cc/td/doc
hometocprevnextglossaryfeedbacksearchhelp

Table of Contents

What's New with Cisco Documentation CD-ROMs

What's New with Cisco Documentation CD-ROMs

February 1998

This document lists the additions and revisions to the Cisco Documentation CD-ROMs made since the last release. It is divided into three sections: "New Documents," "Revised Documents," and "Getting Assistance."

Note Reinstall the Cisco Documentation CD software each time you receive a new issue of the CDs to ensure that you are always running the latest version.

New Documents

The following documents appear on the Cisco Documentation CDs for the first time:

This document describes how to install the FastHub 112T and FastHub 124T autosensing 10/100-Mbps repeaters, and includes information on rack-mounting, cabling, general guidelines for cabling Ethernet networks, and FastHub technical specifications. This document is located under Cisco Product Documentation: FastHub Repeaters: FastHub 112T and FastHub 124T Hardware Installation Guide.
This document describes the CIP microcode modifications and caveats for the latest version of CIP microcode. It describes specific CIP microcode issues up to and including cip microcode versions 22-26, 24-3 and 25-3. This document is located under Cisco Product Documentation: Cisco IOS: Cisco IOS Release 11.2 and Cisco IOS Release 11.1 and Cisco IOS 11.3: CIP Microcode Release Note and Upgrade Instructions.
This document describes the features and caveats for Cisco IOS Release 11.2, up to and including Release 11.2(11). It is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Release Notes for Cisco IOS Release 11.2.
This document describes the features and caveats for the Cisco uBR7246 universal broadband router that supports Cisco IOS Release 11.3(1). Use this document in conjunction with the Release Notes for Cisco IOS Release 11.3 document. Software caveats listed for Release 11.3 also apply to the Cisco uBR7246.
The Cisco uBR7246 is the first model available in the Cisco uBR7200 series of universal broadband routers. The Cisco uBR7246 is part of a new class of Cisco data-over-cable products designed to allow two-way transmission of digital data over hybrid fiber coaxial (HFC) cable. The Cisco uBR7246 supports Internet Protocol (IP) routing with a wide variety of protocols and any combination of Ethernet, Fast Ethernet, high-speed serial interface (HSSI), and asynchronous transfer mode (ATM) media. The Cisco data-over-cable products, the Cisco uBR7246 universal broadband router and the Cisco cable modem, are compliant with Multimedia Cable Network Partners, Ltd. (MCNS) specifications. MCNS is a consortium of cable television companies whose goal is to create standards for interoperable data over cable systems.
The paths to this document are as follows:

  • Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.3: Product-Specific Release Notes

  • Cisco Product Documentation: Data Over Cable Solutions

This document presents the procedures for adding, removing, or replacing an AC-Input power supply for the Cisco 12008 Gigabit Switch Router. This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document presents the procedures for adding, removing, or replacing a DC-Input power supply for the Cisco 12008 Gigabit Switch Router. This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document provides the international agency compliance, safety, and statutory information applicable to the Cisco 12000 Series Gigabit Switch Router (GSR) products. This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document provides information for installing, configuring, troubleshooting, and maintaining a Cisco 12008 Gigabit Switch Router. This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Installation and Configuration Guide.
This document explains how to install and configure the new Cisco uBR7246 universal broadband router. This document is located under Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Installation and Configuration Guide.
This document explains how to install rack-mount and cable-management brackets on a Cisco uBR7246 universal broadband router and how to install the router in an equipment rack. The paths to this document are as follows:

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

This document explains how to install or replace a 550W AC-input power supply in a Cisco uBR7246 universal broadband router. The paths to this document are as follows:

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

This document explains how to install or replace a fan tray in a Cisco uBR7246 universal broadband router. The paths to this document are as follows:

