|
|
This chapter describes the StrataView Plus database column and row structure for each of the database tables. A description of how to interpret the contents of each field is included.
The database is an Informix SQL database and consists of the following 35 tables.
| Table | Description |
|---|---|
| MAINTLOG | Contains an entry for each network log record |
| SV_SYSTEM | Contains StrataView name and system parameters |
| NETWORK | Contains ID and name of each IPX/BPX network in the database |
| NODE | Contains name and status of each node in each network |
| PACKET_LINE | Contains name, topology, technical details and status of each packet line in each network |
| CIRCUIT_LINE | Contains name, topology, technical details and status of each circuit line in each network |
| FRP | Contains name, topology, technical details and status of each frame relay port in each network |
| USER_CONNECTION | Contains details of each user connection in each network) |
| CONNECTION | Contains details of each connection in each network |
| STAT_ENABLE | Contains details of which and what type of network statistics are to be collected |
| PACKET_LN_DATA | Contains packet line statistic data |
| CIRCUIT_LN_DATA | Contains circuit line statistic data |
| FRP_DATA | Contains frame relay port statistic data |
| CONNECTION_DATA | Contains connection statistic data |
| IP_ADDRESS | Contains IP addresses for an attached AIP device |
| LOGICAL_CONN | Contains details of the network's logical connections |
| ROUTES | Contains network routing information |
| ATM_CONNECTION | Contains ATM connection information |
| ASI_LINE | Contains information about BPX ASI lines |
| ASI_PORT | Contains information about BPX ASI ports |
| FPD_CONNECTION | Contains information about FastPAD connections |
| FTC_PORT | Contains information about FastPAD IPX ports |
| FPD_NODE | Contains information about FastPAD nodes |
| FPD_CONN_DATA | Contains information about FastPAD statistics |
| ASI_LN_DATA | Contains information about ASI line statistics |
| ASI_PORT_DATA | Contains information about BPX ASI port statistics |
| FTC_PORT_DATA | Contains information about FastPAD IPX port statistics |
| BIS_OBJECT | Contains information about BASIS Interface shelf (BIS) object statistics |
| SHELF | Contains information about AXIS Shelves |
| PERIPHERAL | Contains information about AXIS Peripherals |
| CARD | Contains information about AXIS Cards |
| PLCP | Contains information about AXIS PLCPs |
| CESM_CONNECTION | Contains information about AXIS CESM connections |
| AUSM_PORT | Contains information about AXIS AUSM ports |
| DNS_NODE | Contains information about DNS nodes |
Each row in a table may be referenced (accessed) through a unique identifier which is made up of one or more fields in the row. The fields that make up the unique identifier are indicated in bold in each of the table descriptions that follow.
| Data Type (C Format) | Data Type (Informix Format) | Remarks |
|---|---|---|
| int | integer | Signed 32 bit binary integer |
| long | integer | Signed 32 bit binary integer |
| short | smallint | Signed 16 bit binary integer |
| char (n+1) | char (n) | Fixed length character string n bytes in length. In the C format, the length is specified as one byte longer to accommodate the terminating null character that is required in C character strings. When the actual character string is shorter than the specified number of characters, the field is filled out on the right with blanks. |
| date | Signed 32 bit binary integer containing the date expressed as the number of days from (or before) December 31, 1899. January 1, 1900 is day 1. |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
rec_tag
| yes | int | a unique record tag to identify the record |
network
| char (8+1) | SV Plus network name of network generating record | |
node_name
| char (10+1) | IPX node name of node generating record | |
ntime
| int | UNIX timestamp | |
edate
| date | date field in Informix format | |
etime
| char (8+1) | time field in hh:mm:ss format | |
time_zone
| char (4+1) | timezone of the record in ASCII format | |
class
| char (5+1) | class of log record
"major" = major | |
msg
| char (256+1) | detail message of the record | |
ack_flag
| short | event acknowledgment flag | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
name
| yes | char (8+1) | name of the SV Plus parameter |
val
| char (20+1) | character string including revision number of database |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
netw_id
| yes | short | SV Plus network ID |
ipx_netw_id
| short | IPX network ID | |
netw_name
| char (8+1) | SV Plus network name assigned by user | |
active
| short | flag for network active state | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV Plus node ID |
netw_id
| short | IPX network ID | |
node_name
| char (10+1) | IPX node name | |
ipx_netw_id
| short | IPX network ID | |
ipx_node_id
| short | IPX node ID | |
netw_ip_address
| int | network IP address for the node | |
lan_ip_address
| int | LAN IP address for the node In Rel 8.1, both netw_ip_address and lan_ip_address have same value. | |
alarm_state
| short | node alarm state
0 = clear 64 = clear & node is in SV+ mode | |
gateway
| short | flag for node acting as a gateway between two network domains
0 = not a gateway | |
active
| short | node active state flag
0 = inactive * | |
platform
| short | flag for platform type: 0 = IPX, 1 = BPX. 2 = IGX, 3 = AXIS, 4 = INS (DAS) | |
subtype
| short | flag for a shelf
0 = Routing nodf | |
release
| char (11+1) | SV+ software release revision | |
fs_inc_rate
| short | FRP Foresight increase rate | |
fs_dec_rate
| short | FRP Foresight decrease rate | |
fs_fdec_rate
| short | FRP Foresight fast decrease rate | |
rst_timeout
| short | timeout for setting PVC rate to QIR | |
mode
| short | Node mode (for AXIS node) | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
pln_obj_id
| yes | int | packet line object ID |
l_network_id
| short | local SV Plus network ID | |
l_node_id
| yes | int | local SV Plus node ID |
l_line
| short | local logical trunk number | |
1_slot
| short | local trunk slot number | |
l_port
| short | local trunk logical port number | |
l_vtrk
| short | local virtual trunk ID | |
card_type
| short | packet line card type
3 = TXR 35 = FTC | |
interface
| short | packet line interface type
0 = unknown 6 = subrate 7 = Broadband | |
line_load
| int | packet line load in packets per second | |
r_network_id
| remote SV Plus network ID | ||
r_node_id
| int | remote SV Plus node ID | |
r_line
| short | remote line number | |
r_slot
| short | remote trunk logical slot number | |
r_port
| short | remote trunk logical port number | |
r_vtrk
| short | remote virtual trunk ID | |
alarm_state
| short | packet line alarm state
0 = clear | |
comment
| char (20+1) | comment field used to further qualify the packet line | |
active
| short | packet line active state
0 = inactive | |
status
| short | packet line status field
1 = clear | |
stat_reserve
| int | packet line statistical reserve field (in packets per second). | |
b_bq_depth
| int | bursty data B queue depth | |
b_bq_efcn
| int | bursty data B EFCN/ENCI threshold | |
clp_h_thresh
| short | CLP high dropping threshold | |
clp_l_thresh
| short | CLP low dropping threshold | |
time_load
| int | time stamped load units | |
non_time
| int | non-time stamped load units | |
v_load
| int | voice load units | |
bursty_a_load
| int | bursty data A load units | |
bursty_b_load
| int | bursty data B load units | |
bursty_a_cmax
| short | bursty data A Credit Max | |
bursty_b_cmax
| short | bursty data B Credit Max | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
cln_obj_id
| yes | int | circuit line object ID |
l_network_id
| short | local SV Plus network ID | |
l_node_id
| yes | int | local SV Plus node ID |
l_line
| short | local circuit line number | |
card_type
| short | circuit line card type
3 = TXR ASI_T3 = 106 | |
interface
| short | circuit line interface type
0 = unknown | |
comment
| char (20+1) | comment field used to further qualify the circuit line | |
active
| short | circuit line active state
0 = inactive This field is unused. | |
status
| short | circuit line status field
1 = clear | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
frp_obj_id
| yes | int | FRP port object ID |
l_network_id
| short | local SV Plus network ID | |
l_node_id
| yes | int | local SV Plus node ID |
shelf
| int | shelf number | |
l_slot
| short | local slot number | |
l -port
| short | local port number | |
port_speed
| int | port speed in hundreds of bits per second (e.g. 256 kbps displays as 2560) | |
comment
| char (20+1) | comment field used to further qualify the FRP port | |
active
| short | circuit line active state
0 = inactive * * This field is unused. | |
status
| short | FRP line status field
1 = clear 2 = failed | |
port_type
| short | type of port
0 = UNI FRP | |
queue_depth
| int | port queue depth | |
ecn_thresh
| in_ | ECN queue depth | |
de_thresh
| short | DE threshold | |
logical_port
| short | Logical port number used in the MIB (For FRSM Port only) | |
line
| short | Line number associated with this port (For FRSM Port only) | |
timeslot_num
| short | Number of timeslots (For FRSM Port only) | |
timeslot_speed
| short | Timeslot speed (For FRSM Port only)
1- speed = 56k 2- speed = 64k | |
port_bitmap
| int | Port bitmap (For FRSM Port only) | |
port_equ
| short | Port Equeue service ratio (For FRSM Port only ) | |
port_flag
| short | Port flags between frames (For FRSM Port only ) | |
protocol_type
| short | Signalling protocol type (For FRSM Port only )
1--other 2--noSignalling 3--strataLMI 4--annexAUNI 5--annexDUNI 6--annexANNI 7--annexDNNI | |
asyn_upd
| short | Asynchronous Updates (For FRSM Port only) | |
link_timer
| short | t391 Line Integrity Timer (For FRSM Port only) | |
poll_timer
| short | t392 Polling Verification Timer (For FRSM Port only) | |
poll_counter
| short | n391 Full Status Polling Counter (For FRSM Port only) | |
err_thresh
| short | n392 Error Threshold (For FRSM Port only) | |
event_count
| short | n393 Monitored Event Count (For FRSM Port only) | |
xmt_timer
| short | Xmt CLLM Status Timer (For FRSM Port only) | |
rcv_timer
| short | Rcv CLLM Status Timer (For FRSM Port only) | |
cllm_ena
| short | CLLM enable/disable (For FRSM Port only ) | |
signal_state
| int | Port signalling state (For FRSM Port only)
1 = LMI failure | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
l_node_id
| yes | int | local SV Plus node ID |
num_segs
| short | Number of segments | |
termination
| short | Type of local and remote end-points.
