipx nasi connections command DR-667
- show ipx nhrp command P2R-430
- show ipx nhrp traffic command P2R-432
- show ipx nlsp database command P2R-434
- show ipx nlsp neighbors command P2R-437
- show ipx nlsp spf-log command P2R-440
- show ipx route command P2R-442
- show ipx servers command P2R-446
- show ipx spx-protocol command DR-669
- show ipx spx-spoof command P2R-449
- show ipx traffic command P2R-451
- show isdn active command
- field descriptions (table) DR-181, DR-258, DR-278
- output display DR-180, DR-257, DR-277
- show isdn command DR-180, DR-257, DR-277
- show isdn history command
- field descriptions (table) DR-181, DR-258, DR-278
- output display DR-181, DR-258, DR-278
- show isdn nfas group command DR-279
- field descriptions (table) DR-280
- show isdn service command DR-282
- field descriptions (table) DR-259, DR-282
- output display DR-258
- show isdn status command DR-273
- field descriptions (table) DR-260
- output display DR-259
- show isis database command P1R-358, P3R-293
- show isis routes command P3R-296
- show isis spf-log command P1R-361, P3R-297
- show kerberos creds command SR-105
- show key chain command P1R-558
- show keymap command DR-347
- show lane bus command XR-57
- show lane client command XR-59
- show lane command XR-54
- show lane config command XR-62
- show lane database command XR-64
- show lane default-atm-addresses command XR-66
- show lane le-arp command XR-68
- show lane server command XR-70
- show lat advertised command DR-348
- show lat groups command DR-349
- show lat nodes command DR-350
- show lat services command DR-352
- show lat sessions command DR-353
- show lat traffic command DR-356
- show line command DR-48
- show llc2 command BR-409, WR-244
- show lnm bridge command BR-146
- show lnm config command BR-147
- show lnm interface command BR-149
- show lnm ring command BR-152
- show lnm station command BR-153
- show local-ack command BR-211, BR-439
- show logging command FR-767, FR-771, FR-780, FR-805
- show memory command FR-807
- show microcode command FR-169
- show modem at-mode command DR-102
- show modem call-stats command DR-103
- show modemcap command DR-51, DR-84
- show modem command DR-94
- show modem connect-speeds command DR-108
- show modem cookie command DR-112
- show modem csm command DR-113
- show modem log command DR-115
- show modem summary command DR-117
- show modem test command DR-118
- show modem version command DR-119
- show nbf cache command DR-54
- show nbf sessions command DR-55
- show ncia circuits command BR-709
- show ncia client command BR-711
- show ncia server command BR-714
- show netbios-cache command BR-155
- show node command DR-358
- show ntp associations command FR-890
- show ntp status command FR-893
- show pci command FR-811
- show ppp bap command DR-712
- show ppp multilink command DR-528, DR-683, DR-714
- show privilege command SR-249
- show processes command FR-813
- show processes memory command FR-816
- show protocols command FR-818
- show qllc command BR-437
- show queueing command FR-739
- show reload command FR-260
- show rif command BR-156
- show rmon alarms command FR-637
- show rmon capture command FR-639
- show rmon command FR-635
- show rmon events command FR-641
- show rmon filter command FR-643
- show rmon history command FR-645
- show rmon hosts command FR-648
- show rmon matrix command FR-650
- show rmon statistics command FR-652
- show rmon topn command FR-655
- show route-map command P1R-559, P3R-299
- show rtr application command FR-657
- show rtr collection-statistics command FR-658
- show rtr configuration command FR-660
- show rtr distribution-statistics command FR-662
- show rtr history command FR-664
- show rtr operational-state command FR-666
- show rtr reaction-trigger command FR-668
- show rtr totals-statistics command FR-669
- show running-config command FR-151
- show service command DR-361
- show sgbp command DR-685
- show sgbp queries command DR-684, DR-686
- show smds addresses command WR-197
- show smds map command WR-198
- show smds traffic command WR-199
- show smrp forward command P2R-172
- show smrp globals command P2R-174
- show smrp group command P2R-176
- show smrp mcache command P2R-178
- show smrp neighbor command P2R-180
- show smrp port command P2R-182
- show smrp route command P2R-184
- show smrp traffic command P2R-186
- show sna command BR-511
- show snapshot command DR-740
- show snmp command FR-671
- show sntp command FR-895
- show source-bridge command BR-158
- show span command BR-77, BR-161, BR-166, BR-189
- show sscop command WR-89
- shows sessions command DR-363
- show sse summary command BR-79, BR-162, P1R-173, P2R-455
- show stacks command FR-819
- show standby command P1R-173
- show startup-config command FR-152
- show stun command BR-340
- show tarp command P3R-301
- show tarp host command P3R-304
- show tarp interface command P3R-305
- show tarp ldb command P3R-306
- show tarp map command P3R-307
- show tarp static-adjacencies command P3R-308
- show tarp tid-cache command P3R-309
- show tarp traffic command P3R-311
- show tcp brief command DR-370, FR-825
- show tcp command DR-364, FR-820
- show tcp intercept connections command SR-144
- show tcp intercept statistics command SR-146
- show tcp statistics command P1R-175
- show tdm connections command FR-826
- show tdm connections motherboard command
- channel output, interpreting FR-826
- show tdm data command FR-827
- show tech-support command FR-828
- show terminal command DR-137
- show traffic-shape command FR-741
- show traffic-shape statistics command FR-743
- show translate command DR-424
- show ttycap command DR-373
- show users command DR-57, DR-426
- show version command FR-261
- show vines access command P3R-26
- show vines cache command P3R-27
- show vines host command P3R-29
- show vines interface command P3R-30
- show vines ipc command P3R-33
- show vines neighbor command P3R-35
- show vines route command P3R-39
- show vines service command P3R-42
- show vines traffic command P3R-45
- show vlans command BR-80
- show vpdn command DR-749
- show x25 interface command WR-247
- show x25 map command WR-248
- show x25 pad command DR-480
- show x25 remote-red command WR-250