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

This document provides international agency compliance, safety, and statutory information for wide area network (WAN) interfaces for the Cisco uBR7246 universal broadband router. This document is located under Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router.
This document provides information on Cisco IOS Release 11.3(1); the software release that supports the initial FCS of the Cisco uBR7246 universal broadband router. This document is located under Cisco Product Documentation: Data Over Cable Solutions.
This document covers the features of the Catalyst 1200 series software release 4.29. This document is located under Cisco Product Documentation: Multi-layer LAN Switches: Catalyst 1200 Series Switch: Catalyst Series Workgroup Switch Release Notes: Release Notes for Catalyst 1200 Series Software Release 4.29.
This document explains how to start the Cisco AccessPath-TS3 Integrated Access System for the first time, customize configurations, configure for ISDN and analog calls, and configure security. As options, this document also explains how to configure backhaul interfaces and routing protocols, configure VPDN, configure Multichassis Multilink PPP, and configure a modem. In addition, sample configuration files for each shelf in the AccessPath-TS3 system are included in the appendix. Support for up to 21 Access Server Shelves is provided. This document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco AccessPath Systems: Cisco AccessPath-TS3 Integrated Access System.
These release notes document Cisco Portware Version 2.0.1.7, which supports the MICA 6-port modem modules for the Cisco AS5300 universal access server. The document is located in Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5300: Modem Information: Firmware/Portware Release Notes: MICA.
This document describes Cisco Firmware Version 3.2.10, which supports the 56K 12-port modem modules for the Cisco AS5300 universal access server. Version 3.2.10 introduces V.FC, FAX, Lucent K56flex, and Point of Sale (PoS) support. The paths to this document are as follows:

  • Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5300: Modem Information: Firmware/Portware Release Notes: 56K Microcom

  • Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200: Modem/Terminal Adapter Information: Firmware/Portware Release Notes: 56K Microcom

This document describes the Cisco IOS Release 11.2(10)P feature packs for Cisco AS5300 access servers. (A feature pack is a CD-ROM that contains a Cisco IOS software image and Router Software Loader (RSL), a Windows 95 application that loads the image onto the access server/router.) The paths to this document are as follows:

  • Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Feature Pack Information

  • Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5300: Cisco IOS Software

This document describes the Cisco IOS Release 11.2(10)P feature packs for Cisco AS5200 access servers. (A feature pack is a CD-ROM that contains a Cisco IOS software image and Router Software Loader (RSL), a Windows 95 application that loads the image onto the access server/router.) The paths to this document are as follows:

  • Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Feature Pack Information

  • Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200: Cisco IOS Software

This document describes how to install and configure Cisco 90 Series products, including the Cisco 90i IDSL Channel Unit and the Cisco 90 Series DSL Management Agent. It also contains information on managing subscriber loops. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco 90 Series xDSL Products.
This document, a job aid card, gives a brief description of the Cisco 90i IDSL Channel Unit, how to install and maintain the channel unit, and how to contact Cisco Systems Customer Service. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco 90 Series xDSL Products: Quick Start Guide for Cisco 90i IDSL Channel Unit.
This document, a practice exercize, gives a description of the Cisco 90i IDSL Channel Unit, and includes installation instructions and engineering references. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco 90 Series xDSL Products: D4 Carrier Cisco 90i--IDSL Channel Unit (Practice).
This document provides regulatory compliance and safety information for the Cisco 90 Series DSL Management Agent. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco 90 Series xDSL Products: RCSI for Cisco 90 Series DSL Management Agent.
This document provides regulatory compliance and safety information for the Cisco 90 Series DSL Management Agent. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco 90 Series xDSL Products: RCSI for Cisco 90i IDSL Channel Unit.
This document provides information on how to replace the ROM monitor ROM in the Cisco AS5200. The ROM monitor ROM is an erasable programmable read-only memory (EPROM) that stores the ROM monitor code. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200: Documentation for Spare Parts: Replacing ROM Monitor ROMs in Cisco AS5200 Access Servers.
This document provides information on how to replace the DRAM SIMMs and Flash memory SIMMs in the Cisco AS5200. The AS5200 has two areas of removable DRAM SIMMs: main memory and packet (shared) memory. Additionally, it has two flash memory SIMMs: one stores the system code (software), and the other stores the system boot code. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5200: Documentation for Spare Parts: Replacing Memory Modules in Cisco AS5200 Access Servers.
This document describes new features that are available in Cisco IOS Release 11.2(11)P. You can use this document to learn about and configure these new 11.2(11)P features. This document is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Feature Guide for Cisco IOS Release 11.2 P.
This document describes the requirements and order for installing CWSI with CRM. It also describes how to tune your Windows NT platform for maximum performance. This document is located under Cisco Product Documentation: Network Management: Switched Internetwork Management (CWSI, ATM/TrafficDirector): CiscoWorks for Switched Internetworks (CWSI): CWSI Release 2.1: CWSI 2.1 Release Notes: Installing CWSI with CRM.
This document describes the features and caveats for CWSI Release 2.1 (Windows NT). This document is located under Cisco Product Documentation: Network Management: Switched ATM/TrafficDirector): CiscoWorks for Switched Internetworks (CWSI): CWSI Release 2.1: CWSI 2.1 Release Notes: Release Notes for CWSI Release 2.1 (Windows NT).
This document provides an introduction to Cisco ConfigMaker and describes caveats for using Version 2.0. It provides a list of supported devices (routers, access servers, hubs, switches, network modules, and WICs) and lists caveats related to Cisco IOS software. This document is located under Cisco Product Documentation: Router Configuration Tools: Cisco ConfigMaker: Release Notes for Cisco ConfigMaker.
This document explains the procedures required to install and remove the clock and schedular card (CSC) and the switch fabric card (SFC), which are two types of switch cards used in the Cisco 12008 Gigabit Switch Router (GSR). This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document explains the procedures required to install and remove the fan trays that are used in the Cisco 12008 Gigabit Switch Router (GSR). This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document explains the procedures required to install and remove the cable-management system that is used in the Cisco 12008 Gigabit Switch Router (GSR). This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.
This document explains the procedures required to pack and unpack the Cisco 12008 Gigabit Switch Router (GSR). This document is located under Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes.