Bit(0) - Local end has feeder | |
l_slot
| yes | short | Local slot number |
l_line
| yes | short | Local line number (For AXIS connection only) |
l_port
| yes | short | Local port number |
l_subchnl_1
| yes | short | First local sub-channel number |
l_subchnl_2
| yes | int | Second local sub-channel number |
lr_slot
| yes | short | Local slot number |
lr_line
| yes | short | Local line number (For AXIS connection only) |
lr_port
| yes | short | Local port number |
lr_subchnl_1
| yes | short | First local sub-channel number |
lr_subchnl_2
| yes | int | Second local sub-channel number |
lc_node_id
| yes
| int | Local hub SV+ node id.
(Same as local node id for connections that originate in a hub.) |
lc_slot
| yes
| short | Local hub slot number
(Same as local slot id for connections that originate in a hub.) |
lc_port
| yes
| short | Local hub port number
(Same as local port id for connections that originate in a hub.) |
lc_subchnl_1
| yes
| short | First local hub sub-channel number
(Same as first local sub-channel number for connections that originate in a hub.) |
lc_subchnl_2
| yes | int | Second local hub sub-channel number
(Same as second local sub-channel number for connections that originate in a hub.) |
rc_node_id
| int | Remote hub SV+ node id.
(Same as remote node id for connections that originate in a hub.) | |
rr_slot
| short | Remote hub slot number
(Same as remote slot id for connections that originate in a hub.) | |
rr_port
| short | Remote hub port number
(Same as remote port id for connections that originate in a hub.) | |
rr_subchnl_1
| short | First remote hub sub-channel number
(Same as first remote sub-channel number for connections that originate in a hub.) | |
rr_subchnl_2
| int | Second remote hub sub-channel number
(Same as second remote sub-channel number for connections that originate in a hub.) | |
rc_slot
| short | Remote hub slot number
(Same as remote slot id for connections that originate in a hub.) | |
rc_port
| short | Remote hub port number
(Same as remote port id for connections that originate in a hub.) | |
rc_subchnl_1
| short | First remote hub sub-channel number
(Same as first remote sub-channel number for connections that originate in a hub.) | |
rc_subchnl_2
| int | Second remote hub sub-channel number
(Same as second remote sub-channel number for connections that originate in a hub.) | |
r_node_id
| int | Remote SV+ node id | |
r_slot
| short | Remote slot number | |
r_line
| short | Remote line number | |
r_port
| short | Remote port number | |
r_subchnl_1
| short | First remote sub-channel number | |
r_subchnl_2
| int | Second remote sub-channel number | |
parm_type
| short | A flag to indicate if StrataCom or standard FR parameters are used. | |
state
| short | Clear(1), Fail(2), Down(3), Incomplete(4) | |
proc_state
| short | The processing state (used by data broker). | |
con_type
| short | Connection type (e.g. voice, data, frame relay, etc.) Frame Relay = 5
ATM = 6 | |
sub_type
| short | Connection subtype
ATF = 1 VBR = 2 CBR = 3 unknown = 4 ABR = 5 | |
comment
| char (20+1) | comment field used to further qualify the connection | |
l_endpt_obj_id
| int | Local endpoint object id. | |
lc_endpt_obj_id
| int | Local hub endpoint object id. | |
rc_endpt_obj_id
| int | Remote hub endpoint object id. | |
r_endpt_obj_id
| int | Remote endpoint object id. | |
l_rate_info
| short | Local end combination field of rate info: bit(7) Fast EIA Enabled(1)/Disabled(0) bit(6) DFM Enabled(1)/Disabled(0) bits(5-3) Encoding: undefined(0) 7/8(1) 8/8(2) 8/8l(3) 7/8E(4) bit(2-0) Load Type: undefined(0) voice(1) non-TS(2) TS(3) Bursty Data A(4) Bursty Data B(5) | |
l_mir
| int | Local end minimum guaranteed bandwidth in hundreds of bits per second (e.g. 256 kbps displays as 2560) | |
l_qir
| int | Local end QIR in hundreds of bits per second | |
l_pir
| int | Local end PIR in hundreds of bits per second | |
l_vc_q_depth
| int | Local end VC queue depth in bytes | |
l_vc_q_thresh
| int | Local end VC queue threshold in bytes | |
l_vc_q_de_thresh
| int | Local end VC queue DE threshold in bytes | |
l_eg_q_depth
| int | Local end Egress queue depth in bytes | |
l_eg_q_de_thresh
| int | Local end Egress queue DE threshold in bytes | |
l_eg_q_ecn_thresh
| int | Local end Egress queue ECN threshold in bytes | |
l_de_tag_ena
| int | Local end DE tagging enable/disable | |
l_cmax
| short | Local end maximum threshold for FRP credit manager in packets | |
l_per_util
| short | Local end percent utilization | |
l_con_info_flag
| short | Local end connection information flags bit(7) Foresight Enabled (1) High Priority (1) | |
l_cir
| short | Local end CIR in bits per second | |
l_bc
| int | Local end committed burst in bytes. | |
l_be
| int | Local end excess burst in bytes. | |
l_eg_q_select
| short | egress queue selection | |
l_ibs
| int | Local end initial burst size (IBS) in bytes | |
l_channel_type
| short | Local end channel type (currently used by
connections terminating on FRSM) 1= FR-NetworkInterWorking 2= FR-ServiceInterWorking-Transparent 3= FR-ServiceInterWorking-Translate 4= FR-FUNI | |
l_fecn
| short | Local end forward explicit congestion notification default = 0 | |
l_de_to_clp_map
| short | Local end discard-eligible to CLP mapping default = 0 | |
l_clp_to_de_map
| short | Local end CLP to discard-eligible mapping default = 0 | |
l_efci_q_threshold
| short | Local end EFCI queue threshold | |
l_cbs
| int | Local end committed burst size | |
l_mfs
| int | Local end maximum frame size | |
l_ccdv
| int | Local end CCDV | |
l_clp_hi
| short | Local end CLP high threshold | |
l_clp_lo
| short | Local end CLP low threshold | |
l_fst_rate_up
| short | Local end ForeSight rate up | |
l_fst_rate_dn
| short | Local end ForeSight rate down | |
l_fst_fast_dn
| short | Local end ForeSight fast down | |
l_fst_qir_to
| short | Local end ForeSight QIR time out | |
l_fst_max_adj
| int | Local end ForeSight maximum adjustment | |
l_clp_tagging
| int | Local end CLP tagging | |
l_upc_enable
| int | Local end UPC enable | |
l_rm_enable
| int | Local end RM enable | |
l_u_fgcra
| int | Local end FGCRA | |
l_u_scr_policing
| int | Local end SCR policing | |
l_u_pcr01
| int | Local end PCR 0 + 1 | |
l_u_ccdv01
| int | Local end CCDV 0 + 1 | |
l_u_ccdv0
| int | Local end CCDV 0 | |
l_max_buf_size
| int | Local end maximum buffer size | |
l_cell_loss_period
| int | Local end cell loss period | |
l_cdv_rx_t
| int | Local end CDV received | |
r_rate_info
| short | Remote end combination field of rate info: bit(7) Fast EIA Enabled (1) Enabled (1) | |
r_mir
| int | Remote end minimum guaranteed bandwidth in hundreds of bits per second (e.g. 256 kbps displays as 2560) | |
r_qir
| int | Remote end QIR | |
r_pir
| int | Remote end PIR | |
r_vc_q_depth
| int | Remote end VC queue depth | |
r_vc_q_thresh
| int | Remote end VC queue threshold | |
r_vc_de_thresh
| int | Remote end VC queue DE threshold | |
r_eg_q_depth
| int | Remote end Egress queue depth | |
r_eg_q_de_thresh
| int | Remote end Egress queue DE threshold | |
r_eg_q_ecn_thresh
| int | Remote end Egress queue ECN threshold | |
r_de_tag_ena
| int | Remote end DE tagging enable/disable | |
r_cmax
| short | Remote end maximum threshold for FRP credit manager | |
r_per_util
| short | Remote end percent utilization | |
r_con_info_flag
| short | Remote end connection information flags bit(7) Foresight Enabled(1)/Disabled(0) bit(6) High Priority(1) bit(5-0) unused | |
r_cir
| int | Remote end CIR | |
r_bc
| int | Remote end commited burst
default = 0 | |
r_be
| int | Remote end excess burst
default = 0 | |
r_eg_q_select
| short | egress queue selection | |
r_ibs
| int | Remote end initial burst size | |
r_channel_type
| short | Remote end channel type default = 0 | |
r_fecn
| short | Remote end forward explicit congestion notification default = 0 | |
r_de_to_clp_map
| short | Remote end discard-eligible to CLP mapping default = 0 | |
r_clp_to_de_map
| short | Remote end CLP to discard-eligible mapping default = 0 | |
r_efci_q_threshold
| short | Remote end EFCI queue threshold | |
r_cbs
| int | Remote end committed burst size | |
r_mfs
| int | Remote end maximum frame size | |
r_ccdv
| int | Remote end CCDV | |
r_clp_hi
| short | Remote end CLP high threshold | |
r_clp_lo
| short | Remote end CLP low threshold | |
r_fst_rate_up
| short | Remote end ForeSight rate up | |
r_fst_rate_dn
| short | Remote end ForeSight rate down | |
r_fst_fast_dn
| short | Remote end ForeSight fast down | |
r_fst_qir_to
| short | Remote end ForeSight QIR time out | |
r_fst_max_adj
| int | Remote end ForeSight maximum adjustment | |
r_clp_tagging
| int | Remote end CLP tagging | |
r_upc_enable
| int | Remote end UPC enable | |
r_rm_enable
| int | Remote end RM enable | |
r_u_fgcra
| int | Remote end FGCRA | |
r_u_scr_policing
| int | Remote end SCR policing | |
r_u_pcr01
| int | Remote end PCR 0 + 1 | |
r_u_ccdv01
| int | Remote end CCDV 0 + 1 | |
r_u_ccdv0
| int | Remote end CCDV 0 | |
r_max_buf_size
| int | Remote end maximum buffer size | |
r_cell_loss_period
| int | Remote end cell loss period | |
r_cdv_rx_t
| int | Remote end CDV received | |
cos
| short | Class of Service | |
avoid_trk_type
| short | Trunk types to avoid: None (1) Satellite (2) Terrestrial (3) | |
avoid_zcs
| short | Avoid ZCS trunks True (1) False (2) | |
pref_route
| char (256) | The preferred route through the routing network. | |
snmp_index
| int | The SNMP-Proxy index for user connection. |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
con_obj_id
| yes | int | connection IPX object ID |
lcon_obj_id
| short | Logical Connection Object ID | |
master_flag
| short | Flag that indicates if this end is the master. True (1) False (0) | |
l_network_id
| short | local SV Plus network ID | |
l_node_id
| yes | int | local SV Plus node ID |
shelf
| int | Shelf number | |
termination
| short | Type of local and remote end-points.
