![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The HP 10BaseT Hub-16M has 16 10BaseT ports and one AUI port. One of the 10BaseT ports can be configured as either an MDI or MDI-X port through a user-selectable switch on the front panel.
The HP 10BaseT Hub-16M has built-in SNMP management, hub level and port level security, and support for Cisco Discovery Protocol (CDP) and StackMaker MIB. The hub can be monitored and managed graphically using CiscoWorks Windows, or via Telnet and out-of-band console. The HP 10BaseT Hub-16M also supports the optional external Cisco Redundant Power System (RPS).
Table 8-31 lists a summary of features for the HP 10BaseT Hub-16M, and Table 8-32 lists the environmental specifications.
Characteristic | Description |
---|---|
Configuration guidelines | Maximum UTP cable distance between one HP 10BaseT Hub-16M hub and one end station: 328 ft (100m)
Maximum UTP cable distance between any two HP 10Base-T Hub-16M hubs: 328 ft (100m) Maximum number of HP 10BaseT Hub-16M hops in a data path over UTP cabling: 4 Maximum number of HP 10BaseT Hub-16M hubs in a common thin Ethernet segment: 30 MDI/MDI-X switch on front panel to configure port 16 for use with straight-through cable |
Cabling requirements | Standard RJ-45 connectors for 16 ports; AUI connector for port 17
Two-pair Category 3, 4, or 5 UTP wiring (RJ-45) |
Management | SNMP management information base (MIB) II, SNMP MIB extensions, repeater MIB, Cisco IOS software, and HP management extensions
CiscoWorks Windows and other SNMP management systems Telnet and terminal-based out-of-band management console IP assignment via bootstrap protocol (BOOTP) |
Indicators | Per-port LEDs for link integrity, receive activity, and enabled/ disabled status
Per-hub LEDs indicate power, redundant power system (RPS), activity, collision, security, and fault status |
Redundancy | Supports connection to the optional Cisco Redundant Power System
Compatible with IEEE 802.3 standard for interoperability with other 10BaseT products |
Dimensions (H x W x D) | 1.7 x 16.8 x 9.4 in. (4.36 x 42.5 x 23.8 cm) |
Weight | 8 lbs 7 oz (7.43 kg) |
Agency approvals | IEC 950: (1991)+A1,A2/ EN 60950 (1992)+A1, A2, CSA950, NOM-019-SCFI-1994, UL1950 |
Electromagnetic emissions certifications | FCC part 15 Class A, ISO/IEC Guide 22, EN 55022 Class A / CISPR-22 Class A, VCCI level 1, Canadian EMC Class A, Australia/ New Zealand Class A |
Description | Specification |
---|---|
Power consumption | Maximum current 0.3A |
Input voltage | 100 to 240 VAC1, 50 to 60 Hz |
Operating temperature | 23 to 113×F (-5 to 45×C) |
Operating relative humidity | 10 to 95% noncondensing at 104×F (40×C) |
Operating altitude | 9,843 ft (3,000 m) |
The HP 10BaseT Hub-16M supports the following standard features:
The HP 10BaseT Hub-16M can function in a variety of applications as follows:
Table 8-33 provides the product number for the HP 10BaseT Hub-16M.
Description | Product Number |
---|---|
16-port 10BaseT SNMP-managed hub | Cisco1516M |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |