Using ClickStart on a Windows 3.11 PC

To use ClickStart on a PC running Windows 3.11, perform the following tasks:

1. Check that the PC has the correct IP address.
   
   
2. Load the ClickStart Install Program for Windows disk in your PC and follow the instructions contained on the Start Here quick reference card included in your router package.
   
   
3. When you have configured the router, set the default gateway to the router's IP address.
   

If you change any of these parameters from previous settings, you must either exit all the TCP/IP applications and restart them, or restart your PC.

<HR>

Use the Web browser's back button and return to the previous menu to continue to configure your router.

Return to ClickStart Home Page