Bit(0)--Local end has feeder Voice_Data (0) | |
l_slot
| short | local slot number | |
l_line
| short | local line number (FRSM only) | |
l_channel
| short | local channel number | |
l_dlci
| short | local DLCI number | |
l_vci
| int | local VCI number | |
r_network_id
| short | remote SV Plus network ID | |
r_node_id
| int | remote SV Plus node ID | |
r_slot
| short | remote slot number | |
r_channel
| short | remote channel number | |
r_dlci
| short | remote DLCI number | |
r_vci
| int | remote VCI | |
con_type
| short | connection type
0 = ADPCM voice | |
rate_info
| short | combination rate information.
This field is a 16 bit value of which the lower order 8 bits are interpreted as 4 fields (bit 7, bit 6, bits 3-5, and bits 0-2). The values of the fields are the result of ORing together the following 16 bit values. * 0x08 = Fast EIA Enabled | |
l_load_unit
| short | local maximum number of packets per second allocated to the connection | |
r_load_unit
| short | remote maximum number of packets per second allocated to the connection | |
min_bw
| short | minimum guaranteed bandwidth in bits per second | |
dax_con
| short | DAX connection flag
0 = non DAX | |
txr_card
| short | flag to identify voice connection end point card is TXR card type
0 = non TXR | |
comment
| char (20+1) | comment field used to further qualify the connection | |
active
| short | connection active state
0 = inactive * | |
status
| short | connection status 1 = clear 2 = failed 3 = down | |
qir
| int | quiescent information rate in hundreds of bits per second. | |
pir
| int | peak information rate in hundreds of bits per second. | |
vc_q_depth
| int | vc queue depth in bytes | |
vc_q_thresh
| int | vc queue threshol d in bytes (ingress queue ECN threshold) | |
vc_de_thresh
| int | ingress queue DE threshold | |
eg_q_depth
| int | egress queue depth in bytes | |
eg_q_de_thresh
| int | egress queue DE threshold in bytes | |
eg_q_ecn_thresh
| int | egress queue ECN threshold in bytes | |
de_tag_ena
| int | DE tagging enable/disable | |
cmax
| short | credit max.for a connection in packets | |
per_util
| short | percent utilization | |
conn_info_flag
| short | connection information flag bit(7) Foresight Enabled (1) High Priority (1) | |
cir
| int | committed information rate in bits per second | |
a_bit_status
| short | connection a bit status field
Bit 7 is 1 if NNI a-bit status is OK Bit 6 is 1 if NNI remote PVC does not exist. Bit 5 to Bit 0 unused. | |
ibs
| int | initial burst size | |
bc
| int | burst-committed in bytes
default = 0 | |
be
| int | burst-excess in bytes
default = 0 | |
eg_q_select
| short | egress queue selection | |
efci_q_threshold
| short | EFCI queue threshold | |
cbs
| int | committed burst size | |
mfs
| int | maximum frame size | |
ccdv
| int | CCDV | |
clp_hi
| short | CLP high threshold | |
clp_lo
| short | CLP low threshold | |
fst_rate_up
| short | ForeSight rate up | |
fst_rate_dn
| short | ForeSight rate down | |
fst_fast_dn
| short | ForeSight fast down | |
fst_qir_to
| short | ForeSight QIR time out | |
fst_max_adj
| int | ForeSight maximum adjustment | |
card_type
| short | local endpoint card type 1 = CDP_SDP 2 = FRP 3 = AIT 4 = FRSM | |
channel_type
| short | channel type( currently used by
connections terminating on FRSM) 1= FR-NetworkInterWorking 2= FR-ServiceInterWorking-Transparent 3= FR-ServiceInterWorking-Translate 4= FR-FUNI default = 0 | |
fecn
| short | forward explicit congestion notification default = 0 | |
de_to_clp_map
| short | discard-eligible to CLP mapping default = 0 | |
clp_to_de_map
| short | CLP to discard-eligible mapping default = 0 | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
obj_id
| yes | int | IPX/BPX object ID |
l_node_id
| yes | int | local SV Plus node ID |
object_type
| yes | short | object type 0 = connection 1 = circuit line 2 = packet line 3 = frame relay port |
stat_type
| yes | short | statistic type
See Note 1 |
bucket_type
| yes | short | duration, in minutes, of the bucket |
owner_netw_id
| short | IPX network ID to which SV Plus is connected | |
owner_node_id
| short | IPX Node ID to which SV Plus is connected | |
num_buckets
| short | maximum number of buckets residing in the IPX real-time memory | |
bucket_size
| short | size of bucket in bytes | |
retain_peak
| short | flag to indicate to have peak saved. A two byte value where:
High order byte has the format: bit 7 (high) 0 = interval in minutes Low order byte has the format: 0 = don't save peak | |
auto_stat
| short | flag to indicate whether the statistic is enabled by system by default
0 = not enabled by default | |
enable_flag
| short | flag to indicate the active status of the statistic type
0 = inactive | |
collect_interval
| int | the time interval in minutes to collect statistical data | |
enable_time
| int | the UNIX time when the statistic was enabled | |
retain_period
| int | the duration period in minutes of the records saved in the SV Plus database | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | long | timestamp of the statistical record |
pln_obj_id
| yes | int | packet line IPX object ID |
l_node_id
| yes | int | local SV Plus node ID |
stat_type
| yes | short | statistic type
See Note 1 |
bucket_type
| yes | short | duration, in minutes, of each bucket |
totald
| int | total of raw data collected in the sample interval | |
peak
| int | peak rate of raw data in the sample interval |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | timestamp of the statistical record |
cln_obj_id
| yes | int | circuit line IPX object ID |
l_node_id
| yes | int | local SV Plus node ID |
stat_type
| yes | short | statistic type
See Note 1 |
bucket_type
| yes | short | duration, in minutes, of each bucket |
totald
| int | total of raw data collected in the sample interval | |
peak
| int | peak rate of raw data in the sample interval |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | timestamp of the statistical record |
frp_obj_id
| yes | int | frame relay port IPX object ID |
l_node_id
| yes | int | local SV Plus node ID |
stat_type
| yes | short | statistic type
See Note 1 |
bucket_type
| yes | short | duration, in minutes, of each bucket |
totald
| int | total of raw data collected in the sample interval | |
peak
| int | peak rate of raw data in the sample interval |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | timestamp of the statistical record |
con_obj_id
| yes | int | connection IPX object ID |
l_node_id
| yes | int | local SV Plus node ID |
stat_type
| yes | short | statistic type
See Note 1 |
bucket_type
| yes | short | duration, in minutes, of each bucket |
totald
| int | total of raw data collected in the sample interval | |
peak
| int | peak rate of raw data in the sample interval |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
network
| yes | short | SV+ network ID |
node_id
| yes | int | SV+ node ID |
slot
| yes | short | slot number of FR card |
port
| yes | short | port number |
IP address
| char(16) | IP address of device on port | |
type
| short | type of port
0 = UNI FRP | |
reserved
| int | reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
lcon_obj_id
| yes | int | logical connection object id |
src_node_id
| yes | int | SV+ source node id in the routes |
lcon_type
| yes | short | local lcon or junction lcon lcon (0) junction (1) |
round_trip_delay
| short | round trip delay (only applicable to local lcon) | |
dst_node_id
| int | SV+destination node id in the local routes | |
l_lcon_index
| short | local logical connection index | |
r_lcon_index
| short | remote logical connection index | |
r_lcon_p_index
| short | remote logical partner connection index | |
j_dst_node_id
| int | SV+ destination node in the junction route | |
cos
| short | Class of ServiceFalse (0)
True (1) | |
group_flag
| short | grouped connection False (0) True (1) | |
avoid_trk_type
| short | Trunk types to avoid: None (1) Satellite (2) Terrestrial (3) | |
avoid_zcs
| short | Avoid ZCS trunks False (0) True (1) |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
l_con_id
| yes | int | the logical connection object id. It can be either a junction logical connection id or a non-junction connection id. |
owner_node_id
| yes | int | the SV+ node id that owns the route |
hop_node_id
| yes | int | the source SV+ node id |
route_type
| yes | short | current or preferred route current (0) preferred (1) junction preferred (3) |
hop_number
| short | the hop number | |
src_line_number
| short | the source trunk line number |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
con_obj_id
| yes | int | ATM Connection BPX object id |
lcon_obj_id
| int | Logical Connection Object ID | |
master_flag
| short | Flag that indicates if this end is the master. True (1) False (0) | |
l_network_id
| short | local SV Plus network ID | |
l_node_id
| yes | int | local SV Plus node ID |
termination
| short | Type of local and remote end-points.