Revised Documents

The following documents have appeared on a prior version of the Cisco Documentation CDs, but are now revised:

This document describes the features and caveats for Cisco IOS Release 11.1, up to and including Release 11.1(17). This document is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.1: Release Notes for Cisco IOS Release 11.1.
This document describes the features and caveats for the Cisco 12000 series Gigabit Switch Routers (GSR) that support Cisco IOS Release 11.2(9)GS6. Cisco IOS Release 11.2(9)GS6 is based on Cisco IOS Release 11.2(9)P. In addition, Release 11.2(9)GS6 has fixes to software defects and support for new features not in 11.2(9)GS.
The Cisco 12000 series is a new product class of GSRs that perform Internet routing and switching at gigabit speeds. The Cisco 12000 series meets the exponential growth in demand for Internet bandwidth and brings scalability and high-performance services to IP-based networks. Designed to meet current and future Internet traffic requirements, the Cisco 12000 series initially supports IP backbone links at OC-3/STM-1 (155 Mbps) and OC-12/STM-4 (622 Mbps)--facilities up to four times faster than those used today.
The paths to this document are as follows:

  • Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Product-Specific Release Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco IOS Software Release Notes and Documentation

This release note describes the features and caveats for the Cisco 7000 family of routers that support Cisco IOS Release 11.2 P, up to and including Release 11.2(11)P. For detailed software configuration information on the new features and Cisco IOS commands supported by Release 11.2 P, refer to the Feature Guide for Cisco IOS Release 11.2 P. The paths to this document are as follows:

  • Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Product-Specific Release Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco IOS Software Release Notes and Documentation

This document (formerly titled Cisco 7200 Series Input/Output Controller Replacement Instructions) explains how to remove and replace Input/Output controllers that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information on the new I/O controller (product number C7200-I/O-FE) and the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document (formerly titled Cisco 7200 Series Network Processing Engine Replacement Instructions) explains how to remove and replace network processing engines that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information about the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document (formerly titled Cisco 7200 Series Memory Replacement Instructions) explains how to replace the main, Flash, and ROM monitor memory on the Input/Output controllers and network processing engines that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information on the new I/O controller (product number C7200-I/O-FE) and the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document explains the port adapter hardware configuration guidelines for the Cisco 7200 series routers. This document has been revised to include information specific to Cisco IOS Software Release 11.3 T and new port adapters that are available for the Cisco 7204 and Cisco 7206 routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

This document provides international agency compliance, safety, and statutory information for wide area network (WAN) interfaces for the Cisco 7200 series routers. This document has been revised to include information about new port adapters that are available for the Cisco 7204 and Cisco 7206 routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206