- show x25 route command WR-251
- show x25 services command WR-252
- show x25 vc command WR-253
- show x25 xot command WR-260
- show xns cache command P3R-355
- show xns interface command P3R-356
- show xns route command P3R-358
- show xns traffic command P3R-360
- show xremote command DR-374
- show xremote line command DR-376
- shutdown
- enabling for SNMP FR-689
- shutdown command BR-797, WR-39
- signals
- Break DR-814
- pulsing DTR DR-201
- SIG-TS-001/1991 standard WR-202
- Silicon Switch Processor
- See SSP
- simple LANE service replication XR-52
- Simple Multicast Routing Protocol
- See SMRP
- Simple Network Management Protocol
- See SNMP
- single-character patterns
- anchoring DR-823
- creating DR-820
- description DR-820
- using multipliers DR-822
- single DDR telephone number
- specifying DR-595
- single DDR telephone number, specifying DR-622, DR-645
- slave auto-sync config command FR-265
- slave default-slot command FR-266
- slave image
- See HSA
- slave image command FR-267
- slave reload command FR-269
- slave sync config command FR-270
- SLIP
- connections to server DR-554 to DR-555
- session
- automatic startup DR-536
- session, automatic startup DR-536
- slip command DR-554
- SMDS
- addresses
- bridging's effect on WR-201
- broadcast WR-206, WR-208
- MAC address map to WR-195
- multicast WR-206, WR-208
- address resolution (ARP) WR-206
- address specification WR-201
- AppleTalk on WR-206
- ARP WR-204
- assigned address display WR-197, WR-198
- ATM WR-47
- bridging WR-209
- broadcast ARP messages WR-208
- DECnet on WR-206
- disabling split horizon P1R-215, P1R-231
- DXI 3.2 with heartbeat WR-202
- dynamic routing WR-205
- enabling via encapsulation WR-193
- fast switched IPX P2R-346
- general statistics WR-199
- IP address and subnet mask on WR-208
- IP on WR-207
- IPX on WR-207
- ISO CLNS on WR-206
- maximum packet size WR-193
- multiple logical IP subnetworks WR-194, WR-209, WR-211
- protocols supported WR-206
- static routing table
- configuring WR-213
- displaying WR-198
- protocols supported WR-213
- subinterfaces for multiple IP subnetworks WR-194
- VINES on WR-207
- smds address command WR-201
- smds-dest-address command BR-679
- smds dxi command WR-202
- smds enable-arp command WR-204
- smds glean command WR-205
- smds multicast arp command WR-208
- smds multicast bridge command WR-209
- smds multicast command WR-206
- smds multicast ip command WR-211
- smds static-map command WR-213
- SMRP P2R-194
- fast switching, enabling P2R-192
- forwarding table P2R-172
- fields (table) P2R-173
- global information P2R-174
- group address P2R-176
- group table
- displaying P2R-176
- field descriptions (table) P2R-177
- multicast services over AppleTalk, enabling P2R-194
- neighbor P2R-180
- neighbor table
- displaying P2R-181
- field descriptions (table) P2R-181
- port table P2R-182
- displaying P2R-182
- field descriptions (table) P2R-183
- routing table
- displaying P2R-184
- field descriptions (table) P2R-185
- traffic table
- displaying P2R-186
- field descriptions (table) P2R-187
- smrp mroute-cache protocol appletalk command P2R-192
- smrp protocol appletalk command P2R-194
- smrp routing command P2R-196
- SMTP
- port number FR-720
- SNA
- monitoring BR-511
- Service Point
- activating BR-526
- Ethernet interface, defining BR-521
- Ethernet interface, enabling BR-514
- Frame Relay interface, defining BR-515
- Frame Relay interface, enabling BR-514
- monitoring BR-511
- QLLC
- data link, defining BR-517
- QLLC data link
- enabling BR-512
- RSRB
- activating BR-525
- service access point, enabling BR-524
- RSRB connection BR-521
- SDLC data link
- enabling BR-513
- SDLC data link, defining BR-519
- Token Ring interface
- defining BR-521
- Token Ring interface, enabling BR-514
- virtual data link control connection
- activating BR-530
- service access point, enabling for upstream host BR-529
- virtual data link control connection, configuration (example) BR-527
- virtual data link control connection, virtual ring, defining BR-527
- traffic prioritization, configuring BR-213
- sna enable-host command
- Ethernet BR-514
- Frame Relay BR-514
- QLLC BR-512
- SDLC BR-513
- Token Ring BR-514
- sna host command
- Ethernet BR-521
- FDDI BR-521
- Frame Relay BR-515
- QLLC BR-517
- RSRB BR-521
- SDLC BR-519
- Token Ring BR-521
- virtual data link control) BR-521
- SNAP packet encapsulation
- assigning access list to filter
- on input BR-174
- on output BR-180
- filtering
- frames on output BR-180
- on input BR-31
- filtering on output BR-39
- snapshot client command DR-742
- snapshot routing DR-737 to DR-744
- dialer map, defining for DDR DR-739
- quiet period, ending DR-738
- when to use DR-737
- snapshot server command DR-744
- sna rsrb command BR-523
- sna rsrb enable-host command BR-524
- sna rsrb start command BR-525
- sna start command BR-526
- sna vdlc command BR-527
- sna vdlc enable-host command BR-529
- sna vdlc start command BR-530
- SNMP
- configuration parameters, displaying FR-805
- message queue length FR-688
- packet filtering FR-686
- port number FR-720
- system contact, setting FR-677
- system location, setting FR-685
- system shutdown, enabling FR-689
- trap message
- source, setting FR-692
- timeout FR-693
- trap operation
- enabling FR-679
- recipient FR-682
- snmp-server access-policy command FR-673
- snmp-server chassis-id command FR-674
- snmp-server community command FR-675
- snmp-server contact command FR-677
- snmp-server context command FR-678
- snmp-server enable trap command FR-771
- snmp-server enable traps command FR-679
- snmp-server host command FR-682
- snmp-server location command FR-685
- snmp-server packet-size command FR-686
- snmp-server party command FR-687
- snmp-server queue-length command FR-688
- snmp-server system-shutdown command FR-689
- snmp-server tftp-server-list command FR-690
- snmp-server trap-authentication command
- See snmp-server enable traps command
- snmp-server trap-source command FR-692
- snmp-server trap-timeout command FR-693
- snmp-server view command FR-694
- snmp trap link-status command FR-696
- SNPA
- cluster alias P3R-193
- NSAP
- mapping P3R-200, P3R-208
- sntp broadcast client command FR-896