Bit(0)--Local end has feeder Voice_Data (0) | |
l_slot
| short | Local slot number | |
l_port
| short | Local port number | |
l_vpi
| short | Local vpi number | |
l_vci
| int | Local vci number | |
r_network_id
| short | Remote SV+ network id | |
r_node_id
| int | Remote SV+ node id | |
r_slot
| short | Remote slot number | |
r_port
| short | Remote port number | |
r_vpi
| short | Remote vpi number | |
r_vci
| int | Remote vci number | |
con_type
| short | Connection type (e.g. voice, data, frame relay, atm connection etc.) ATM = 6 | |
sub_type
| short | Connection subtype
ATF = 1 VBR = 2 CBR = 3 unknown = 4 ABR = 5 | |
mir
| int | minimum information rate in cells per second | |
qir
| int | quiescent information rate in cells per second | |
pir
| int | peak information rate in cells per second | |
cir
| int | commited information rate in bits per second | |
per_util
| short | Percent Utilization | |
comment
| char [20 + 1] | Comment field to be used to further qualify the ATM connection | |
active
| short | Connection active state
This field in unused. | |
status
| short | Connection status field
1 = Clear 2 = Failed 3 = Down | |
con_info_flag
| short | Connection information fla
Enabled (1) Disabled (0) High Priority (1) | |
ibs
| int | initial burst size | |
vc_q_depth
| int | vc queue depth in bytes | |
efci_q_threshold
| short | EFCI queue threshold | |
cbs
| int | committed burst size | |
mfs
| int | maximum frame size | |
ccdv
| int | CCDV | |
clp_hi
| short | CLP high threshold | |
clp_lo
| short | CLP low threshold | |
fst_rate_up
| short | ForeSight rate up | |
fst_rate_dn
| short | ForeSight rate down | |
fst_fast_dn
| short | ForeSight fast down | |
fst_qir_to
| short | ForeSight QIR time out | |
fst_max_adj
| int | ForeSight maximum adjustment | |
clp_tagging
| int | CLP tagging | |
upc_enable
| int | UPC enable | |
rm_enable
| int | RM enable | |
u_fgcra
| int | FGCRA | |
u_scr_policing
| int | SCR policing | |
u_pcr01
| int | PCR 0 + 1 | |
ccdv01
| int | CCDV 0 + 1 | |
ccdv0
| int | CCDV 0 | |
reserved
| int | Reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
atfcon_obj_id
| yes | int | ATF Connection IPX/BPX object id |
lcon_obj_id
| int | Logical Conn. Object Id | |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
l_slot
| short | Local slot number | |
l_port
| short | Local port number | |
l_dlci
| short | Local dlci number | |
l_vpi
| short | Local vpi number | |
l_vci
| int | Local vci number | |
r_network_id
| short | Remote SV+ network id | |
r_node_id
| int | Remote SV+ node id | |
r_slot
| short | Remote slot number | |
r_port
| short | Remote port number | |
r_dlci
| short | Remote dlci number | |
r_vpi
| short | Remote vpi number | |
r_vci
| int | Remote vci number | |
con_type
| short | Connection type (e.g. voice, data, frame relay, atf connection etc.) | |
mir
| int | MIR | |
qir
| short | QIR | |
pir
| int | PIR | |
cir
| int | CIR | |
per_util
| short | Percent Utilization | |
comment
| char [20 + 1] | Comment field to be used to further qualify the ATF connection | |
active
| short | Connection active state | |
status
| short | Connection status field | |
con_info_flag
| short | Connection information flags | |
reserved
| int | Reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
asiLine_obj_id
| yes | int | ASI line BPX object id |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
card_type
| short | ASI line card type
(ASI_T3 = 106, ASI_E3 = 107) | |
interface
| short | ASI line interface type (3 = T3/E3) | |
l_slot
| short | ASI line slot number | |
l_port
| short | ASI line port number | |
comment
| char [20 + 1] | Comment field to be used to further qualify the ASI Line | |
active
| short | ASI line active state
(This field is unused) | |
status
| short | ASI line status field
1 = Clear 2 = Failed | |
reserved
| int | Reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
asiPort_obj_id
| yes | int | ASI port BPX object id |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
l_slot
| short | ASI slot number | |
l_port
| short | ASI port number | |
port_speed
| int | Port speed (baud rate) in 100 bps | |
comment
| char [20 + 1] | Comment field to be used to further qualify the ASI Port | |
active
| short | ASI port active state
(This field is unused) | |
status
| short | ASI port status field
1 = Clear 2 = Failed. | |
reserved
| int | Reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
fpdcon_obj_id
| yes | int | FastPAD Connection FastPAD object id |
lcon_obj_id
| int | Logical Conn. Object Id | |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
l_slot
| short | Local slot number | |
l_port
| short | Local port number | |
l_subtype
| short | Local FastPAD connection subtype (e.g. voice, data, session, etc.) | |
l_fpdslot
| short | Local FastPAD slot number | |
l_fpdport
| short | Local FastPAD port number | |
l_fpddlci
| int | Local FastPAD DLCI number | |
r_network_id
| short | Remote SV+ network id | |
r_node_id
| int | Remote SV+ node id | |
r_slot
| short | Remote slot number | |
r_port
| short | Remote port number | |
r_subtype
| short | Remote FastPAD connection subtype (e.g. voice, data, session, etc.) | |
r_fpdslot
| short | Remote FastPAD slot number | |
r_fpdport
| short | Remote FastPAD port number | |
r_fpddlci
| int | Remote FastPAD DLCI number | |
con_type
| short | Connection type (e.g. voice, data, frame relay, atm, atf, FastPAD etc.)
0 = ADPCM voice | |
rate_info
| short | Combination field of rate info: bit(7) Fast EIA Enabled(1)/Disabled(0) bit(6) DFM Enabled(1)/Disabled(0) bits(5-3) Encoding: undefined(0) 7/8(1) 8/8(2) 8/8l(3) 7/8E(4) bit(2-0) Load Type: undefined(0) voice(1) non-TS(2) TS(3) Bursty Data A(4) Bursty Data B(5) | |
l_load_unit
| short | Local max number of packets per second allocated | |
r_load_unit
| short | Remote max number of packets per second allocated | |
mir
| short | Minimum Information Rate in hundreds of bits per second. | |
comment
| char [20 + 1] | Comment field to be used to further qualify the FastPAD connection. | |
active
| short | Connection active state
(This field is unused). | |
status
| short | Connection status field
1 = Clear 2 = Failed 3 = Down | |
conn_info_flag
| short | Connection information flags
Enabled (1) Disabled (0) High Priority (1) | |
reserved
| int | Reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
ftcPort_obj_id
| yes | int | FTC port IPX object id |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
l_slot
| short | FTC slot number | |
l_port
| short | FTC port number | |
port_speed
| int | Port speed (baud rate x 100 bps) | |
comment
| char [20 + 1] | Comment field to be used to further qualify the FTC Port | |
active
| short | FTC port active state
(This field is unused) | |
status
| short | FTC port status field
1 = Clear 2 = Failed | |
reserved
| int | Reserved for future use |
| Column Name | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
fpdNode_obj_id
| yes | int | FastPAD node object id |
network_id
| short | SV+ network id | |
node_id
| yes | int | SV+ node id |
ipx_netw_id
| short | IPX network id | |
ipx_node_id
| int | IPX node id | |
l_slot
| short | FastPAD slot number | |
l_port
| short | FastPAD port number | |
fpd_name
| char [9 + 1] | FastPAD name | |
active
| short | FastPAD active state | |
status
| short | FastPAD status field | |
reserved
| int | Reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | Timestamp of the statistical data record |
fpdcon_obj_id
| yes | int | FastPAD connection IPX object id |
l_node_id
| yes | int | Local SV+ node id |
stat_type
| yes | short | Statistic type (object dependent field) |
bucket_type
| yes | short | Bucket type (duration in minutes of each collection bucket) |
totald
| int | Total raw data collected in the sample interval | |
peak
| int | Peak raw data in the sample interval |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | Timestamp of the statistical data record |
asiLine_obj_id
| yes | int | ASI line BPX object id |
l_node_id
| yes | int | Local SV+ node id |
stat_type
| yes | short | Statistic type (object dependent field) |
bucket_type
| yes | short | Bucket type (duration in minutes of each collection bucket) |
totald
| int | Total raw data collected in the sample interval | |
peak
| int | Peak raw data in the sample interval |
ColumnName
| Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | Timestamp of the statistical data record |
asiPort_obj_id
| yes | int | ASI port BPX object id |
l_node_id
| yes | int | Local SV+ node id |
stat_type
| yes | short | Statistic type (object dependent field) |
bucket_type
| yes | short | Bucket type (duration in minutes of each collection bucket) |
totald
| int | Total raw data collected in the sample interval | |
peak
| int | Peak raw data in the sample interval |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
timestamp
| yes | int | Timestamp of the statistical data record |
ftcPort_obj_id
| yes | int | FTC port IPX object id |
l_node_id
| yes | int | Local SV+ node id |
stat_type
| yes | short | Statistic type (object dependent field) |
bucket_type
| yes | short | Bucket type (duration in minutes of each collection bucket) |
totald
| int | Total raw data collected in the sample interval | |
peak
| int | Peak raw data in the sample interval |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
obj_id
| int | Feeder (BIS) object id | |
name
| char(11) | name of BIS | |
type
| short | feeder type | |
subtype
| short | Flag that indicates if this BIS is a feeder. True (feeder only) (1) False (routing only) (0) | |
ipaddress
| yes | int | IP address of Feeder shelf |
p_ipaddress
| yes | int | IP address of Feeder's parent node |
p_slot
| short | Parent slot number | |
p_port
| short | Parent port number | |
f_slot
| short | Feeder slot number | |
f_port
| short | Feeder port number | |
status
| short | Alarm status of a BIS object
0 = clear 1 = minor 2 = major 3 = unreachable | |
active
| short | BIS object active state |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
network_id
| short | SV+ network id | |
name
| char(10) | name of shelf | |
mac_addr
| char(6) | MAC address | |
routing_ip_addr
| int | IP address for routing | |
lan_ip_addr
| int | IP address of Feeder shelf | |
slip_ip_addr
| int | SLIP IP address | |
shelf
| yes | int | shelf number |
serial_id
| char(21) | backplane serial number | |
shelf_type
| short | Shelf type based on number of slots
1 = 16 slot shelf (currently only used by AXIS) | |
status
| short | ASM Alarm status of the shelf object
ASM alarm off (1) ASM alarm on (2) | |
reserved
| int | reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
network_id
| small | SV+ network id | |
shelf
| yes | int | shelf number |
alarm_type
| yes | short | Alarm status of the Shelf:
other (1) temprature (2) Power Supply (3) DC level (4) Fan unit (5) |
unit_num.
