![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
The uBR7246 Universal Broadband Router is two products in one chassis. The Universal Chassis contains the Broadband Subsystem and the Router Subsystem, which are described in detail below.
The Cisco Universal Broadband Router uBR7246 combines the functionality of the industry leading Cisco 7200 router and a head-end cable modem in one integrated platform. The uBR7246provides cable operators with a cost-effective, scalable, and feature-rich interface between subscriber cable modems and the backbone data network. The modular architecture of the uBR7246 maximizes cable operators' investment by enabling them to support multiple network services in one platform and avoid head-end product obsolescence as subscriber modem products and technologies evolve. Cable operators have the ability to deploy a variety of services to customers, including internet access and multimedia applications, while maximizing the efficiency of their network bandwidth utilization, which in turn allows cable operators to derive higher profits from the same scarce network resources.
The uBR7246 Universal Chassis:
Universal Chassis Physical Configuration | |
Modem Card Slots | 4 |
Port Adaptor Slots | 2 |
Universal Chassis Dimensions and Weight Specifications | |
Height | 10.5in (26.68cm) |
Width | 17.0in (43.18cm) |
Depth | 22.0 in (55.88cm) |
Weight (max) | 104 lb (47.22 kg) |
Weight (Installation/Minimum) | 43 lb (19.55 kg) |
Universal Chassis Power Requirements | |
Input, VA | 840W max |
Output, Watts | 550W max |
Heat Dissipation | 840W (1262 Btu/hr) |
AC Input Voltage | 100-240 VAC |
Frequency | 50-60 Hz |
AC Input Current | 7.0A max @ 110 VAC
3.5A max @ 240 VAC |
AC-input cable | 18 AWG three-wire cable, with a three-lead IEC-320 receptacle on the power supply end, and a country-dependent plug on the power source end |
DC Input Voltage | -38 VDC min
-48 VDC nominal -72 VDC max |
DC Input Current | 20A max @ -48VDC |
DC Voltages | +3.5V @ 31A supplied
+5.2V @ 44A +12.2V @ 1.0A -12.2V @ 1.5A +16V @ 4A -16V @ 0.5A |
Operating Temperature | 32 to 104 °F
(0 to 40 °C) |
Nonoperating Temperature | -4 to 149 °F
(-20 to 65 °C) |
Relative Humidity | 10 to 90% noncondensing
~120 cfm |
The Cisco uBR7246 conforms to the following set of safety and regulatory standards:
Safety |
UL 1950 |
CSA 22.2-No. 950 |
EN60950 |
EN41003 |
AUSTEL TS001 |
AS/NZS 3260 |
EMI |
AS/NRZ 3548 Class A |
CSA Class A |
FCC Class A |
EN60555-2 |
EN55022 Class B |
VCCI (Class II) |
Immunity |
IEC-1000-4-2 (ESD) |
IEC-1000-4-3 (radiated susceptibility) |
IEC-1000-4-4 (electrical fast transients) |
IEC-1000-4-5 (surge) |
IEC-1000-4-6 (injected RF swept) |
IEC-1000-4-11 (power line voltage) |
IEC 1000-3-2 (harmonics) |
The uBR Broadband cable subsystem consists of up to 4 modem cards which plug in to the Universal chassis. Each modem card is entirely independent from a radio frequency (RF) standpoint, while all modem cards in the chassis share the Router subsystem. This provides maximum cost-effectiveness and flexibility to the cable operator by amortizing the cost of the routing across all the modems in each chassis, while allowing each of four modem cards to serve a dedicated group of subscriber modems. This flexibility further enables the use of different types of subscriber devices if desired.
Modem Card Types Cisco will ultimately offer a wide variety of modem cards, depending on the types of subscriber modems that are needed. The modem cards Cisco offers are all fully compliant with the MCNS DOCSIS specification.