- sntp server command FR-898
- socket numbers (table) P2R-208
- soft reconfiguration P1R-417
- software compression WR-142, WR-151
- configuring DR-190
- PPP, configuring DR-492
- software configuration boot register
- See boot field
- software flow control
- configuring for a line DR-15
- SONET PLIM
- ATM
- (example) WR-48
- configuring WR-48
- source-bridge command BR-163, BR-551
- source-bridge connection-timeout command BR-165
- source-bridge cos-enable command BR-213
- source-bridge enable-80d5 command BR-166
- source-bridge explorer-dup-ARE-filter command BR-168
- source-bridge explorer-fastswitch command BR-169
- source-bridge explorer-maxrate command BR-170
- source-bridge explorerq-depth command BR-171
- source-bridge fst-peername command BR-214, BR-441
- source-bridge input-address-list command BR-172
- source-bridge input-lsap-list command BR-173
- source-bridge input-type-list command BR-174
- source-bridge keepalive command BR-215
- source-bridge largest-frame command BR-216
- source-bridge max-hops command BR-175
- source-bridge max-in-hops command BR-176
- source-bridge max-out-hops command BR-177
- source-bridge output-address-list command BR-178
- source-bridge output-lsap-list command BR-179
- source-bridge output-type-list command BR-180
- source-bridge passthrough command BR-217
- source-bridge proxy-explorer command BR-181
- source-bridge proxy-netbios-only command BR-182
- source-bridge qllc-local-ack command BR-442
- source-bridge remote-peer frame-relay command (direct encapsulation) BR-219
- source-bridge remote-peer fst command BR-221, BR-443
- source-bridge remote-peer ftcp command BR-223
- source-bridge remote-peer interface command BR-445
- source-bridge remote-peer tcp command BR-225, BR-447
- source-bridge ring-group command BR-183
- source-bridge route-cache cbus command BR-186
- source-bridge route-cache command BR-185
- source-bridge route-cache sse command BR-188
- source-bridge sap-80d5 command BR-189
- source-bridge sdllc-local-ack command BR-451
- source-bridge spanning command
- automatic BR-191
- manual BR-192
- source-bridge tcp-queue-max command BR-227
- source-bridge transparent command BR-193
- source-bridge transparent fastswitch command BR-195
- source-route translational bridging
- See SR/TLB
- spanning explorer packets, definition BR-192
- spanning explorers, enabling BR-191, BR-192
- spanning tree
- domain
- assigning BR-18
- multiple bridge loops with BR-18
- protocol
- defining type to use BR-51
- disabling BR-42
- topology, displaying BR-77
- speed command DR-141
- spf-interval command P2R-456
- split horizon
- AppleTalk Enhanced IGRP P2R-50
- IP Enhanced IGRP P1R-318
- IPX Enhanced IGRP P2R-367
- ISO IGRP P3R-225
- VINES P3R-85
- spoofing
- DDR DR-629, DR-652
- IPX P2R-384
- SPX
- enabling P2R-369
- setting the idle time P2R-368
- watchdog packets P2R-368, P2R-369, P2R-384
- SPX
- connections spoofing is enabled for P2R-449
- spoofing
- enabling P2R-369
- setting the idle time P2R-368
- squeeze command FR-230
- SR/TLB
- enabling BR-193
- fast-switching mode, disabling BR-195
- SRB
- configuration, displaying BR-158
- connection timeout interval, setting BR-165
- explorer packets, configuring BR-192
- hops, limiting the number of BR-175, BR-176, BR-177
- information about, displaying BR-142
- SSCOP
- ATM WR-89
- connection control timer (example) WR-91
- receiver window (example) WR-95
- retry count (example) WR-93
- transmitter window (example) WR-96
- sscop cc-timer command WR-91
- sscop keepalive-timer command WR-92
- sscop max-cc command WR-93
- sscop poll-timer command WR-94
- sscop rcv-window command WR-95
- sscop send-window command WR-96
- SSE fast switching
- reinitializing BR-55
- SRB BR-188
- statistics, displaying BR-79, BR-162
- transparent bridging BR-44
- SSP
- reinitializing BR-55, BR-94
- statistics, displaying BR-79, BR-162
- stack group
- bidding
- default across stack members DR-683
- offload server DR-683
- overriding offload or default DR-684
- bid value on system, displaying DR-686
- configuration (example) DR-681
- create and name DR-680
- master bundle interface, host DR-683
- member
- assigning DR-680
- host name DR-681
- IP address DR-681
- receiver, first call, master bundle interface host DR-683
- standard access list, IP P1R-115
- named P1R-135
- standard access list, IPX
- named P2R-248
- standard OUI form, specifying BR-59, BR-95
- standby ip command P1R-178
- standby preempt command P1R-180
- standby priority command P1R-180
- standby timers command P1R-182
- standby track command P1R-183
- standby use-bia command P1R-185
- start character
- configuring for a line DR-59, DR-142
- default DR-15
- start-character command DR-59, DR-142
- start-chat command DR-60
- startup configuration file
- copying from rcp server
- (example) FR-193
- copying to server FR-194
- static maps
- ATM
- configuring WR-66
- displaying WR-73
- static routes
- Apollo Domain P3R-7
- AppleTalk P2R-88, P2R-90
- CLNS
- interface P3R-214
- redistributing P3R-262
- TARP mapping P3R-320, P3R-329
- configuring P1R-481
- IP
- establishing P1R-481
- redistributing P1R-509
- IPX P2R-343
- SMDS
- configuring WR-213
- displaying WR-198
- VINES P3R-77
- XNS P3R-376
- static TEI DR-769
- statistics-distribution-interval command FR-697
- statistics for RTR
- displaying FR-658, FR-662, FR-697
- distributions kept FR-598
- hops kept FR-603
- hours kept FR-604
- paths kept FR-607
- stop character
- configuring for a line DR-62
- default DR-15
- stop-character command DR-62
- streamlined setup facility FR-41
- (example) FR-47
- booting from network server
- interface IP parameters, configuring FR-47
- configuration, corrupted startup FR-41
- configuration register FR-41
- rxboot ROM FR-41
- string
- SNMP community access, setting FR-675
- system contact, setting FR-677
- system location, setting FR-685
- stub area
- See OSPF
- stub IP multicast routing P1R-587
- STUN
- connection status
- displaying BR-338, BR-340
- frames
- forwarding BR-349, BR-350
- interface
- configuring BR-318
- placing in a group BR-342
- IP addresses, enabling BR-345
- non-SDLC protocol, defining BR-355
- peer connection BR-344
- stun group command BR-342
- stun keepalive-count command BR-344
