|
|
Cisco's AccessPath-TS3 integrated access system is designed to meet the demands of rapidly growing Internet service providers (ISPs), telecommunications carriers, and other network service providers who offer managed Internet connections. The AccessPath system also provides a ready solution for large enterprises as they expand their intranet requirements to include dial access.
Cisco's AccessPath-TS3 leverages Cisco dial access stacking architecture (DASA) to offer its customers a carrier-class dial system, with unprecedented levels of capacity, density, and performance.
As the newest member in a family of integrated solutions, AccessPath-TS3 provides an immediate solution for dial points of presence (POPs) in a single, complete system. It leverages the high-density, high-performance, AS5300 dial platform and Cisco's industry-leading routing and switching products to ensure cost-effective scalability from 192 to 2016 (3*T3) port capacity in North America and 240 to 2520 port capacity in worldwide E1 configurations, accommodating rapid growth in network demand as well as geographic reach. Looking ahead, AccessPath-TS3 was designed to accommodate double the current density, offering a smooth migration to next-generation AccessPath systems scalable beyond 5000 port capacity. AccessPath-TS3 offers breakthroughs in density and scalability, while continuing to provide the rich set of Cisco IOSTM services. To complement the AccessPath-TS3, Cisco offers a full spectrum of life cycle-focused support solutions. The Cisco support portfolio features start-up, maintenance, marketing, advanced, and custom solutions to maximize and protect customers' investments.
Table 10-124 lists the features and benefits available with the Cisco AccessPath-TS3.
| Description | AccessPath-TS3 |
|---|---|
| Processor Type:
Dial access server shelf Router shelf System controller shelf Switch shelf |
150-Mhz R4700 (per four T1/E1/PRI) MIPS4700 @ 150 Mhz 100-Mhz IDT RISC 68040 |
| Main Memory:
Dial access server shelf Router shelf System controller shelf Switch shelf |
16M main DRAM, and 16M packet DRAM 1M processor SRAM, with 64 DRAM 16M DRAM 8M |
| Flash Memory:
Dial access server shelf Router shelf Fail-safe management processor shelf Switch shelf |
8M 20M 8M 4M |
| Trunk Interfaces: | Up to 84 T1/E1*/PRI for dial clients
Also supports CT3 *Integrated R2 |
| Modems/ISDN session (any call can be either async or ISDN) | E1 system:240-2520
T1 system:192-2016 |
| Backhaul Interfaces | Fast Ethernet, FDDI, ATM, HSSI, V.35 serial, 100VG-AnyLAN, Token Ring, 10BaseT, 10BaseFL (multiple supported for redundant configurations) |
| Specification | AccessPathTS-3 |
|---|---|
| Input Watts (MAX):
Dial access server shelf Router shelf System controller shelf Switch shelf |
420W (per shelf) 392W (per shelf) 140W 201W |
| AC Input Voltage: | 100- 240 VAC |
| Frequency | 50- 60 Hz |
| AC Input Current:
Dial access server shelf Router shelf System controller shelf Switch shelf |
6.0A @ 110 VAC 5.0A @ 110 VAC 2.5A @ 110 VAC 2.3A @ 110 VAC |
| DC Input Voltage: | -48 VDC nominal |
| DC Input Current:
Dial access server shelf Router shelf Fail-safe management processor shelf Switch shelf |
6.0A max @-48 VDC 8.5A max @-48 VDC 1.16A max @-48VDC 11.0A max @-48 VDC |
| Operating temperature: | 32 to 104×F (0 to 40×C) |
| Nonoperating temperature: | -4 to 149×F (-20 to 65×C) |
| Operating relative humidity: | 10 to 85%, noncondensing |
| Nonoperating relative humidity: | 5 to 95%, noncondensing |
| Products | Product Numbers | Comments |
| SP Base Support - SW | SP-SW-XXXX | TAC Support, CCO Access, IOS SW Support and Upgrade |
| Advance Replacement 8x5xNBD - AR1 | SP-AR1-XXXX | Next business day response |
| Advance Replacement 8x5x4 - AR2 | SP-AR2-XXXX | Same business day, 4 hour response |
| Advance Replacement 24x7x4 - AR3 | SP-AR3-XXXX | 7 days a week, 24 hours a day, 4 hour response |
| Onsite Support 8x5xNBD - OS1 | SP-OS1-XXXX | Onsite, next business day |
| Onsite Support 8x5x4 - OS2 | SP-OS2-XXXX | Onsite, same business day, 4 hour response |
| Onsite support 24x7x4 - OS3 | SP-OS3-XXXX | 7 days a week, 24 hours a day, 4 hour response |
| Product | Description | Service Product # |
| AP530 | AP530 AccessPath System | SP-DEP-AP |
| Product | Description | Service Product # |
| AP-NM-001 | Cisco NMS S/W | SP-SW-APNM1 |
Documentation includes installation guide and all of the operations manuals for the shelves that comprise the AccessPath system.