MC-11: 1 Downstream and 1 Upstream The MC-11 Modem Card contains one 64-QAM downstream modulator and one QPSK upstream demodulator on a single card. The MC-11 modem supports both two-way and telephone-return modems simultaneously. The MC-11 offers cable operators the lowest capital cost for an initial entry point into a market, and is therefore ideal for smaller cable systems or nodal areas with low penetration of cable data service.
MC-14: 1 Downstream and 4 Upstream The MC-11 Modem Card contains one 64-QAM downstream modulator and four QPSK upstream demodulators on a single card. The MC-14 Modem supports both two-way and telephone-return modems simultaneously. The MC-14 provides a very favorable overall cost per subscriber modem, and is well suited for deployment in medium to large cable systems with good penetration of cable data service.
MC-26: 2 Downstream and 6 Upstream The MC-26 Modem Card contains two 64-QAM downstream modulators and six QPSK upstream demodulators on a single card. The MC-26 supports both two-way and telephone-return modems simultaneously. The MC-26 provides the most cost-effective solution on the market on a per-subscriber basis, and is designed to be the workhorse product for medium to large cable systems as their cable data service grows beyond the initial rollout to full-scale market deployment.
The uBR7246 Broadband Subsystem:
Modem Card Physical Configuration | |
Modem Cards/chassis | 4 |
Height | 1.35 in (3.43 cm) |
Width | 13.50 in (34.29 cm) |
Depth | 10.56 in (26.82 cm) |
Modem Card RF Specifications | |
Downstream Modulation | 64 QAM |
Downstream Bit Rate | 27 Mbps (effective) |
Upstream Modulation | QPSK |
Upstream Bit Rate | 2.048 Mbps (effective) |
Output Frequency | 44 MHz |
Modem Card Power Requirements | |
Heat dissipation | 30W |
AC-input voltage | 120-240 VAC wide input with power factor correction |
AC-input current rating | 0.25A maximum at 120 VAC
0.125A maximum at 240 VAC |
AC-input cable | Three-wire cable, with a three-lead receptacle on the power supply end, and a country-dependent plug on the power source end |
Frequency | 50/60 Hz |
Modem Card Software Requirements | |
Cisco IOS Release 11.3(3)T, or later, running on the Cisco uBR7246 Universal Broadband Router, installed at the cable headend |
Operating Temperature | 23 to 113°F
(-5 to 45°C) |
Non-operating Temperature | -13 to 95°F
(-25 to 70°C) |
Relative Humidity | 5 to 95% noncondensing |
Noise level | 38 dBa maximum at desktop
43 dBa maximum in an office |
The Cisco uBR7246 Broadband subsystem conforms to the following set of safety and regulatory standards:
Safety |
UL 1950 |
CSA 22.2-No. 950 |
EN60950 |
AUSTEL TS001 |
AS/NZS 3260 |
Immunity |
IEC 1000-3-2 (harmonics) |
The Router subsystem of the uBR7246 is built on the Cisco 7200 platform. The Cisco 7200 provides high-performance, density, and availability with industry-leading serviceability and manageability features. Cable operators can now gain the advantages of high-performance network- layer switching and services, including security, quality of service, and traffic management.
The Cisco uBR7246 series delivers the full suite of Cisco Internetwork Operating System (IOS) software services, which are capable of managing access to network resources, allocating quality of service among applications, and providing value-added functions such as NetFlow switching The Cisco uBR7246 sets new standards in price/performance, meeting requirements for high-throughput at an affordable price.
With a 150-MHz RISC processor and SRAM, the Cisco uBR7246 provides over 600 Mbps of bandwidth capacity and switching performance at 100,000 packets per second (pps). NetFlow switching, Cisco IOS switching mechanism, allows the Cisco uBR7246 to combine high- performance network-layer switching with the connection-oriented-application of network services, such as security, quality of service, and traffic management. It also enables detailed traffic statistics by protocol and IP address.
The Cisco uBR7246 uses the same port adapters as the Cisco 7200 series and the 7500-Versatile Interface Processor (VIP), thus protecting customer investment in interfaces and simplifying sparing.