- stun peer-name command BR-345
- stun protocol-group command BR-346
- stun remote-peer-keepalive command BR-348
- stun route address interface dlci command BR-349
- stun route address interface serial command BR-350
- stun route address tcp command BR-351
- stun route all interface serial command BR-353
- stun route all tcp command BR-354, BR-357
- stun schema offset length format command BR-355
- stun sdlc-role primary command BR-357
- stun sdlc-role secondary command BR-358
- subinterfaces
- BRI multipoint, point-to-point DR-766
- IPX P2R-302
- ISDN BRI DR-152, DR-766
- multipoint, point-to-point DR-152
- NLSP P2R-302
- configuring (example) P2R-303
- Subnetwork Access Protocol
- See SNAP
- subnetwork point of attachment
- See SNPA
- summary address
- IP Enhanced IGRP P1R-319
- summary-address command P1R-301, P1R-363
- sustainable cell rate
- backward (example) WR-10, WR-11
- forward (example) WR-22, WR-23
- SVC
- clearing XOT WR-220
- disabling
- (example) WR-45
- description WR-45
- switched PVCs
- See PVC, X.25
- switching
- autonomous XR-11
- fast XR-11
- flow XR-11
- flow switching XR-9, XR-11
- Frame Relay, specifying static route for WR-158
- IP
- controlling the route cache XR-11
- NetFlow XR-2, XR-15
- enabling XR-14
- optimum XR-11
- specifying static route for WR-158
- VIP distributed XR-11
- switching feature (example) DR-825
- synchronization, definition P1R-462
- synchronization command P1R-462
- Synchronous Data Link Control
- See SDLC
- syslog history table
- information, displaying FR-805
- system buffer
- See buffers
- system contact string
- setting FR-677
- system error messages
- redirecting FR-775
- system ID messages, controlling MOP DR-346
- system images
- checksum, verifying FR-170, FR-174
- compressed FR-247
- copying from a server using rcp FR-247
- copying from server to Flash (example) FR-188
- copying using Xmodem FR-176
- copying using Ymodem FR-176
- default filename FR-246
- invalidated FR-221, FR-223
- system location string
- setting FR-685
- system shutdown
- enabling for SNMP FR-689
- Systems Network Architecture
- See SNA
- system software
- booting FR-244, FR-246
- displaying version of FR-261
- T1 timer, SDLC BR-401
- table-map command P1R-463
- TACACS
- command comparison
- (table) SR-67 to SR-68
- username authentication for extended mode DR-531
- tacacs-server attempts command SR-74
- tacacs-server authenticate command SR-75
- tacacs-server directed-request command SR-77
- tacacs-server extended command SR-78
- tacacs-server host command SR-79
- tacacs-server key command SR-81
- tacacs-server last-resort command SR-82
- tacacs-server login-timeout command SR-83
- tacacs-server notify command SR-84
- tacacs-server optional-passwords command SR-85
- tacacs-server retransmit command SR-86
- tacacs-server timeout command SR-87
- tag command FR-698
- target identifier
- See TID
- Target Identifier Address Resolution Protocol
- See TARP
- TARP
- blacklist adjacency
- listing P3R-303
- setting P3R-314
- cache
- enabling P3R-312
- setting timer P3R-315
- counters, clearing P3R-186
- enabling P3R-330
- global parameters, displaying P3R-301
- host, displaying P3R-304
- interface
- displaying P3R-305
- enabling on P3R-316
- enabling propagation P3R-324
- loop detection buffer
- clearing table P3R-187
- displaying table P3R-306
- setting timer P3R-318
- NSAP-to-TID
- querying map P3R-326
- N-selector type, setting P3R-321
- packet lifetime, setting P3R-319
- PDUs
- global propagation P3R-317
- originating P3R-322
- protocol, specifying P3R-325
- sequence number, setting P3R-331
- static adjacency
- displaying P3R-308
- setting P3R-329
- static map
- displaying P3R-307
- setting P3R-320
- TID
- assigning P3R-334
- cache, displaying P3R-309
- clearing table P3R-188
- timeouts
- type 1, setting P3R-332
- type 2, setting P3R-323, P3R-333
- type 5, setting P3R-313
- traffic, displaying P3R-311
- URC bit, setting P3R-335
- tarp arp-request-timer command P3R-313
- tarp blacklist-adjacency command P3R-314
- tarp cache-timer command P3R-315
- tarp enable command P3R-316, P3R-324
- tarp global-propagate command P3R-317
- tarp ldb-timer command P3R-318
- tarp lifetime command P3R-319
- tarp map command P3R-320
- tarp nselector-type command P3R-321
- tarp originate command P3R-322
- tarp post-t2-response-timer command P3R-323
- tarp protocol-type command P3R-325
- tarp query command P3R-326
- tarp resolve command P3R-327
- tarp route-static command P3R-329
- tarp run command P3R-330
- tarp sequence-number command P3R-331
- tarp t1-response-timer command P3R-332
- tarp t2-response-timer command P3R-333
- tarp tid command P3R-303, P3R-334
- tarp urc command P3R-335
- TCP
- common services FR-720
- connection
- enabling MD5 authentication for BGP P1R-406
- enabling Path MTU Discovery P1R-151
- setting connection-attempt time P1R-154
- encapsulation
- configuring SRB for BR-225, BR-447
- enabling use on STUN interface BR-354
- specifying for STUN BR-351
- header compression, disabling conflicting features P1R-153, P1R-155
- keepalive protocol, activating FR-788
- maximum read size P1R-148
- outgoing queue size P1R-152
- ports, prioritizing FR-721
- protocol translation DR-429, DR-430, DR-437, DR-439, DR-443, DR-448
- selective acknowledgment P1R-153
- timestamp P1R-155
- window size P1R-156
- TCP/IP
- rlogin connections DR-343, DR-344
- Telnet connections DR-378
- TCP/IP header compression
- on interface WR-126
- inheritance, effect on all IP maps WR-126
- on IP map WR-147
- inheriting compression from interface WR-147
- overriding compression from interface WR-147
- on X.25 WR-289
- TCP Intercept
- enabling SR-133
- modes
- intercept mode SR-138
- watch mode SR-138
- timeouts SR-132
- tcp-port command BR-798
- technical publications and standards FR-909
- technical support information
- displaying FR-828
- telephone delta, in PPP BACP negotiations DR-703
- Telnet
- addresses, suppressing FR-882
- connections DR-378 to DR-381
- configuring a line DR-384
- port number FR-720
- description DR-379
- generating Break signal DR-382
- login string DR-339
- notification of pending output DR-340
- protocol translation DR-429, DR-430, DR-437, DR-439, DR-443, DR-448