| Product Number | Description |
|---|---|
| Dial Shelves | |
| AP5301S | AccessPath 5301 chassis, memory |
| Power Configuration | (required) |
| AP53-AC-PWR | AC Power Option, AP5301 |
| AP53-DC-PWR | DC Power Option, AP5301 |
| Ingress | (required) |
| AP53-4CT1 | Quad T1/PRI Card |
| AP53-4CE1 | Quad E1/PRI Card |
| Modem Options | (optional) |
| AP53-96M | 92 Modem Card |
| AP53-108M | 108 Modem Card |
| AP53-120M | 120 Modem Card |
| Modem Options | |
| MEM-16F-AS53 | AS5300 System Flash Upgrade (from 8MB to 16MB) |
| MEM-64M-AS53 | AS5300 Main DRAM Upgrade (from 32MB to 64MB) |
| MEM-8BF-AS53 | AS5300 Boot Flash Upgrade (from 4MB to 8MB) |
| Router Shelves | |
| AP3-7206S | AccessPath 7206 Router Shelf, AC Power, with PA-12E/2FE |
| AP3-7206S-DC | AccessPath 7206 Router Shelf, DC Power, with PA-12E/2FE |
| Router Backhaul | |
| PA-H | 1 HSSI port |
| PA-2H | 2 HSSI ports |
| PA-A1-OC3SM | 1 port ATM (OC-3 rate) single-mode, single-width port |
| PA-A1-OC3MM | 1 Port ATM (OC-3 rate) multi-mode |
| PA-100VG | 100-Mbps AnyLAN (voice grade) |
| PA-4E | 4-Port Ethernet 10BaseT Port adapter |
| PA-8E | 8-Port Ethernet 10BaseT Port adapter |
| PA-5EFL | 5-Port Ethernet 10BaseFL Port adapter |
| PA-FE-TX | 1 Fast Ethernet 100BaseTx port adapter |
| PA-FE-FX | 1 Fast Ethernet 100BaseFx port adapter |
| PA-4T | 4 synchronous serial ports |
| PA-8T-V35 | 8 port serial adapter V.35 |
| PA-8T-X21 | 8 port serial adapter- X.21 |
| PA-8T-232 | 8 port serial adapter-V.35 |
| PA-4R | 4 Token Ring ports |
| PA-4R-FDX | 4 Token Ring ports, full-duplex |
| PA-F-MM | 1 FDDI multimode |
| PA-F-SM | 1 FDDI single-mode |
| PA-F/FD-MM | 1 full-duplex FDDI multimode |
| PA-F/FD-SM | 1 full-duplex FDDI single-mode |
| Switching Shelves | |
| PA-12E/2FE | AccessPath 7206 Switching Port Adapter |
| AP-C5002S | AccessPath Cat 5002 External Switch Interconnect |
| AP-C5002S-DC | AccessPath Cat 5002 External Switch Interconnect DC
* available in March **see appendix 3 for Cat 5000 alternative |
| System Controller | |
| AP-3640S | AccessPath 3640 System Controller AC Power |
| AP-3640S-DC | AccessPath 3640 System Controller DC Power |
| Rack Assembly | |
| AP-7XRACK | Rack for up to 12 dial shelves w/ wiring harness |
| AP-7XRACK/2 | Second rack for systems greater than 12 dial shelves |
| AP-INT | Hardware Integration into rack |
| Patch Panel | |
| FRAP-PP-RJ45 | RJ45 Patch Panel |
| FRAP-PP-WW | Wire Wrap Patch Panel |
| DC Fuse Panel | |
| AP-DC-PANEL= | DC Fuse Panel for AccessPath |
