|
|
| Number of Trunks: | 1 |
| Topology: | Depends on application defined by FlashPAK |
| Rate: | 9.6, 19.2, 32, 48, 56, 64, 72, 96, 112, 128 kbps. 256, 384, 512 kbps (FRAM-01 only) |
| Interface: | RS-232C/V.24 default |
| Interface Card-1X: V.11 optional | |
| Interface Card-3X: V.35 optional | |
| Interface Card-4X: RS-449 optional | |
| Interface Card-5X: X.50/X.21 optional | |
| Interface Card-6X: V.36 optional | |
| FRAM-01: V.24 default, V.35, X.21, RS-449 |
| Number of Channels: | FASTPAD: 6 (5 Low Speed and 1 High Speed)
3 channels per FRAM-01 Expansion Module installed MICRO: 1 High Speed, 1 Low Speed |
| Rate: | High Speed = Up to 64 kbps
Low Speed = up to 192. kbps synchronous, 9.6 asynchronous. FRAM-01 Channel = 512 kbps |
| Protocol: | High Speed = Transparent or H/SDLC.
Low Speed = Asynchronous, Transparent or H/SDLC. |
| Interface: | High Speed = RS-232C, V.11/X.21
with Interface Card-1X, V.35 with Interface Card.3X, or RS-449 with Interface Card-4X. Low Speed = RS-232. |
| Number of Channels: | Up to 8; Micro - up to 4 |
| Voice Channels per Card: | 1 |
| Rate: VFC-01 | 8K, 9.6K, 12K, 14.4K or 16 K |
| Rate: VFC-03 | 4.8K, 8K, 9.6K, 12K, 14.4K or 16 K |
| Interface: | Loop, 4-Wire E&M, or 2-Wire E&M |
| Front Panel: | 4 x 20 LCD Display and 6 control buttons |
| NMS/ Command Port: | RS-232 asynchronous |
| Power Consumption: | 40W + 5W per voice/fax expansion module |
| Redundant Power Supply: | RPSMD, optional (not available on Micro) |
| Input Voltage: | 90 to 240 VAC |
| Input Frequency: | 50/60 Hz |
| Rack Mount Kit: | Optional |
| Height: | 5.25" (13.34 cm) |
| Width: | 17" (43.18 cm) |
| Length: | 18" (45.72 cm) |
| Weight: | 30 lbs (13.61 kg) |
| Temperature: | 0-50 Degrees Celsius |
| Humidity: | 10%-90% noncondensing |
| Voice/Fax Modules: | In-Line Voice/Fax Module VFC-01 and VFC-03 |
| Fax Support: | Group III at 2.4, 4.8, 7.2, and 9.6 kbps |
| Number of Channels: | Up to 8; up to 4 on Micro |
| Interface | Loop, 4 wire or 2 wire E&M. |
|
|