|
|
This guide provides the following information:
For a complete and detailed list of CiscoWorks for Windows error messages, explanations, and recommended actions, open the error.wri file by double-clicking on the "Error Messages" icon in your CiscoWorks for Windows program group. Errors are grouped by application. You can search for specific error message strings, and print the entire file or print any portion of the file as needed.
For CiscoWorks for Windows release-specific information, open the readme.wri file by double-clicking on the "Release Note" icon in your CiscoWorks for Windows program group.
This guide is designed for system administrators who are responsible for the initial setup and configuration of routers, access servers, and hubs using Configuration Builder, as well as for the management of these devices through the Show Commands, Health Monitor, and CiscoView applications.
This guide assumes that you are familiar with the basic concepts and terminology used in internetworking, and that you understand your network topology and the protocols you will route. This guide also assumes that you have a working knowledge of the Microsoft Windows environment. If you are running the entire suite of CiscoWorks for Windows applications, you should also be familiar with the HP OpenView environment.
This guide uses the boldface font for commands.
For additional information, refer to the following Cisco Systems publications:
All of these documents are available on Cisco Connection Documentation CD-ROM, Cisco's interactive online library of product information. To order Cisco Connection Documentation CD-ROM or paper documentation, refer to "Ordering Cisco Documentation," which was shipped with your product.
See also your HP OpenView for Windows user guide.
|
Copyright 1988-1995 © Cisco Systems Inc.