- Remote Echo option DR-383
- special commands (table) DR-380
- Suppress Go Ahead option DR-383
- telnet break-on-ip command DR-382
- telnet command DR-378, SR-106
- telnet refuse-negotiations command DR-383
- telnet speed command DR-384
- telnet sync-on-break command DR-385
- telnet transparent command DR-386
- terminal
- absolute timeout interval, setting DR-126
- baud rate
- receive, configuring for a line DR-134
- transmit, configuring for a line DR-149
- locking access to DR-334
- parameter settings, displaying DR-137
- selecting a transport protocol DR-388
- session limits, setting DR-135
- session timeout interval, setting DR-136
- Terminal Access Controller Access Control System
- See TACACS
- terminal dispatch-character command DR-812
- terminal editing command FR-31
- terminal full-help command FR-34
- terminal history command FR-36
- terminal international command FR-38
- terminal lat out-group command DR-387
- terminal services DR-125
- terminal sessions
- closing FR-10
- terminal transport preferred command DR-388
- test appletalk command P2R-197
- test crypto initiate-session command SR-231
- test flash command FR-830
- test interfaces command FR-831
- test memory command FR-832
- test modem back-to-back command DR-124
- Texas Instruments Token Ring MAC firmware
- known defect BR-110
- TFTP
- port number BR-200, BR-205, FR-720
- server
- booting automatically FR-244
- router, configuring to function as FR-290
- tftp-server command FR-290
- tftp-server system command
- See tftp-server command
- tg command BR-799
- tg-number command BR-680
- tg-row command BR-681
- threshold command FR-699
- tick count
- IPX P2R-269
- TID
- displaying cache P3R-309
- NSAP
- mapping, enabling P3R-312
- querying P3R-326
- NSAP-to-TID
- mapping P3R-320
- router, assigning P3R-334
- table, clearing P3R-188
- time limit, setting for a session DR-569
- timeout command FR-700
- timeout interval
- EXEC process, setting DR-14
- trap message FR-693
- timeouts
- absolute DR-126
- session, setting DR-136
- setting for DDR interface DR-600
- timers
- AppleTalk Enhanced IGRP P2R-51
- BGP, adjusting P1R-464
- DECnet P3R-124, P3R-153
- Frame Relay keepalive WR-164
- IP Enhanced IGRP, adjusting P1R-316, P1R-317
- ISO IGRP, adjusting P3R-336
- LAPB
- interface outage WR-226
- link failure (T4) WR-234
- T1 retransmission WR-233
- T4 relation to T1 WR-234
- service advertisement, setting DR-331
- TARP
- cache entries P3R-315
- loop detection buffer table P3R-318
- type 1 response P3R-332
- type 2 response P3R-323, P3R-333
- type 5 timeout P3R-313
- X.25
- call request (t21) WR-323
- clear indication (t13) WR-321
- clear request (t23) WR-325
- hold timer, setting WR-272
- incoming call (t11) WR-319
- reset indication (t12) WR-320
- reset request (t22) WR-324
- restart indication (t10) WR-318
- restart request (t20) WR-322
- timers basic command P1R-205, P1R-222, P1R-244, P3R-336
- timers bgp command P1R-464
- timers spf command P1R-303
- timeslot command DR-202
- timestamp
- TCP P1R-155
- timing-mark command BR-802
- TN3270
- character mapping
- creating DR-392
- determining DR-371
- displaying DR-372
- connections to server DR-389
- data character bits, setting DR-390, DR-391
- default keymaps DR-301
- description DR-389
- display size DR-287
- international characters
- displaying DR-371
- printing DR-392
- null processing handling DR-397
- require reset after user error DR-399
- special characters DR-300
- tn3270 8bit display command DR-390
- tn3270 8bit transparent-mode command DR-391
- tn3270 command DR-389
- tn3270 null-processing command DR-397
- tn3270 optimize-cursor-move command DR-398
- tn3270 reset-required command DR-399
- TN3270 server
- LU nailing
- client command BR-725
- show extended channel tn3270-server nailed-ip command BR-784
- TOS
- ip precedence command BR-737
- ip tos command BR-738
- TOS values, defined BR-738
- tn3270-server command BR-801
- tn3270 status-message command DR-400
- tn3270 typeahead command DR-401
- Token Ring
- APPN partner node, specifying BR-605
- controller, displaying information about BR-137
- DECnet encapsulation over P3R-123
- functional address P1R-608
- interface, displaying information about BR-142
- IP multicast routing over P1R-608
- LNM information for, displaying BR-152
- logical configuration of, monitoring BR-100
- polling frequency, configuring BR-368
- wait interval for an acknowledgment, configuring BR-364
- XID transmissions, specifying frequency of BR-376
- TokenTalk P2R-1
- topology table
- AppleTalk Enhanced IGRP P2R-128
- IPX Enhanced IGRP P2R-421
- trace
- common problems FR-837
- ISO CLNS
- IP routes P3R-339
- terminating P3R-337, P3R-339
- test characters (table) P3R-338
- terminating FR-837
- tracing IP routes FR-838
- trace command
- common problems FR-833
- extended test FR-833
- IP
- routes FR-834
- ISO CLNS
- privileged P3R-337
- user P3R-339
- privileged, overview FR-833
- terminating FR-833
- user, overview FR-837
- VINES P3R-50
- TraceRoute function, VINES P3R-50
- traffic priority management
- See fair queuing
- traffic-shape adaptive command FR-745
- traffic-shape group command FR-747
- traffic-shape rate command FR-749
- traffic shaping
- configuration, displaying FR-741
- interface independent FR-747, FR-748, FR-749
- statistics, displaying FR-743
- strict (example) WR-46
- strict, enabling WR-46
- traffic-share command P1R-246, P1R-335
- translate command DR-428, DR-437, DR-446
- translate lat command DR-434
- translate tcp command DR-443
- translate x25 command DR-454
- translation options
- LAT DR-428, DR-434, DR-438, DR-447
- outgoing options, mapping to virtual interface template commands DR-435, DR-456
- prevent service advertisements DR-428, DR-434
- swap outgoing X.25 connections DR-449, DR-455
- TCP
- binary mode DR-443
- incoming address DR-443
- TCP/IP
- PPP DR-429, DR-438, DR-447
- SLIP DR-428, DR-438, DR-447
- Telnet DR-428, DR-437, DR-447
- Telnet binary mode DR-437
- X.25 DR-428, DR-438, DR-446, DR-454
- Transmission Control Protocol
- See TCP
- transmission-priority command BR-683
- transmit-clock-internal command DR-203
- transmit clock signal
- inverting DR-199
- transmit-interface command P1R-186
- transmitter-delay command DR-204
- transparent bridging
- constrained multicast flooding
- enabling BR-16
- multicast state information
- displaying BR-70
- multicast state information, clearing BR-54
- interface restrictions BR-21
- SMDS WR-209
- transport input command DR-143
- transport output command DR-145
- transport preferred command DR-147
- transport protocol, selecting DR-388
- trap
- host, setting message queue length FR-688
- message
- establishing timeout FR-693
- source interface FR-692
- operation, enabling FR-679
- recipient, specifying FR-682
- triggers for RTR
- configuring FR-620, FR-622
- displaying FR-668
- Trivial File Transfer Protocol
- See TFTP
- troubleshooting
- modem access DR-802
- ts16 command DR-205
- ttycap command DR-402
- ttycap support DR-403
- tunnel
- VPDN
- shutting down, without unconfiguring DR-748
- tunnel command DR-406
- tunneling
- AppleTalk
- Cayman P2R-201
- X.25, enabling WR-314
- tunnel mode command P2R-201
- tunnel source command P2R-203
- txspeed command DR-149
- type 20 packets
- IPX
- broadcasts P2R-276
- IPX, broadcasts P2R-377, P2R-378, P2R-379
- type command FR-701
- UDP
- common services BR-200, BR-205, FR-720
- port numbers FR-720
- IPTalk P2R-61
- port prioritizing FR-721
- unbind-action command BR-803
- undelete command FR-232
- underscore character in regular expressions DR-824
- Ungermann-Bass Net/One
- See Net/One
- UNI
- version
- (example) WR-50
- configuring WR-50
- unicast addresses
- ATM WR-47
- UNIX
- compress command FR-247
- Syslog Server
- message logging to FR-765
- uncompress command FR-247
- User Datagram Protocol
- See UDP
- user-defined-1 command
- APPN link station BR-684
- APPN port BR-685
- user-defined-2 command
- APPN link station BR-686
- APPN port BR-687
- user-defined-3 command
- APPN link station BR-688
- APPN port BR-689
- username, authentication DR-531
- username command DR-531, SR-250
- V.120
- answer all calls, static configuration DR-559
- dynamic detection and setting DR-558
- V.120, automatic detection DR-208, DR-262
- V.25bis
- DDR Options (table) DR-596, DR-623
- options DR-596, DR-623
- validate-update-source command P1R-224, P1R-247
- variance command P1R-336
- VC
- maximum (example) WR-28
- maximum, configuring WR-28
- V character
- copy command output FR-189
- vc-per-vp
- (example) WR-53
- vdlc command BR-690
- verify-adjacent-node-type command BR-692
- verify bootflash command FR-172
- verify command FR-170
- verify-data command FR-703
- verify flash command FR-174
- version command P1R-225
- views, predefined
- described in RFC 1447 FR-694
- VINES
- access control P3R-56 to P3R-58
- access lists
- displaying P3R-26
- extended, creating P3R-53
- interface, applying to P3R-52
- simple, creating P3R-56
- standard, creating P3R-58
- addresses P3R-63, P3R-65
- application layer support, displaying P3R-42
- ARP packets, processing P3R-61
- bandwidth, determining P3R-69
- Banyan distributed naming system P3R-65
- broadcasts
- encapsulation P3R-64
- forwarding P3R-75
- serverless networks P3R-83
- zero-hop P3R-83
- class field P3R-75
- encapsulation P3R-64
- fast switching
- cache entries, deleting P3R-20
- cache entries, displaying P3R-27
- configuring P3R-79
- filters
- access lists
- extended P3R-54
- simple P3R-56
- standard P3R-59
- input network P3R-67
- input router P3R-68
- interface, applying to P3R-52
- output network P3R-74
- floating static routes P3R-77
- hello messages P3R-93
- hop count field P3R-75
- host names
- addresses, assigning P3R-65
- entries, displaying P3R-29
- interfaces, displaying status of P3R-30
- IPC connections
- blocks, deleting P3R-21
- displaying information P3R-33
- port numbers (table) P3R-55, P3R-60
- IP header P3R-75
- load sharing P3R-79
- metrics
- interface, specifying on P3R-69
- routing, determining P3R-77
- neighbor table
- deleting P3R-22
- displaying P3R-35
- static paths, creating P3R-72
- network connectivity, testing P3R-25
- NIST clock P3R-91
- NTP P3R-90, P3R-91
- packet's path, determining P3R-50
- protocol names P3R-53, P3R-58
- router network address, redetermining P3R-81
- routing
- enabling P3R-81
- on serverless networks P3R-83
- routing table
- deleting P3R-23
- displaying P3R-39
- routing updates P3R-85
- filtering P3R-67, P3R-68, P3R-74
- frequency P3R-95
- propagation P3R-93
- redirect messages P3R-76
- split horizon P3R-85
- RTP
- enabling P3R-86
- messages, redirecting P3R-76
- serverless networks P3R-61
- SMDS, configuring over WR-207
- split horizon P3R-85
- SRTP, enabling P3R-86
- static paths P3R-72
- static routes P3R-77
- StreetTalk P3R-65
- time
- accepting updates P3R-56
- sending updates P3R-89
- synchronizing with network time P3R-90
- synchronizing with router P3R-91
- updates
- accepting P3R-87
- sending P3R-88
- TraceRoute function P3R-50
- traffic statistics
- deleting P3R-24
- displaying P3R-45
- vines access-group command P3R-52
- vines access-list command P3R-53, P3R-56, P3R-58
- vines arp-enable command P3R-61
- vines decimal command P3R-63
- vines encapsulation command P3R-64
- vines host command P3R-65
- vines input-network-filter command P3R-67, P3R-74
- vines input-router-filter command P3R-68
- vines metric command P3R-69
- vines neighbor command P3R-72
- vines propagate command P3R-75
- vines redirect command P3R-76
- vines route-cache command P3R-79
- vines route command P3R-77
- vines routing command P3R-81
- vines serverless command P3R-83
- vines split-horizon command P3R-85
- vines srtp-enabled command P3R-86
- vines time access-group command P3R-87
- vines time destination command P3R-88
- vines time participate command P3R-89
- vines time set-system command P3R-90
- vines time use-system command P3R-91
- vines update deltas command P3R-93
- vines update interval command P3R-95
- VIP distributed switching
- See switching
- virtual access interfaces
- VTY line on which created, identifying DR-420
- virtual asynchronous lines
- configuring authentication DR-430, DR-440, DR-449
- virtual circuit
- See VC
- virtual circuit descriptor
- See VC
- virtual circuits
- X.25
- displaying address map WR-248
- facility handling WR-335
- See also PVC; X.25
- virtual data link control
- APPN