| yes | short | Unit numbers |
status
| int | Physical Alarm state | |
severity
| short | Alarm severity
minor (1) major (2) | |
alarm_num.
| short | Alarm number | |
reserved
| int | reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
network_id
| short | SV+ network id | |
shelf
| yes | int | shelf number |
slot
| yes | short | Slot number |
fc_type
| short | Front card type
other (1), bsc (2), aum-T3 (10), tim (20), frsm-4T1 (30), frsm-4E1 (31), ausm-4T1 (40), ausm-4E1 (41) | |
fc_dscrp
| char(21) | Front card description | |
fc_serial_num
| char(7) | Front card serial number | |
fc_hw_rev
| char(3) | Front card hardware revision | |
fc_fw_rev
| char(21) | Front card firmware revision | |
fc_reset_reason
| int | Front card Reset reason
Power Up (1), Parity Error (2), watchDog (3), Resource Overflow (4), Clear All Config (5), Missing Task (6) | |
fc_state
| int | Front card state
No Card (1), Standby (2), Active (3), Failed (4), Self Test (5), Held in Reset (6), | |
mib_version
| int | MIB version number | |
bc_type
| short | Back card type
lm-ASC (2), lm-DB15-4T1 (16), lm-DB15-4E1 (17), lm-BNC-4E1 (18), lm-T3-E3-D (32), lm-T3-E3-B (33) | |
bc_dscrp
| char(21) | Back card description | |
bc_serial_num
| char(7) | Back card serial number | |
bc_hw_rev
| char(3) | Back card hardware revision | |
bc_fw_rev
| char(9) | Back card firmware revision | |
bc_state
| short | Back card state
Not Present (1) Present (2) | |
rate_up
| int | Rate up ( FRSM only) | |
rate_dn
| int | Rate down ( FRSM only) | |
fast_dn
| int | Rate fast down ( FRSM only) | |
measure_time
| int | RTD measure time ( FRSM only) | |
qir_timeout
| int | QIR timeout ( FRSM only) | |
chan_allowed
| short | Channelized data allowed (FRSM only) | |
rate_ctrl_allowed
| short | Rate control allowed (FRSM only) | |
out_of_sync
| short | Configuration upload failed during last resynchronization | |
reserved
| int | reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
obj_id
| yes | int | dsx1 or dsx3 line object id |
network_id
| small | SV+ network id | |
shelf
| int | shelf number | |
slot
| short | slot number | |
line
| short | line number | |
line_type
| short | line type
DS1_LINE (T1/E1) = 1 DS3_LINE (T3/E3) = 2 | |
connector
| short | dsx1 line connector type (dsx1 only)
DB-15 (1) BNC (2) | |
enable
| short | dsx1 line enable/disable(dsx1 only)
enable (1) disable (2) | |
subtype
| short | dsx1 or dsx3 line type
For dsx1-line: dsx1ESF (1), dsx1D4 (2), dsx1E1 (3), dsx1E1CRC (4), dsx1E1MF (5), dsx1E1CRC-MF (6), dsx1E1clearchannel (7) For dsx3-line: dsx3 Cbit Parity (1), g834-g804 (2) | |
coding
| short | Line coding
dsx1JBZS (1), dsx1B8ZS (2), dsx1HDB3 (3), dsx1AMI (4) | |
length
| short | Line length
For T1 lines: 0 to 110 Feet (1), 110 to 220 Feet (2), 220 to 330 Feet (3), 330 to 440 Feet (4), 440 to 550 Feet (5), 550 to 660 Feet (6), 660 Feet Plus (7), For E1 lines: lineLength--75-Ohm (8), lineLength--120-Ohm (9) | |
clock_src
| short | Line Xmt clock source (dsx1 only)
LoopTiming (1), LocalTiming (2) | |
loopback
| short | Line loopback command | |
line_bitmap
| int | Bit map of used DS0 for line (bit 0 corresponds to timeslot1, bit 31 corresponds to timeslot 32, FRSM only) | |
oof_criteria
| short | Line Out of Frame Criteria (dsx3 only)
1=3 of 8 Framing bits in error 2 = 3 0f 16 Framing bits in error | |
aisc_check
| small | Line AISc Bits Check (dsx3 only)
1 = Check 'C' bits 2 = Ignore 'C' bits | |
tx_timing_marker
| small | Transmit Timing Marker | |
tx_payload_type
| small | Transmit Payload Type | |
comment
| char(21) | Comment field to be used to further qualify the line | |
red_severity
| short | Received LOS/OOF alarm severity
1 = Minor 2 = Major | |
rai_severity
| short | RAI alarm severity
1 = Minor 2 = Major | |
stat_severity
| short | Statistical alarm severity
1 = Minor 2 = Major | |
alarm_state
| int | Line alarm state It is represented by bitmap 0 = No Alarm 1 = Receiving RAI 2 = Transmitting RAI 4 = Receiving AIS 8 = Transmitting AIS 16= Receiving OOF 32= Receiving LOS 64= Near End Local Loopback in effect 128= Near End Remote Loopback in effect 256= Receiving test pattern | |
stat_alarm_state
| int | Statistical Alarm state
(Currently unused in SV+) | |
agg_state
| short | Aggregate Alarm state
0 = No alarm 15 = One of the parents in object hierarchy (such as card) is in alarm. | |
reserved
| int | reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
obj_id
| yes | int | PLCP object id |
network_id
| short | SV+ network id | |
shelf
| int | shelf number | |
slot
| short | Slot number | |
line
| short | line number | |
plcp
| short | PLCP number | |
enable
| short | enable/disable Not used in Release 8.1 | |
cell_frm
| short | PLCP Cell framing (PLCP, ATM) | |
scramble
| short | PLCP payload scramble enable/disable
1 = enableScrambling 2 = disableScrambling | |
loopback
| short | PLCP loopback configuration | |
commentc
| char(21) | Comment field to be used to further qualify the PLCP | |
red_severity
| short | Received LOS/OOF alarm severity
1 = Minor 2 = Major | |
rai_severity
| short | RAI alarm severity
1 = Minor 2 = Major | |
lss_severity
| short | LSS alarm severity
1 = Minor 2 = Major | |
stat_severity
| short | Statistical alarm severity
1 = Minor 2 = Major | |
alarm_state
| int | PLCP alarm state Its represented by bitmap
0 = No Alarm 1 = Receiving RAI 2 = Transmitting RAI 4 = Receiving OOF State 8 = Receiving LSS Link UP 16 = Trasmitting LSS Link UP 32 = Receiving LSS Link Down 64 = Trasmitting LSS Link Down 128 = Local Loopback state 256 = Remote Line Loopback state | |
stat_alarm_state
| int | Statistical Alarm state
(Unused in Release 8.1) | |
agg_state
| short | Aggregate Alarm state:
0 = No alarm 15 = One of the parents in object hierarchy (such as card) is in alarm. | |
reserved
| int | reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
con_obj_id
| yes | int | Connection object id (a.k.a. VC/End-Point Index) |
master_flag
| short | Flag that indicates if this end is the master. | |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id for IPX or AXIS |
shelf
| int | Shelf number | |
termination
| short | Local and remote termination type | |
l_slot
| short | Local slot number | |
l_port
| short | Local port number (physical port number) | |
l_vpi
| short | Local vpi number | |
l_vci
| short | Local vci number | |
r_network_id
| short | Remote SV+ network id | |
r_node_id
| int | Remote SV+ node id | |
r_slot
| short | Remote slot number | |
r_port
| short | Remote port number (physical port number) | |
r_vpi
| short | Remote vpi number | |
r_vci
| short | Remote vci number | |
r_subtype
| short | Remote FastPAD connection subtype (e.g. voice, data, session, etc.) | |
con_type
| short | Connection type (e.g. voice, data, frame relay, atm, atf, FastPAD etc.)