The uBR7246 Router Subsystem:
Router Physical Configuration | |
System Processor | NPE-150 |
Processor Type | MIPS R4700
150 MHz CPU with 1MB static RAM |
Bandwidth | 600 Mbps |
Router Network Interfaces | |
Port Adaptor Slots | 2 |
Port Adaptor Types (supported at FCS) | Ethernet (10BaseT)
Fast Ethernet (TX) Fast Ethernet (FX) ATM-OC3 HSSI
|
Cisco 7000 Family Software Subsets and Options | |
Software requirement: | Cisco IOS Release 11.3(3)T or later |
Router Software Feature Licenses | |
Category | Software Feature Licenses |
WAN Packet Protocols | X.25, X.25 Switching, Frame Relay, SMDS, Frame Relay Switching, ATM DXI, SMDS over ATM |
Interdomain Routing | BGP, EGP for Internet scale routing |
NetFlow | NetFlow Switching and NetFlow Data Export |
Network Address Translation | Network Address Translation |
Documentation | Description |
---|---|
DOC-uBR7246-ICG= Cisco uBR7246 Universal Broadband Router Installation and Configuration Guide | A comprehensive guide that describes how to install, configure, and maintain the Cisco uBR7246. |
Description | Product ID |
Cisco uBR7200 Series Products | |
Universal Broadband Router 7246, 6 slots, 4 MC slots, 2 PA slots
(chassis, midplane, rack mount kit and cable management bracket) | uBR7246 |
Cisco uBR7200 Series Processors | |
Cisco 7200 Series Network Processing Engine | NPE-150 |
Cisco uBR7200 Series Input/Output Controllers | |
Cisco 7200 Input/Output | C7200-I/O |
Cisco 7200 Fast Ethernet Input/Output | C7200-I/O-FE-MII |
Cisco uBR7200 Series Modem Cards | |
uBR7200 Modem Card, 1 downstream, 1 upstream, Option | uBR-MC11 |
uBR7200 Modem Card, 1 downstream, 1 upstream, Spare | uBR-MC11= |
uBR7200 Modem Card, 1 downstream, 4 upstream, Option | uBR-MC14 |
uBR7200 Modem Card, 1 downstream, 4 upstream, Spare | uBR-MC14= |
uBR7200 Modem Card, 2 downstream, 6 upstream, Option | uBR-MC26 |
uBR7200 Modem Card, 2 downstream, 6 upstream, Spare | uBR-MC26= |
Cisco uBR7200 Memory Options | |
Cisco 7200 I/O PCMCIA Flash memory, 8M Option | MEM-I/O-FLC8M |
Cisco 7200 I/O PCMCIA Flash memory, 8M Spare | MEM-I/O-FLC8M= |
Cisco 7200 I/O PCMCIA Flash memory, 16M Option | MEM-I/O-FLC16M |
Cisco 7200 I/O PCMCIA Flash memory, 16M Spare | MEM-I/O-FLC16M= |
Cisco 7200 I/O PCMCIA Flash memory, 20M Option | MEM-I/O-FLC20M |
Cisco 7200 I/O PCMCIA Flash memory, 20M Spare | MEM-I/O-FLC20M= |
Cisco 7200 NPE 8MB DRAM Upgrade Kit | MEM-NPE-8MB= |
Cisco 7200 NPE 16MB DRAM Upgrade Kit | MEM-NPE-16MB= |
Cisco 7200 NPE 32MB DRAM (Default) | MEM-NPE-32MB |
Cisco 7200 NPE 32MB DRAM Upgrade Kit | MEM-NPE-32MB= |
Cisco 7200 NPE 64MB DRAM Upgrade Kit | MEM-NPE-64MB |
Cisco 7200 NPE 64MB DRAM Upgrade Kit, Spare | MEM-NPE-64MB= |