This document (formerly titled Cisco 7200 Series Input/Output Controller Replacement Instructions) explains how to remove and replace Input/Output controllers that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information on the new I/O controller (product number C7200-I/O-FE) and the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document (formerly titled Cisco 7200 Series Network Processing Engine Replacement Instructions) explains how to remove and replace network processing engines that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information about the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document (formerly titled Cisco 7200 Series Memory Replacement Instructions) explains how to replace the main, Flash, and ROM monitor memory on the Input/Output controllers and network processing engines that are used in the Cisco 7200 series routers and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information on the new I/O controller (product number C7200-I/O-FE) and the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document explains how to install the cables used on the PA-H and PA-2H port adapters. These port adapters are used in the Cisco 7000 series, Cisco 7200 series, Cisco 7500 series, and Cisco 4000 series routers, and the newly released Cisco uBR7246 universal broadband routers. This document has been revised to include information on the Cisco uBR7246 universal broadband routers. The paths to this document are as follows:

  • Cisco Product Documentation: Access Servers and Access Routers: Modular Access Routers: Cisco 4000 Series (4000/4500/4700/4000-M/4500-M/4700-M): Cisco 4000 Series Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7000: Versatile Interface Processor (VIP) Hardware Documentation: Second-Generation Versatile Interface Processor (VIP2) Documentation

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7010: Versatile Interface Processor (VIP) Hardware Documentation: Second-Generation Versatile Interface Processor (VIP2) Documentation

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7505: Versatile Interface Processor (VIP) Hardware Documentation: Second-Generation Versatile Interface Processor (VIP2) Documentation

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7507: Versatile Interface Processor (VIP) Hardware Documentation: Second-Generation Versatile Interface Processor (VIP2) Documentation

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7513: Versatile Interface Processor (VIP) Hardware Documentation: Second-Generation Versatile Interface Processor (VIP2) Documentation

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7204: Cisco 7204 Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 7206: Cisco 7206 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Configuration Notes

  • Cisco Product Documentation: Data Over Cable Solutions: Cisco uBR7246 Universal Broadband Router: Cisco uBR7246 Configuration Notes