0 = ADPCM voice | |
rate_info
| short | Combination field of rate info: bit(7) Fast EIA Enabled(1)/Disabled(0) bit(6) DFM Enabled(1)/Disabled(0) bits(5-3) Encoding: undefined(0) 7/8(1) 8/8(2) 8/8l(3) 7/8E(4) bit(2-0) Load Type: undefined(0) voice(1) non-TS(2) TS(3) Bursty Data A(4) Bursty Data B(5) | |
l_load_unit
| int | Max size of the reassembly buffer (in octets) | |
cell_loss_period
| int | Cell loss integration period in milliseconds. | |
cdv_rx_t
| int | Maximum cell arrival jitter tolerated by the reassembly process (in 10 microsecond increments) | |
comment
| char [20 + 1] | Comment field to be used to further qualify the CESM connection. | |
active
| short | Connection active state
(This field is unused). | |
status
| short | Connection status field
1 = Clear 2 = Failed 3 = Down |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
ausmp_obj_id
| yes | int | ATM port object id |
l_network_id
| short | Local SV+ network id | |
l_node_id
| yes | int | Local SV+ node id |
shelf
| int | Shelf number | |
l_slot
| short | Local slot number | |
line
| short | Line number associated with this port | |
l_port
| short | Local port number for frp and starting channel number | |
port_speed
| int | Port speed (baud rate x 100 bps) | |
comment
| char [20 + 1] | Comment field to be used to further qualify the AUSM port | |
active
| short | AUSM port active state
(This field is unused) | |
status
| short | AUSM port alarm status field
1 = Clear 2 = Failed | |
signal_state
| int | Port signalling state | |
port_type
| short | Type of port | |
interface_type
| short | Type of interface | |
protocol_type
| short | Signalling protocol type (No signalling, ILMI) | |
poll_timer
| short | T491 polling interval | |
err_thresh
| short | N491 error threshold | |
signalling_vpi
| int | Signalling VPI | |
signalling_vci
| int | Signalling VCI | |
ilmi_trap_enable
| short | ILMI Trap Enable state | |
trap_interval
| short | Minimum interval between traps | |
keep_alive
| short | Keep alive polling state | |
event_thresh
| short | N492 event threshold | |
min_enquiry
| short | T493 minimum enquiry interval | |
addr_Prefix
| char [20 + 1] | Network Prefix for the ATM address | |
reserved
| int | Reserved for future use |
| ColumnName | Unique Identifier Field | Data Type | Description |
|---|---|---|---|
node_id
| yes | int | SV+ node id of the AXIS |
name
| char (10 +1) | name of DNS node | |
ip_addr
| int | IP address of the DNS node | |
p_node_name
| char (10 +1) | name of primary DNS node | |
redun_name
| char (10 +1) | name of redundant DNS node | |
redun_ip_addr
| int | IP address of the redundant DNS node | |
alarm_status
| short | Alarm status of the DNS node object
Alarm off (1) Alarm on (2) | |
oper_status
| short | Current operating status of the DNS node object
Active (1) Standby (2) | |
reserved
| int | reserved for future use |
The value in the statistic type field depends upon the object type and the type of statistic as follows:
4 = packets received
5 = receive packets discarded
6 = packets transmitted
7 = projected packets transmitted
8 = supervisory packets transmitted
13 = seconds V.35 modem on
14 = seconds DSI enabled
15 = seconds off-hook
16 = seconds in service
19 = supervisory packets received
6 = packets transmitted
7 = projected packets transmitted
8 = supervisory packets transmitted
16 = seconds in service
19 = supervisory packets received
0 = frames received
1 = received frames discarded
2 = frames transmitted
3 = transmitted frames discarded
4 = packets received
6 = packets transmitted
9 = bytes received
10 = receive bytes discarded
11 = bytes transmitted
12 = transmit bytes discarded
16 = seconds in service
17 = frames transmitted with FECN
18 = frames transmitted with BECN
20 = minutes congested
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
25 = frames received in excess of CIR
26 = bytes received in excess of CIR
27 = frames transmitted in excess of CIR
28 = bytes transmitted in excess of CIR
29 = IWF Frames received and Aborted
30 = IWF Frames received with the EFCI bit set
31 = Rx frames discarded-deroute/down
32 = Rx bytes discarded-deroute/down
33 = Rx frames discarded VC Q overflow
34 = Rx bytes discarded VC Q overflow
35 = Tx frames discarded Q overflow
36 = Tx bytes discarded Q overflow
37 = Tx frames discarded ingress CRC
38 = Tx bytes discarded ingress CRC
39 = Tx frames discarded trunk discard
40 = Tx bytes discarded trunk discard
41 = Tx frames during egress LMI fail
42 = Tx bytes during egress LMI fail
0 = Frames received
1 = Received frames discarded
2 = Frames transmitted
3 = Transmit frames discarded
4 = Packets received
5 = Receive packets discarded
6 = Packet transmitted
9 = Bytes received
10 = Received bytes discarded
11 = Bytes transmitted
12 = Transmitted bytes discarded
16 = Seconds in service
17 = Frames transmitted with FECN
18 = Frames transmitted with BECN
20 = Minutes congested
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
25 = Frames received in excess of CIR
26 = Bytes received in excess of CIR
27 = Frames transmitted in excess of CIR
28 = Bytes transmitted in excess of CIR
29 = IWF frames received and aborted
30 = IWF frames received with EFCI bit set.
31 = Rx frames discarded- deroute/down
32 = Rx bytes discarded-deroute/down
33 = Rx frames discarded-VC-Q-overflow
34 = Rx bytes discarded-VC-Q-overflow
35 = Tx frame discarded-trunk discard
36 = Tx bytes discarded-Q-overflow
37 = Tx frames discarded-trunk discard
38 = Tx bytes discarded-ingress CRC
39 = Tx frames discarded-trunk discard
40 = Tx bytes discarded--trunk discard
41 = Tx frames during ingress LMI fail
42 =Tx bytes during ingress LMI fail
0 = Frames received
1 = Received frames discarded
2 = Frames transmitted
3 = Transmitted frames discarded
4 = Packets received
5 = Receive packets discarded
6 = Packets transmitted
9 = Bytes received
10 = Receive bytes discarded
11 = Bytes transmitted
12 = Transmitted bytes discarded
16 = seconds in service
17 = Frames transmitted with BECN
18 = Frames transmitted with FECN
20 = Minutes congested
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
25 = Frames received in excess of CIR
26 = Bytes received in excess of CIR
27 = Frames transmitted in excess of CIR
28 = Bytes transmitted in excess of CIR
29 = IWF frames received and aborted
30 = IWF frames received with EFCI bit set.
31 = Rx frames discarded-deroute/down
32 = Rx bytes discarded-deroute/down
33 = Rx frames discarded-VC-Q-overflow
34 = Rx bytes discarded-VC-Q-overflow
35 = Tx frames discarded-Q-overflow
36 = Tx bytes discarded-Q-overflow
37 = Tx frames discarded-ingress CRC
38 = Tx bytes discarded-ingress CRC
39 = Tx frames discarded-trunk discard
40 = Tx bytes discarded-trunk discard
41 = Tx frames du ring ingress LMI fail
42 = Tx bytes during ingress LMI fail
0 = Frames received
1 = Received frames discarded
2 = Frames transmitted
3 = Transmitted frames discarded
4 = Packets received
5 = Receive packets discarded
6 = Packets transmitted
9 = Bytes received
10 = Receive bytes discarded
11 = Bytes transmitted
12 = Transmitted bytes discarded
16 = seconds in service
17 = Frames transmitted with FECN
18 = Frames transmitted with BECN
20 = Minutes congested
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
25 = Frames received in excess of CIR
26 = Bytes received in excess of CIR
27 = Frames transmitted in excess of CIR
28 = Bytes transmitted in excess of CIR
29 = IWF frames received and aborted
30 = IWF frames received with EFCI bit set.
