This appendix lists other documents that you might find helpful in your installation, troubleshooting, and management of the CiscoSecure Access Control Server (ACS) software.
- CiscoSecure ACS 2.1.2 for UNIX User Guide Release Notes
For more information about router software configuration, refer to the following publications for Cisco IOS Release 11.0 and earlier:
- Configuration Builder Getting Started Guide
- CiscoWorks for Windows Getting Started Guide
- Internetworking Technology Overview
- Router Products Configuration Guide
- Router Products Command Reference
- Troubleshooting Internetworking Systems (as needed)
For Cisco IOS Release 11.1 and later, refer to the following publications:
- Configuration Fundamentals Configuration Guide
- Configuration Fundamentals Command Reference
- Network Protocols Configuration Guide
- Network Protocols Command Reference
- Remote Node and Terminal Services Configuration Guide
- Remote Node and Terminal Services Command Reference
- Wide-Area Networking Configuration Guide
- Wide-Area Networking Command Reference
- Standard Network Protocols Command Reference
- Standard Network Protocols Configuration Guide
For more information about the protocol that helps govern CiscoSecure ACS software, refer to the following documents (not published by Cisco):
- REGEXP.3 man page (UNIX SED man page)
- RFC1334, PPP Authentication Protocols
- RFC1661, The Point-to-Point Protocol (PPP)
- RFC2058 and RFC2059, RADIUS Protocol Definition
- TACACS+ API Specification, Version 1.30
- TACACS+ Protocol Specification, Version 1.58
- TACACS+ Protocol Specification, Version 1.75