This document explains how to install and configure the new WS-X5166 ATM Dual PHY DS3 module. This document is located under Cisco Product Documentation: Multi-layer LAN Switches: Catalyst 5000 Series Switches: 5002, 5000, 5505, 5500: Catalyst 5000 Series Configuration Notes: Catalyst 5000 Series ATM Modules Configuration Note.
This document was revised to add LED, cable, and configuration information. The document is located under Cisco Product Documentation: Access Servers and Access Routers: Access Servers: Cisco AS5300: Documentation for Spare Parts.
This document describes the Cisco IOS Release 11.2(11)P feature packs for Cisco 1600 series routers. This document is located under Cisco Product Documentation: Cisco IOS Configuration: Cisco IOS Release 11.2: Feature Pack Information: Release Notes for Cisco IOS 11.2(11) Feature Packs Cisco 1600.
This document describes the Cisco IOS Release 11.2(11)P feature packs for Cisco 2500 series routers. This document is located under Cisco Product Documentation: Cisco IOS Configuration: Cisco IOS Release 11.2: Feature Pack Information: Release Notes for Cisco IOS 11.2(11) Feature Packs Cisco 2500.
This document was revised to include the following new features for Release 11.2(8.0.1): FC-PFQ (a new feature card for the ASP), closed user groups (CUGs), access lists on ILMI registration, ATM soft restart, ATM accounting enhancements, signaling diagnostics and MIB, and the supplemental AToM MIB. This document is located under Cisco Product Documentation: ATM Adapters and Switches: LightStream 1010 ATM Switch Release WA4 Documents: LightStream 1010 ATM Switch Release 11.2(8.0.1)Documents.
This document has been revised to include information about Cisco ConfigMaker Version 2.0. The document describes how to install and use Cisco ConfigMaker, a wizards-based software tool that helps you to easily configure and address Cisco routers, access servers, hubs, switches, and networks. This document provides a list of major software features, enhancements made to Version 2.0, and step-by-step procedures for creating networks and configuring supported devices. This document is located under Cisco Product Documentation: Router Configuration Tools: Cisco ConfigMaker: Getting Started with Cisco ConfigMaker.
This document provides updates and new information about the AccessPath-TS3 Integrated Access System for Cisco IOS Release 11.2 P. This document is located under Cisco Product Documentation: Access Servers and Access Routers: Cisco AccessPath Systems: Cisco AccessPath-TS3 Integrated Access System: Release Notes - AccessPath-TS3 System, Cisco IOS 11.2(10).
This document provides updates and new information about the Cisco 4000 Series for Cisco IOS Release 11.2. This document is located under Cisco Product Documentation: Access Servers and Access Routers: Modular Access Routers: Cisco 4000 Series (4000/4500/4700/4000-M/4500-M/4700-M ): Release Notes - Cisco 4000 Series Routers.
This document provides updates and new information about the Cisco 4000 Series for Cisco IOS Release 11.2 P. This document is located under Cisco Product Documentation: Access Servers and Access Routers: Modular Access Routers: Cisco 4000 Series (4000/4500/4700/4000-M/4500-M/4700-M ): Release Notes - Cisco 4000 Series Routers.
This document was revised to include new caveat information for maintenance Release 11.2(11) and 11.2(11)P. No new features were introduced in this release. However, this document was enhanced to describe the features Modem Pooling and Web Cache Control Protocol for the Cisco AS5200. See the section "New Features for Release 11.2(10)P." Additionally, the sections "Related Documentation" and "Online Navigation" were revised. This document is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Product-Specific Release Notes: Release Notes - Cisco AS5200 and Cisco AS5100 Access Servers.
This document was revised to include new caveat information for maintenance Release 11.2(11)P. No new features were introduced in this release. However, this document was enhanced to describe the features Digital Modem Network Modules and Web Cache Control Protocol for the Cisco 3600 series. See the section "New Features for Release 11.2(10)P." Additionally, the sections "Related Documentation" and "Online Navigation" were revised. This document is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Product-Specific Release Notes: Release Notes for Cisco 3600 Series Routers.
This document was revised to include new caveat information for maintenance Release 11.2(11)P. No new features were introduced in this release. However, this document was enhanced to describe the features Modem Pooling, E1 R2 Register Signaling, Channelized E1 Signaling for the Cisco AS5300, Robbed Bit Signaling for the Cisco AS5300, Quad E1 PRI for the Cisco AS5300, and Bundled Modem Code. See the section "New Features for Release 11.2(10)P." Additionally, the sections "Related Documentation" and "Online Navigation" were revised. This document is located under Cisco Product Documentation: Cisco IOS Software Configuration: Cisco IOS Release 11.2: Product-Specific Release Notes: Release Notes - Cisco AS5300 for IOS Rel 11.2(11)P.
This document explains the procedures required for upgrading or replacing memory in the Cisco 12000 Series Gigabit Route Processor (GRP) and the Cisco 12000 series line cards. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12012 Gigabit Switch Router: Cisco 12000 Series Configuration Notes

This document describes the Gigabit Route Processor (GRP), which is used in the Cisco 12000 series of Gigabit Switch Routers. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12012 Gigabit Switch Router: Cisco 12000 Series Configuration Notes

This document explains the procedures required for installing and configuring the Cisco 12000 series OC-12c/STM-4c ATM line card. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12012 Gigabit Switch Router: Cisco 12000 Series Configuration Notes

This document explains the procedures required for installing and configuring the Cisco 12000 series OC-12c/STM-4c POS line card. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12012 Gigabit Switch Router: Cisco 12000 Series Configuration Notes

This document explains the procedures required for installing and configuring the Cisco 12000 series Quad OC-3c/STM-1c POS line card. The paths to this document are as follows:

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12008 Gigabit Switch Router: Cisco 12008 GSR Configuration Notes

  • Cisco Product Documentation: Core/High-End Routers: Cisco 12012 Gigabit Switch Router: Cisco 12000 Series Configuration Notes

Getting Assistance

To report a problem with the Cisco Documentation CD-ROMs or to receive technical support, contact the Technical Assistance Center between 5:00 a.m. and 6:00 p.m. Pacific time, Monday through Friday (excluding company holidays).

U.S. Technical Assistance Center numbers:

800 553-2447

Fax:

408 526-8898

408 526-7209

E-mail:

tac@cisco.com

Cisco Systems and its European Service Partners coordinate all customer service in Europe, including hardware and software telephone technical support, onsite service, and module exchange and repair. For more information, contact the European Technical Assistance Center.

European Technical Assistance Center numbers:

32 2 778 42 42

Fax: 32 2 778 43 00

E-mail: euro-tac@cisco.com

hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1998 © Cisco Systems Inc.