31 = Rx frames discarded-deroute/down
32 = Rx bytes discarded-deroute/down
33 = Rx frames discarded-VC-Q-overflow
34 = Rx bytes discarded-VC-Q-overflow
35 = Tx frames discarded-Q-overflow
36 = Tx bytes discarded-Q-overflow
37 = Tx frames discarded-ingress CRC
38 = Tx bytes discarded-ingress CRC
39 = Tx frames discarded-trunk discard
40 = Tx bytes discarded-trunk discard
42 = Tx bytes during ingress LMI fail
0 = Frames received
1 = Received frames discarded
2 = Frames transmitted
3 = Transmitted frames discarded
4 = Packets received
5 = Receive packets discarded
6 = Packets transmitted
9 = Bytes received
10 = Receive bytes discarded
11 = Bytes transmitted
12 = Transmitted bytes discarded
16 = Seconds in service
17 = Frames transmitted with FECN
18 = Frames transmitted with BECN
20 = Minutes congested
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
25 = Frames received in excess of CIR
26 = Bytes received in excess of CIR
27 = Frames transmitted in excess of CIR
28 = Bytes transmitted in excess of CIR
31 = Rx frames discarded-deroute/down
32 = Rx bytes discarded-deroute/down
33 = Rx frames discarded-VC-Q-overflow
34 = Rx bytes discarded-VC-Q-overflow
35 = Tx frames discarded-Q-overflow
36 = Tx bytes discarded-Q-overflow
37 = Tx frames discarded-ingress CRC
38 = Tx bytes discarded-ingress CRC
39 = Tx frames discarded-trunk discard
40 = Tx bytes discarded-trunk discard
41 = Tx frames during ingress LMI fail
42 =Tx bytes during ingress LMI fail
1 = Received frames discarded
6 = Packets transmitted
12 = Transmitted bytes discarded
16 = Seconds in service
21 = DE frames received
28 = Bytes transmitted in excess of CIR
29 = Cells Rx port
30 = Frames Rx port
31 = Cells Tx network
32 = CLP Rx port
33 = Non-comp CLP Rx port
34 = Discard CLPth Rx port
35 = Discard Qfull Rx port
36 = EFCI Rx port
37 = AAL5 Rx port
38 = Non-comp Rx port
39 = Discarded failed Rx port
40 = AAL5 discarded Qfull Rx port
41 = Average Cell Q Depth
42 = Discarded Rsrc overflow Rx port
43 = Discarded Sbin full Rx port
44 = EFCI Tx port
45 = Cells Tx port
46 = Cells Rx network
47 = Discarded Qbin full
48 = Discarded Qbin CLPth port
49 = CLP Tx port
50 = BCM Rx port
51 = BCM Tx network
52 = OAM Tx network
53 = AIS Rx port
54 = FERF Rx port
0 = Frames received
1 = Received frames discarded
2 = Frames transmitted
3 = Transmitted frames discarded
9 = Bytes received
10 = Receive bytes discarded
11 = Bytes transmitted
12 = Transmitted bytes discarded
17 = Frames transmitted with FECN
18 = Frames transmitted with BECN
21 = DE frames received
22 = DE frames transmitted
23 = DE frames dropped
24 = DE bytes received
33 = Rx frames discarded-VC-Q-overflow
34 = Rx bytes discarded-VC-Q-overflow
35 = Tx frames discarded-Q-overflow
36 = Tx bytes discarded-Q-overflow
37 = Tx frames discarded-ingress CRC
39 = Tx frames discarded-trunk discard
41 = Tx frames during ingress LMI fail
42 =Tx bytes during ingress LMI fail
16 = Seconds In Service
20 = Minutes Congested
34 = Discard CLPth Rx Port
35 = Discard Qfull Rx Port
55 = Number of Cells Rx w/CLP Set
56 = Number Of Cells Rx w/EFCI Set
57 = Number of Cells Rx w/UPC CLP Set
58 = AAL1 Sequence Mismatch
59 = Discarded Cells for Shelf Alarm
60 = Receive Bytes Discarded
61 = Total Cells Tx from Line
62 = Rx Buffer Underflows
63 = Rx Buffer Overflows
64 = Total Cells Tx to Line
65 = Loss of Pointer
66 = Loss of Cell Delineation
68 = Total Cells Rx from Line
69 = Tx Bytes Discarded-Q-Overflow
70 = Tx Bytes Discarded-Q-Underflow
71 = Total Cells Rx to Line
72 =HCS Correctable Error
0 = bipolar violations
1 = frame slips
2 = out of frames
3 = losses of signal
4 = frame bit errors
5 = CRC errors
0 = bipolar violations
1 = frame slips
2 = out of frames
3 = losses of signal
4 = frame bit errors
5 = CRC errors
6 = out of multi-frames
16 = all ones in timeslot 0
28 = B3ZS Line Code Violations
29 = Line Errored Seconds
30 = Line Severely Errored Seconds
31 = P-bit Line Parity Errors
32 = Errored Seconds - Parity
33 = Severely Errored Seconds - Parity
39 = Unavailable seconds
40 = PLCP BIP-8 Errors
41 = BIP-8 Errored Seconds
42 = BIP-8 Severely Errored Seconds
43 = PLCP Severely Errored Framing Seconds
44 = PLCP Unavailable Seconds
45 = HCS Errors
147 = HCS Errored Seconds
147 = HCS Severely Errored Seconds
150 = YEL Transitions
152 = Alarm Indication Signal
169 = Loss of Cell Delineation
170 = Loss of Pointer
171 = OC3 Path AIS
172 = OC3 Path YEL
173 = Section BIP-8
174 = Line BIP-24
175 = Line FEBE
176 = Path BIP-8
177 = Path FEBE
178 = Section BIP-8 Errored Seconds
179 = Line BIP-24 Errored Seconds
180 = Line FEBE Errored Seconds
181 = Path BIP-8 Errored Seconds
182 = Path FEBE Errored Seconds
184 = Section Severely Errored Framing Seconds
185 = Line BIP-24 Severely Errored Seconds
186 = Line FEBE Severely Errored Seconds
187 = Path BIP-8 Severely Errored Seconds
188 = Path FEBE Severely Errored Seconds
189 = Line Unavailable Seconds
190 = Line Far End Unavailable Seconds
191 = Path Unavailable Seconds
192 = Path Far End Unavailable Seconds
193 = HCS Correctable Error
194 = HCS Correctable Error Errored Seconds
195 = HCS Correctable Error Severely Errored Seconds
2 = out of frames
3 = losses of signal
4 = frame bit errors
0 = bipolar violations
1 = frame slips
2 = out of frames
3 = losses of signal
4 = frame bit errors
5 = CRC errors
8 = packet out of frames
9 = packet CRC errors
10 = bad clock errors
11 = voice packets dropped
12 = TS packets dropped
13 = non-TS packets dropped
14 = High Priority packets dropped
15 = BData A packets dropped
16 = BData B packets dropped
17 = voice packets transmitted
18 = TS packets transmitted
19 = non-TS packets transmitted
20 = High Priority packets transmitted
21 = BData A packets transmitted
22 = BData B packets transmitted
23 = total packets transmitted
24 = BData A CLP packets dropped
25 = BData B CLP packets dropped
26 = BData A EFCN packets transmitted
27 = BData B EFCN packets transmitted
148 = BData A CLP packets transmitted
149 = BData B CLP packets transmitted
2 = out of frames
3 = losses of signal
9 = packet CRC errors
11 = voice packets dropped
12 = TS packets dropped
13 = non-TS packets dropped
14 = high priority packets dropped
15 = BData A packets dropped
16 = BData B packets dropped
17 = voice packets transmitted
18 = TS packets transmitted
19 = non-TS packets transmitted
20 = high priority packets transmitted
21 = BData A packets transmitted
22 = BData B packets transmitted
23 = total packets transmitted
24 = BData A CLP packets dropped
25 = BData B CLP packets dropped
26 = BData A EFCN packets transmitted
27 = BData B EFCN packets transmitted
28 = line code violations
29 = line errored seconds
30 = line severely errored seconds
31 = P-bit parity code violations
32 = errored seconds - line
33 = severely errored seconds - line
34 = C-bit parity code violations
35 = errored seconds - path
36 = severely errored seconds - path
37 = severely errored framing seconds
38 = alarm indication signal seconds
39 = unavailable seconds
45 = ATM cell header HEC errors
47 = Tx voice cells dropped
48 = Tx TS cells dropped
49 = Tx non-TS cells dropped
50 = Tx high priority cells dropped
51 = Tx Bdata A cells dropped
52 = Tx Bdata B cells dropped
53 = voice cells Tx to line
54 = TS cells Tx to line
55 = non TS cells Tx to line
56 = high priority cells Tx to line
57 = Bdata A cells Tx to line
58 = Bdata B cells Tx to line
59 = half full cells Tx to line
60 = full cells Tx to line
61 = total cells Tx to line
62 = Tx Bdata A CLP cells dropped
63 = Tx Bdata B CLP cells dropped
64 = Bdata A EFCN cells Tx to line
65 = Bdata B EFCN cells Tx to line
66 = half full cells Rx from line
67 = full cells Rx from line
68 = total cells Rx from line
69 = total packets Rx from line
70 = Rx voice packets dropped
71 = Rx TS packets dropped
72 = Rx non-TS packets dropped
73 = Rx high priority packets dropped
74 = Rx Bdata A packets dropped
75 = Rx Bdata B packets dropped
82 = Rx Bdata A CLP packets dropped
83 = Rx Bdata B CLP packets dropped
87 = Rx voice cells dropped
88 = Rx TS cells dropped
89 = Rx non-TS cells dropped
90 = Rx high priority cells dropped
91 = Rx Bdata A cells dropped
92 = Rx Bdata B cells dropped
93 = Rx Bdata A CLP cells dropped
94 = Rx Bdata B CLP cells dropped
140 = FEBE counts
141 = FERR counts (M-bit or F-bit)
142 = PLCP FEBE errored seconds
143 = PLCP FEBE severely errored seconds
144 = PLCP FEBE counts
145 = PLCP FE counts
146 = ATM HEC errored seconds
147 = ATM HEC severely errored seconds
148 = BData A CLP Packets Transmitted
149 = BData B CLP Packets Transmitted
160 = CGW Packets Received from the IPX Network
161 = CGW Cells Transmitted to Line
162 = CGW Frames Relayed to Line
163 = CGW Aborted Frames Transmitted to Line
166 = CGW Packets Transmitted to the IPX Network
167 = CGW Cells Receivedfrom Line
171 = CGW Bad CRC-32 Frames Rx From Line
173 = CGW Bad CRC-16 Frames Rx From IPX
177 = OAM Loopback Cells Transmitted
178 = OAM AIS Cells Transmitted
179 = OAM FERF Cells Transmitted
180 = OAM RTD Cells Transmitted
181 = OAM RA Cells Transmitted
183 = OAM CC Cells Transmitted
185 = OAM Loopback Cells Received
186 = OAM AIS Cells Received
187 = OAM FERF Cells Received
188 = OAM RTD Cells Received
189 = OAM RA Cells Received
191 = OAM CC Cells Received
2 = out of frames
3 = losses of signal
28 = B3ZS line code violations
29 = line errored seconds
30 = line severely errored seconds
31 = P-bit parity code violations
32 = errored seconds - line
33 = severely errored seconds - line
34 = C-bit parity code violations
35 = errored seconds - path
36 = severely errored seconds - path
37 = severely errored framing seconds
38 = alarm indication signal seconds
39 = unavailable seconds
45 = ATM cell header HEC errors
47 = Tx voice cells dropped
48 = Tx TS cells dropped
49 = Tx non-TS cells dropped
50 = Tx high priority cells dropped
51 = Tx Bdata A cells dropped
52 = Tx Bdata B cells dropped
53 = voice cells Tx to line
54 = TS cells Tx to line
55 = non TS cells Tx to line
56 = high priority cells Tx to line
57 = Bdata A cells Tx to line
58 = Bdata B cells Tx to line
61 = total cells Tx to line
62 = Tx Bdata A CLP cells dropped
63 = Tx Bdata B CLP cells dropped
64 = Bdata A EFCN cells Tx to line
65 = Bdata B EFCN cells Tx to line
68 = total cells Rx from line
69 = total packets Rx from line
87 = Rx voice cells dropped
88 = Rx TS cells dropped
89 = Rx non-TS cells dropped
90 = Rx high priority cells dropped
91 = Rx Bdata A cells dropped
92 = Rx Bdata B cells dropped
93 = Rx Bdata A CLP cells dropped
94 = Rx Bdata B CLP cells dropped
140 = FEBE counts
141 = FERR counts (M-bit or F-bit)
142 = PLCP FEBE errored seconds
143 = PLCP FEBE severely errored seconds
144 = PLCP FEBE counts
145 = PLCP FE errored seconds
146 = ATM HEC errored counts
147 = ATM HEC severely errored counts
150 = DS3 yellow transition counts
151 = PLCP yellow transition counts
152 = AIS transition counts
155 = Tx voice CLP cells dropped
156 = Tx TS CLP cells dropped
157 = Tx non-TS CLP cells dropped
158 = Tx high priority CLP cells dropped
160 = Tx CBR Cells Served
161 = Tx VBR Cells Served
162 = Tx ABR Cells Served
163 =Tx CBR CLP cells dropped
164 =Tx VBR CLP cells dropped
165 =Tx ABR CLP cells dropped
166 =Tx CBR Overflow cells dropped
167 =Tx VBR Overflow cells dropped
168 =Tx ABR Overflow cells dropped
169 = Loss of Cell Delineation
170 = Loss of Pointer
171 = OC3 Path AIS
172 = OC3 Path YEL
173 = Section BIP-8
174 = Line BIP-24
175 = Line FEBE
176 = Path BIP-8
177 = Path FEBE
178 = Section BIP-8 Errored Seconds
179 = Line BIP-24 Errored Seconds
180 = Line FEBE Errored Seconds
181 = Path BIP-8 Errored Seconds
182 = Path FEBE Errored Seconds
184 = Section Severely Errored Framing Seconds
185 = Line BIP-24 Severely Errored Seconds
186 = Line FEBE Severely Errored Seconds
187 = Path BIP-8 Severely Errored Seconds
188 = Path FEBE Severely Errored Seconds
189 = Line Unavailable Seconds
190 = Line Far End Unavailable Seconds
191 = Path Unavailable Seconds
192 = Path Far End Unavailable Seconds
193 = HCS Correctable Error
194 = HCS Correctable Error Errored Seconds
195 = HCS Correctable Error Severely Errored Seconds
2 = out of frames
3 = losses of signal
4 = frame bit errors
2 = out of frames
3 = losses of signal
45 = ATM Cell Header HEC Errors
142 = PLCP FEBE errored seconds
143 = PLCP FEBE severely errored seconds
144 = PLCP FEBE counts
145 = PLCP FE counts
146 = ATM HEC errored seconds
147 = ATM HEC severely errored seconds
150 = DS3 yellow transition counts
0 = frames received
1 = frames transmitted
2 = bytes received
3 = bytes transmitted
4 = frames transmitted with FECN
5 = frames transmitted with BECN
6 = receive frame CRC errors
7 = invalid format receive frames
8 = receive frame alignment errors
9 = illegal length receive frames
10 = number of DMA overruns
11 = LMI status enquiries
12 = LMI status transmit count
13 = LMI status update count
14 = LMI invalid status enquiries
15 = LMI link timeout errors
16 = LMI keepalive sequence errors
17 = receive frames undefined DLCI errors
18 = DE frames dropped
19 = transmit status enquiries
20 = received status counter
21 = asynchronous status counter
22 = invalid sequence number count
23 = transmit protocol timeout count
24 = CLLM messages frames transmitted
25 = CLLM messages bytes transmitted
26 = CLLM messages frames received
27 = CLLM messages bytes received
28 = CLLM failures
29 = Tx frames discarded queue overflow
30 = Tx bytes discarded queue overflow
31 = Tx frames while ingress LMI fail
32 = Tx bytes while ingress LMI fail
0 = Unknown VPI/VCI
1 = Cell buffer overflow
2 = Non-zero GFC count
5 = AIS Cells received
6 = Ex FERF Cell
7 = Number of cells Rx
8 = Number of cells Rx w/CLP set
9 = Number of cells Rx w/EFCI set
10 = Number of BCM cells Rx
11 = Number of cells Tx
12 = OAM cells Rx count
13 = Tx Payload Err Due to BIP-16 Err
14 = Number of cells Tx w/CLP set
15 = Number of cells Tx w/EFCI set
16 = Tx Header Error Discard
17 = Get Request Rx
18 = GetNextReq Rx
19 = GetNextReq Tx
20 = SetRequest Rx
21 =Traps Rx
22 = GetResp Rx
23 = GetRequest Tx
24 = GetResp Tx
25 = Trap Tx
26 = Unknown Rx
27 = Status Tx
28 = UpdtStatus Tx
29 = Status Ack Tx
30 = Status Enq Rx
31 = Status Enq Tx
32 = Status Rx
33 = UpdtStatus Rx
34 = Status Ack Rx
35 = Invalid LMI Rx
36 = Invalid LMI Length Rx
37 = Unknown LMI Rx
38 = Invalid LMI IE Rx
39 = Invalid Transaction IDs
0 = Frames received
1 = Frames transmitted
2 = Bytes received
3 = Bytes transmitted
4 = Frames transmitted with.FECN
5 = Frames transmitted with.BECN
6 = Receive frame CRC errors
7 = Invalid format receive frames
8 = Receive frame alignment errors
9 = Illegal length receive frames
10 = Number of DMA overruns
11 = LMI status enquiries
12 = LMI status transmit count
13 = LMI status update count
14 = LMI invalid status enquiries
15 = LMI link timeout errors
16 = LMI keepalive sequence errors
17 = Receive frame undefined DLCI errors
18 = DE frames dropped
19 = Transmit status enquiries
20 = Receive status counter
21 = Asynchronous status counter
22 = Invalid sequence number count
23 = Transmit protocol timeout count
24 = CLLM message frames transmitted
25 = CLLM message bytes transmitted
26 = CLLM message frames received
27 = CLLM message bytes received
28 = CLLM failures
29 = Tx frames discarded-queue overflow
30 = Tx bytes discarded-queue overflow
31 = Tx frames while ingress LMI fail
32 =Tx bytes while ingress LMI fail
0 = Frames received
1 = Frames transmitted
2 = Bytes received
3 = Bytes transmitted
4 = Frames transmitted with.FECN
5 = Frames transmitted with.BECN
6 = Receive frame CRC errors
7 = Invalid format receive frames
8 = Receive frame alignment errors
9 = Illegal length receive frames
11 = LMI status enquiries
13 = LMI status update count
14 = LMI invalid status enquiries
15 = LMI link timeout errors
17 = Receive frame undefined DLCI errors
18 = DE frames dropped
19 = Transmit status enquiries
22 = Invalid sequence number count
29 = Tx frames discarded-queue overflow
30 = Tx bytes discarded-queue overflow
31 = Tx frames while ingress LMI fail
32 =Tx bytes while ingress LMI fail
0 = Unknown VPI/VCI
2 = Non-zero GFC count
5 = Rx AIS Cells
6 = Rx FERF Cells
14 = Number of Cells Tx w/CLP Set
15 = Number of Cells Tx w/EFCI Set
17 = Get Request Rx
18 = GetNext Request Rx
20 = Set Request Rx
21 = Trap Rx
22 = Get Response Rx
23 = Get Request Tx
24 = Get Response Tx
25 = Trap Tx
40 = Total Cells Rx from Line
41 = Total Cells Tx to Line
42 = OAM Loopback Cells Rx
43 = OAM Loopback Cells Tx
44 = OAM CRC Err Cells Rx
45 = Tx AIS Cells
46 = Discard Cells Tx for Port Alarm
47 = SNMP PDU Received
48 = Invalid PDU Received
49 = ASN1 Parse Error
50 = No Such Name Error
51 =Too Big Error
|
|