| Technology License | (optional, choose one per 5300 dial shelf) |
| FRAP-MMTL-96 | 96 Modem Management Technology License |
| FRAP-MMTL-108 | 108 Modem Management Technology License |
| FRAP-MMTL-120 | 120 Modem Management Technology License |
| Configuration Options | |
| Basic Configurations | (choose one) |
| FRAP3-T1-PRI-1-SC | T1 PRI |
| FRAP3-T1-CT1-1-SC | Channelized T1 |
| FRAP3-E1-PRI-1-SC | E1 PRI |
| FRAP3-E1-CE1-1-SC | Channelized E1 |
| IOS Configurations | (choose one) |
| FRAP3-IP-PLUS | IP Plus IOS on all components |
| FRAP3-ENTERPRISE | Enterprise IOS on all components |
| Advanced Configurations | (optional) |
| FRAP3-MMP | MMP Enabled |
| FRAP3-VPDN | VPDN Enabled |
| Custom Configurations | (optional) |
| FRAP3-CUSTOM-SC | Customized Customer Configuration |
| Network Management | (highly recommended) |
| AP-NM-001 | AccessPath Network Management Software |
| Additional Cables | (optional, see appendix 1) |
| Maintenance Services | (optional, see appendix 1) |
1 AP-7XRACK Rack w/ wires 1 AP-7XRACK/2 2nd Rack w/ wires 1 AP-INT Integration for rack 1 AP3640S System Controller 1 AP-C5002S Switch Port Adapter 21 AP5301S 5300 dial shelves 21 AP53-AC-PWR 5300 AC power 21 AP53-4CT1 Quad T1/PRI Card 21 AP53-96M 96 Modem Card 2 AP3-7206S Primary Router 2 PA-FE-TX FE backhaul * 2 PA-A1-OC3MM ATM backhaul 1 FRAP3-T1-PRI-1-SC Configuration 1 FRAP3-MMP MMP Enabled 1 FRAP3-VPDN VPDN Enabled 1 FRAP3-IP-PLUS IP Plus IOS 1 AP-NM-001 AccessPath Manager 21 FRAP-MMTL-96 Modem Technology License 1 SP-DEP-AP Advanced Installation 1 SP-AR3-AP3-7206 Hardware Advance 1 SP-AR3-APC5002 Hardware Adv 24 x 7 x 4 1 SP-AR3-AP530 Hardware Adv 24 x 7 x 4 21 SP-AR3-AP53XX Hardware Adv 24 x 7 x 4 1 SP-SW-APNM1 Support for APM
1 AP-7XRACK Rack w/ wires 1 AP-7XRACK/2 2nd Rack w/ wires 1 AP-INT Integration for rack 1 AP3640S System Controller 1 AP-C5002S Switch Port Adapter 21 AP5301S 5300 dial shelves 21 AP53-AC-PWR 5300 AC power 21 AP53-4CE1 Quad E1/PRI Card 21 AP53-120M 120 Modem Card 2 AP3-7206S Primary Router 2 PA-FE-TX FE backhaul * 2 PA-A1-OC3MM ATM backhaul 1 FRAP3-E1-PRI-1-SC Configuration 1 FRAP3-MMP MMP Enabled 1 FRAP3-VPDN VPDN Enabled 1 FRAP3-IP-PLUS IP Plus IOS 1 AP-NM-001 AccessPath Manager 21 FRAP-MMTL-120 Modem Technology License 1 SP-DEP-AP Advanced Installation 1 SP-AR3-AP3-7206 Hardware Advance 1 SP-AR3-APC5002 Hardware Adv 24 x 7 x 4 1 SP-AR3-AP530 Hardware Adv 24 x 7 x 4 21 SP-AR3-AP53XX Hardware Adv 24 x 7 x 4 1 SP-SW-APNM1 Support for APM
|
|