- port, defining BR-566
- ring group, specifying BR-690
- virtual MAC address option, specifying BR-690
- SNA Service Point configuration (example) BR-527
- virtual interfaces
- Token Ring
- creating BR-544
- virtual interface template
- translate lat command, using with DR-434
- translate tcp command, using with DR-444
- translate x25 command, using with DR-455
- virtual LANs, monitoring
- See VLANs
- Virtual Network System
- See VINES
- virtual private dialup networking
- authenticating tunnel
- local name, specifying DR-755
- remote host name and IP address DR-757
- displaying information DR-749
- enabling DR-753
- home gateway, CHAP challenge, issuing DR-754
- incoming connections DR-755
- outgoing connections DR-757
- virtual template to use DR-755
- virtual-profile aaa command DR-689
- virtual profiles DR-687 to DR-690
- virtual-profile virtual-template command DR-690
- virtual ring
- assigning BR-193, BR-195
- definition BR-183, BR-449
- virtual template
- configuration example DR-502
- configured as serial interface DR-675, DR-688
- multilink bundle interface, defining DR-502
- purpose DR-675, DR-688
- virtual terminal lines DR-22
- configuring DR-22
- See also VTY lines
- VLANs
- monitoring BR-80
- VPDN
- tunnel authorization, search order DR-759
- vpdn enable command DR-753
- vpdn incoming command DR-755
- vpdn outcoming command DR-757
- vpdn search-order command DR-759
- vrn command BR-804
- vty-async command DR-457
- vty-async dynamic-routing command DR-459
- vty-async header-compression command DR-460
- vty-async ipx ppp-client loopback command DR-461
- vty-async keepalive command DR-462
- vty-async mtu command DR-463
- vty-async ppp authentication command DR-464
- vty-async ppp use-tacacs command DR-465
- vty-async virtual-template command DR-466
- VTY lines
- assigned to loopback interfaces DR-431, DR-440, DR-449
- See also virtual terminal lines
- watchdog packets P2R-384
- spoofing P2R-368
- weighted fair queuing
- See fair queuing
- where command DR-407, DR-482
- which-route command P3R-341
- whiteboard applications P1R-628
- wildcard command BR-693
- word help
- description FR-13
- write erase command
- See erase startup-config command
- write memory command
- See copy running-config command
- write network command
- See copy running-config command
- write terminal command
- See show running-config command
- X.121 address
- DDN, caution not to change WR-225
- Frame Relay SVC WR-167
- numbers, codes and values WR-168
- setting WR-262
- suppressing
- called address WR-316
- calling address WR-317
- use source WR-327
- X.25
- accept reverse charges WR-261
- addresses
- called, suppressing WR-316
- calling
- suppressing WR-317
- updating WR-327
- interface, setting on WR-262
- protocol-to-remote host mapping WR-282
- BFE
- encapsulation WR-224
- remote-red setting WR-306
- Blacker Emergency Mode WR-264, WR-265
- bridging on WR-215, WR-287
- compressed packet header WR-289
- configuring ISDN
- static TEI DR-769
- CUD, interpreting calls with unknown WR-266
- DCE device WR-224
- DDN encapsulation WR-224
- default protocol, setting WR-266
- directed broadcasts, configuring BR-83, BR-453, WR-285
- DTE device WR-224
- encapsulation
- BFE devices WR-225
- DDN WR-225
- methods supported BR-83, BR-453, WR-284
- facilities supported BR-453, WR-284
- facility handling WR-335
- frames, bridging packets in BR-82
- hold timer, setting WR-272
- hosts, limiting access DR-469, WR-330
- input packet size
- maximum, setting WR-277, WR-285
- PVC
- encapsulation maximum WR-297
- switched maximum WR-300, WR-302
- tunnel maximum WR-305
- window WR-328
- input packet size, setting with x25 map command BR-83, BR-453
- interface statistics, displaying WR-242
- Interrupt packet DR-814
- ISDN over D channel DR-768
- isdn x25 static-tei command DR-769
- maintaining WR-218
- map options (table) BR-453, WR-284
- multiprotocol virtual circuits WR-282
- network user ID BR-84, BR-454, WR-285
- OSPF BR-83, BR-453, WR-285
- output packet size BR-83, BR-453
- maximum, setting WR-285
- PVC
- encapsulation maximum WR-297
- switched maximum WR-300, WR-302
- tunnel maximum WR-305
- output window size WR-297, WR-329
- packet acknowledgment policy WR-328, WR-329
- packet-by-packet compression BR-83, BR-453, WR-284
- packet hold queue WR-271
- packet-level restarts, forcing WR-279
- pad connections, viewing DR-480
- PAD link WR-291
- precedence handling WR-276
- protocols supported
- routing WR-215
- table WR-283
- protocols supported (table) WR-297
- protocol translation options DR-429, DR-439
- PVC
- displaying address map WR-248
- options (table) WR-297
- states WR-259
- switched options (table) WR-300, WR-302
- tunnel options (table) WR-305
- Recognized Operating Agencies lists
- See X.25, ROA
- restarting WR-218
- ROA
- name and number WR-315
- ROA lists BR-84
- routing
- local switching WR-314
- remote switching WR-314
- supported protocols WR-215
- routing table WR-307
- creating WR-307
- displaying WR-251
- split horizon P3R-225
- static host name map, defining DR-468, WR-273
- subaddress, configuring BR-695
- TEI restrictions DR-769
- traffic over ISDN D channel
- (example) DR-767
- translation options DR-454
- tunneling WR-314
- user facilities
- accept reverse charging BR-83, BR-453, WR-261, WR-284
- closed user group BR-83, BR-453, WR-267, WR-285
- flow control parameter negotiation WR-267
- network user ID BR-84, BR-454, WR-285
- reverse charging BR-83, BR-453, WR-267, WR-284
- ROA list name, specifying BR-84, BR-454
- ROA per-call basis WR-268
- ROA X.25 map options WR-285
- throughput class negotiation BR-84, BR-454, WR-267, WR-285
- transit delay BR-84, BR-454, WR-268, WR-285
- virtual circuits
- clearing WR-275
- displaying address map WR-248
- setting number of BR-83, BR-453, WR-285, WR-293
- window modulus WR-292, WR-328, WR-329
- window size BR-83, BR-453, WR-285
- PVC option WR-300
- PVC tunnel option WR-305
- X.29
- access list, applying to a line WR-216
- Indication of Break packet DR-814
- PAD profile script, creating WR-331
- X.25 hosts, limiting access DR-469, WR-330
- X.29 SET PARAMETER packet DR-476, DR-483
- X.3
- parameter settings, viewing DR-480
- X.3 PAD
- description DR-483
