|
|
This appendix contains technical and environmental specifications for the Cisco 2517 and Cisco 2519 hub.
Table A-1 lists the specifications for the Cisco 2517 and Cisco 2519.
Table A-1 Cisco 2517 and Cisco 2519 Hub Specifications
| Specification | Description |
|---|---|
| Dimensions (H x L) | 3.0 x 19.0'' (7.62 x 48.26 cm) |
| Input voltage and frequency | 100--240 VAC, 50--60 Hz |
| Output power | 20.0A maximum @ 5V |
| Power dissipation | 100W maximum |
| Token Ring interfaces | 12 IEEE 802.5 (RJ-45) |
| Serial interfaces | 1 EIA/TIA-232 |
| Operating environment | 50 to 95°F (10 to 35°C) |
| Nonoperating temperature | --4 to 185°F (--20 to 85°C) |
| Operating humidity | 5 to 95%, noncondensing |
Table A-2 lists the technical specifications for the router card.
Table A-2 Router Card Specifications
| Specification | Description |
|---|---|
| Dimensions (H x L) | 4.8 x 13.3'' (12.2 x 33.8 cm) |
| Power requirements | 3.0A @ 5V, 0.5A @ ±12V |
| Processor | 20-MHz Motorola 68EC030 |
| Memory | 2-MB primary memory (DRAM SIMMs, expandable to 6 or 18 MB)4-MB Flash memory (expandable to 8 MB)32-KB NVRAM |
| Network interfaces | 1 BRI and 2 synchronous serial |
| Token Ring interface | 1 IEEE 802.5 (RJ-45) |
| Synchronous serial interfaces | EIA/TIA-232, EIA/TIA-449, V.35, X.21 (NRZ/NRZI(1) and DTE/DCE)EIA-530 (NRZ/NRZI and DTE)All serial cables use a DB-60 chassis connector. |
| BRI | ISDN basic rate (RJ-45) |
| Auxiliary/console port | Asynchronous serial (RJ-45, EIA/TIA-232-compatible) |
| FCC Compliance | This product conforms to FCC Class A compliance requirements. |
|
Copyright 1988-1995 © Cisco Systems Inc.