|
|
This chapter describes error messages for Native Service Point used with NetView or NetMaster. It includes explanations of the error messages and actions you can take to resolve the error messages.
The error messages are presented in two sections:
This section provides error messages associated with the NetView version of Native Service Point. The error messages are organized in sections by Native Service Point commands and by error message numbers.
This section provides error messages associated with the NetMaster version of Native Service Point. The error messages are organized in sections by Native Service Point commands and by error message numbers.
Copyright 1988-1995
©
Cisco Systems Inc.
RTRM001 PF key not supported.
Only PF keys shown at the bottom of the panel are supported. You pressed a key that is not supported.
RTRM002 You must exit your session with #RTRSPN or press PF9 to keep it.
RTRM003 Cursor not on a valid line.
RTRM004 SPname must be entered.
RTRM005 Service Point (router) #RTRSPN already managed by #000RT0n.
The service point (router) is being managed by the identified user.
RTRM007 Router command is required.
You pressed Enter without entering a command in the command input area.
RTRM009 Enter PASSWORD.
A password is required to access the service point.
RTRM010 There is no previous PANEL. Please PRESS another KEY.
You pressed the PF7 when 7=BACK was not at the bottom of the panel.
RTRM011 There is no continuation Panel. Please PRESS another KEY.
You pressed the PF8 key when 8=FWD was not at the bottom of the panel.
RTRM014 VTAM Error, #RTRSPN not responding. See the LOG.
The service point is not available to VTAM.
dis spname. The service point must be ACTIV for a RUNCMD to be routed to the service point.
RTRM016 No Command to retrieve.
You have already retrieved the last command in the retrieve queue. There are no more commands to be retrieved.
RTRM018 Bad Return Code returned from RUNCMD. RETCODE=#RETCODE
An error occurred with the RUNCMD.
RTRM019 LU 6.2 Session Failed &MSGSTR
This message displays when there is an error in trying to send a RMTCMD to another NetView.
RTRM020 No NNT or LU6.2 Session.
This message displays if a LU6.2 session cannot be established and a NNT session is unavailable for use. If RTRCMD cannot send a command to the target NetView, the RUNCMD failed and a ROUTE&DOMAIN command also failed.
RTRM021 TIMEOUT-The WAIT operation used to collect data timed out.
This message displays whenever the WAIT operation failed to obtain a response in the time specified in the TIMEOUT field.
RTRM022 More data available. Enter Y to continue, N to terminate.
This message displays when the router indicates that more output is available.
rtrmgr Command
RTRM501 PF key not supported.
Only PF keys shown at the bottom of the panel are supported. You pressed a key that is not supported.
RTRM510 There is no previous PANEL. Please PRESS another KEY.
You pressed the PF7 when 7=BACK was not at the bottom of the panel.
RTRM511 There is no continuation Panel. Please PRESS another KEY.
You pressed the PF8 key when 8=FWD was not at the bottom of the panel.
Error Messages for NetMaster Version
rtrcmd Command
RTRM001 PF key not supported.
Only PF keys shown at the bottom of the panel are supported. You pressed a key that is not supported.
RTRM002 You must exit your session with #RTRSPN or press PF9 to keep it.
You pressed PF3 without exiting from your login session with the router.
RTRM003 Cursor not on a valid line.
RTRM004SPname must be entered.
RTRM005 Service Point (router) #RTRSPN already managed by #000RT0n.
The service point (router) is being managed by the identified user.
RTRM007 Router command is required.
You pressed Enter without entering a command in the command input area.
RTRM009 Enter PASSWORD.
A password is required to access the service point.
RTRM010 There is no previous PANEL. Please PRESS another KEY.
You pressed the PF7 when 7=BACK was not at the bottom of the panel.
There is no continuation Panel. Please PRESS another KEY.
You pressed the PF8 key when 8=FWD was not at the bottom of the panel.
RTRM014 VTAM Error, #RTRSPN not responding. See the LOG.
The service point is not available to VTAM.
RTRM016 No Command to retrieve.
You have already retrieved the last command in the retrieve queue. There are no more commands to be retrieved.
RTRM018 Bad Return Code returned from RUNCMD. RETCODE =#RETCODE.
An error has occurred with the RUNCMD.
rtrmgr Command
RTRM501 PF key not supported.
Only PF keys shown at the bottom of the panel are supported. You pressed a key that is not supported.
RTRM510 There is no previous PANEL. Please PRESS another KEY.
You pressed the PF7 when 7=BACK was not at the bottom of the panel.
RTRM511 There is no continuation Panel. Please PRESS another KEY.
You pressed the PF8 key when 8=FWD was not at the bottom of the panel.