- making connections DR-483
- parameters
- changing dynamically DR-474
- default values DR-476, DR-483
- description DR-474 to DR-476
- setting DR-483
- X.3 PAD parameters
- action upon receipt of Break signal (7) DR-813
- baud rate (11) DR-814
- character delete (16) DR-816
- data forward character (3) DR-812
- description of DR-811
- device control (5) DR-813
- discard output (8) DR-814
- echo mask (20) DR-817
- editing (15) DR-816
- edit PAD service signals (19) DR-817
- escape from data transfer (1) DR-812
- idle timer (4) DR-813
- input flow control (12) DR-815
- line delete (17) DR-816
- line display (18) DR-816
- Line Feed insertion (13) DR-815
- Line Feed padding (14) DR-815
- line folding (10) DR-814
- local echo mode (2) DR-812
- local editing (15) DR-816
- PAD service signals (6) DR-813
- page wait (22) DR-817
- parity treatment (21) DR-817
- return padding (9) DR-814
- X.28 mode DR-486
- x25 accept-reverse command WR-261
- x25 address command WR-262
- x25 alias command WR-263
- x25 bfe-decision command WR-264
- x25 bfe-emergency command WR-265
- x25 default command WR-266
- x25-dest-address command BR-694
- x25 facility command WR-267
- x25 hic command WR-269
- x25 hoc command WR-270
- x25 hold-queue command WR-271
- x25 hold-vc-timer command WR-272
- x25 host command DR-468, WR-273
- x25 htc command WR-274
- x25 idle command WR-275
- x25 ip-precedence command WR-276
- x25 ips command WR-277
- x25 lic command WR-278
- x25 linkrestart command WR-279
- x25 loc command WR-280
- x25 ltc command WR-281
- x25 map bridge command BR-82, WR-287, WR-291
- x25 map command WR-282, WR-283
- x25 map compressedtcp command WR-289
- x25 map pad command WR-291
- x25 map qllc command BR-452
- x25 modulo command WR-292
- x25 nvc command WR-293
- x25 ops command WR-294
- x25 pad-access command WR-295
- x25 pvc command
- encapsulating WR-296
- switched WR-299
- tunnel WR-304
- x25 pvc command (switched PVC to SVC) WR-301
- x25 pvc qllc command BR-455
- x25 remote-red command WR-306
- x25 roa command WR-315
- x25 route command WR-307
- regular expressions DR-820
- (example) DR-825
- x25 routing command WR-314
- x25 subaddress command DR-485
- x25-subaddress command BR-695
- x25 suppress-called-address command WR-316
- x25 suppress-calling-address command WR-317
- x25 t10 command WR-318
- x25 t11 command WR-319
- x25 t12 command WR-320
- x25 t13 command WR-321
- x25 t20 command WR-322
- x25 t21 command WR-323
- x25 t22 command WR-324
- x25 t23 command WR-325
- x25 th command WR-326
- x25 use-source-address command WR-327
- x25 win command WR-328
- x25 wout command WR-329
- x28 command DR-486
- x29 access-list command DR-469, WR-330
- x29 profile command DR-470, WR-331
- x3 command DR-483
- X Display Manager Control Protocol
- See XDMCP
- XDMCP, starting XRemote DR-416
- Xerox Network Systems
- See XNS
- XID
- frames
- frequency of transmission, controlling BR-376
- value for the SDLC station, specifying BR-405
- specifying for the SDLC station BR-433
- xid-block-number command BR-696
- xid-id-number command BR-697
- xmodem command FR-176
- XNS
- 3Com 3+ hosts P3R-363
- access control
- extended P3R-346
- standard P3R-349
- access lists, creating
- extended P3R-346
- standard P3R-349
- broadcasts
- all-nets P3R-364
- flooding P3R-364, P3R-365, P3R-366
- flooding in 3Com environment P3R-365
- forwarding P3R-367, P3R-370
- encapsulation on Token Ring P3R-363
- fast switching P3R-377
- cache, displaying entries in P3R-355
- filters
- enabling P3R-378
- generic, enabling P3R-362
- filters, routing table
- accepting packets P3R-378
- adding networks P3R-372
- updates P3R-375
- helpering, configuring P3R-367, P3R-370
- IDP P2R-205
- interfaces, displaying status P3R-356
- load sharing P3R-373
- metrics, routing P3R-345, P3R-380
- Net/One routing, enabling P3R-368, P3R-380
- network connectivity, testing P3R-351, P3R-353
- network masks P3R-346
- parallel paths, choosing between P3R-373
- paths, setting maximum P3R-373
- RIP
- enabling P3R-379
- updates
- advertising P3R-375
- receiving P3R-368
- setting timers P3R-382
- routes
- delay metrics P3R-368, P3R-380
- learning P3R-368
- routing table
- adding entries P3R-372
- displaying entries P3R-358
- updating P3R-382
- SMDS, configuring over WR-207
- standard routing, enabling P3R-374, P3R-379
- static routes, adding to routing table P3R-376
- Token Ring encapsulation P3R-363
- traffic statistics, displaying P3R-360
- xns access-group command P3R-362
- xns encapsulation command P3R-363
- xns flood broadcast allnets command P3R-364
- xns flood broadcast net-zero command P3R-365
- xns flood specific allnets command P3R-366
- xns forward-protocol command P3R-367
- xns hear-rip command P3R-368, P3R-380
- xns helper-address command P3R-370
- xns input-network-filter command P3R-372
- xns maximum-paths command P3R-373
- xns network command P3R-374
- xns output-network-filter command P3R-375
- xns route-cache command P3R-377
- xns route command P3R-376
- xns router-filter command P3R-378
- xns routing command P3R-379
- xns ub-emulation command P3R-380
- xns update-time command P3R-382
- XOT
- clearing/terminating WR-220
- VCs, displaying information WR-260
- XRemote
- automatic session startup DR-412 to DR-416
- buffer size, changing DR-413
- connecting to host computer DR-408
- connections, displaying DR-376
- connections to servers DR-408
- description DR-287, DR-408, DR-412, DR-416
- font servers, identifying DR-414
- manual session startup DR-408
- reenabling manually DR-408
- returning to EXEC prompt DR-408
- sessions between servers DR-410
- setting X display location DR-408
- starting clients DR-408
- terminal line statistics, displaying DR-376
- terminating the session DR-408
- xremote command DR-408
- xremote lat command DR-412
- XRemote terminal
- configuring DR-409
- xremote tftp buffersize command DR-413
- xremote tftp host command DR-414
- xremote tftp retries command DR-415
- xremote xdm command DR-416
- X Window System, setting display location DR-408
- ZIP
- query interval P2R-97
- reply filter, creating P2R-98
- Zone Information Protocol
- See ZIP
- zones
- NBP P2R-8
- See also AppleTalk, zone
Copyright 1989-1997
©
Cisco Systems Inc.