Cisco 7200 NPE 128MB DRAM Upgrade Kit | MEM-NPE-128MB |
Cisco 7200 NPE 128MB DRAM Upgrade Kit, Spare | MEM-NPE-128MB= |
Cisco uBR7200 Port and Service Adaptors | |
Port Adapter: 1-port FE, Tx | PA-FE-TX |
Port Adapter: 1-port FE, Fx | PA-FE-FX |
Port adapter: 4-port ethernet | PA-4E |
Port adapter: 8-port ethernet | PA-8E |
Port Adapter: 1-port HSSI | PA-H |
1 port ATM OC3 Multimode | PA-A1-OC3MM |
1 port ATM OC3 Single Mode Intermediate Reach | PA-A1-OC3SM |
Cisco uBR7200 Series Cables | |
V.35 Cable, DTE, Male, 10 Feet | CAB-V35MT |
V.35 Cable, DCE, Female, 10 Feet | CAB-V35FC |
RS-232 Cable, DTE, Male, 10 Feet | CAB-232MT |
RS-232 Cable, DCE, Female, 10 Feet | CAB-232FC |
RS-449 Cable, DTE, Male, 10 Feet | CAB-449MT |
RS-449 Cable, DCE, Female, 10 Feet | CAB-449FC |
X.21 Cable, DTE, Male, 10 Feet | CAB-X21MC |
X.21 Cable, DCE, Female, 10 Feet | CAB-X21FC |
RS-530 Cable, DTE, Male, 10 Feet | CAB-530MT |
8 Lead Octal Cable and 8 Male V35 DTE Connectors | CAB-OCT-V35-MT |
8 Lead Octal Cable and 8 Female V35 DCE Connectors-6 Feet | CAB-OCT-V35-FC |
8 Lead Octal Cable and 8 Male RS-232/V.35 DTE Connectors | CAB-OCT-232-MT |
8 Lead Octal Cable and 8 Female RS-232/V.24 DCE Connectors | CAB-OCT-232-FC |
8 Lead Octal Cable and 8 Male X21 DTE Connectors | CAB-OCT-X21-MT |
8 Lead Octal Cable and 8 Female X21 DCE Connectors | CAB-OCT-X21-FC |
Cisco uBR7200 Series Power Supplies and Cords | |
uBR7200, AC Power Supply, Option | PWR-uBR7200-AC |
uBR7200, Dual AC Power Supply, Option | PWR-uBR7200/2-AC |
uBR7200, DC Power Supply, Option | PWR-uBR7200-DC |
uBR7200, Dual DC Power Supply, Option | PWR-uBR7200/2-DC |
uBR7200, AC Power Supply, Spare | PWR-uBR7200-AC= |
uBR7200, Dual AC Power Supply, Spare | PWR-uBR7200/2-AC= |
uBR7200, DC Power Supply, Spare | PWR-uBR7200-DC= |
uBR7200, Dual DC Power Supply, Spare | PWR-uBR7200/2-DC= |
AC Power Cord, US | CAB-AC= |
AC Power Cord, Australia | CAB-ACA= |
AC Power Cord, Europe | CAB-ACE= |
CD12 Power Cord, Italy | CAB-ACI= |
AC Power Cord, UK | CAB-ACU= |
Cisco uBR7246 Series Spares and Accessories | |
Universal Broadband Router 7246 Chassis, Spare | CHAS-uBR7246= |
uBR7200 Rack Mount Kit and Cable Management Bracket | ACS-uBR7200-RMK= |
Cisco 7200 Fan Tray Assembly, Spare | MAS-7200FAN= |
uBR7246 Midplane Assembly, Spare | MAS-uBR746MP= |
Cisco 7200 Series Port Adaptor Blank, Spare | MAS-uBR-PABLANK= |
uBR7200 Modem Card Blank, Spare | MAS-uBR-MCBLANK= |
uBR7200 Power Supply Blank, Spare | MAS-uBR-PSBLANK= |
uBR7200 Spare System Packaging Material | PKG-uBR7200= |
Cisco uBR7246 Series Software Options | |
Cisco uBR7246 uBR MCNS Two-Way Feature Set | SF-uBR7246-11.3T |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |