Removing the Adapter Software

Removing the Driver From a System Running Solaris 2.3

Removing the Driver From a System Running SunOS

After installing the Cisco ATM SBus adapter software, you might need to remove it. A deinstall utility has been provided as part of the software package to allow easy removal of all of the adapter software.

Removing the Driver From a System Running Solaris 2.3

Removal of the driver software will permanently disable functionality of the Cisco ATM SBus adapter on the system until a driver is reinstalled. Perform the following steps to remove the Cisco ATM SBus adapter software from a system running the Solaris operating system:

Step 1 Invoke the following command to remove the driver software:

root@SYS1%         pkgrm catm

Step 2 Invoke the following command to remove the driver from memory:

root@SYS1%         shutdown -y -I6 -g0

Removing the Driver From a System Running SunOS

Removal of the software will disable functionality of the Cisco ATM SBus adapter on the system. Perform the following steps to remove Cisco ATM SBus adapter software from a system running the SunOS operating system:

Step 1 Enter the following command to remove the ZATM package:

root@SYS1% /etc/uninstall_Catm

Step 2 If the rc.local file has been modified (for example, by a third-party installation program) after the Cisco ATM SBus adapter software was installed, restoring the old version (backed up during installation of the Cisco ATM SBus adapter software) will overwrite changes made to the file after it was backed up.

overwrite /etc/rc.local? y|n

Caution If additional changes were made to /etc/rc.local after installation of the Cisco ATM SBus adapter software, then the original /etc/rc.local should not be restored.

Step 3 If no changes were made to the rc.local file, or if you want to re-install applications which have modified the file, respond by typing y and pressing the Return key. The script continues, as follows:

Removing /etc/catmstartup        
Removing /sys/catm/catm.o
Removing /bincatmilmid
Removing /bin/catmlancfg
Removing /bin/catmsig
Removing /bin/atmstat
Removing /etc/atmgui.dat
Removing /etc/ZincApp
Removing /etc/catmilmi.db.sample
Removing /etc/catmlancfg.db.sample
Removing /etc/catmmib.txt
Removing /usr/man/man1/catmilmid.1
Removing /usr/man/man1/catmsig.1
Removing /usr/man/man4/atms.4
rm: remove /etc/uninstall_Catm? y

Table of Contents

Removing the Adapter Software

Removing the Driver From a System Running Solaris 2.3

Removing the Driver From a System Running SunOS