cc/td/doc
hometocprevnextglossaryfeedbacksearchhelp
PDF

Table of Contents

Fast Ethernet Solutions

Fast Ethernet Solutions

FastHub100 Series Repeaters

Feature FastHub 104T FastHub 108T FastHub 116F
Ports 4-100BaseTX 8-100BaseTX 16-100BaseFX
Configuration Standalone, unmanaged Standalone, unmanaged Standalone, unmanaged
ASIC Cisco-designed Cisco-designed Cisco-designed
Connectors RJ-45 RJ-45 RJ-45
Cable Type Category 5 UTP Category 5 UTP Category 5 UTP
Forwarding Rate 100 Mbps 100 Mbps 100 Mbps
Per Port LEDs Link Integrity, Receive, Disabled Link Integrity, Receive, Disabled Link Integrity, Receive, Disabled
System Activity Meter LEDs -- -- Yes
10BaseT Connectivity None None None
Special Characteristics

  • Automatically partitions jabbering ports

  • 100BaseT Class II repeater design for direct interconnection of two hubs

  • No software to load or configure

  • LEDs for hub and RPS status (FastHub 116T only)

FastHub 200 Series Repeaters

Feature FastHub 216T
Ports 16-100BaseFX
Configuration Standalone, managed
ASIC Cisco-designed
Connectors RJ-45
Cable Type Category 5 UTP
Forwarding Rate 100 Mbps
Per Port LEDs Link Integrity, Receive, Disabled
System Activity Meter LEDs Yes
10BaseT Connectivity None
Special Characteristics

  • Integrated management via Telnet, out-of-band console, and CiscoView software on a per-port and per-hub basis

  • 100BaseT Class II repeater design for direct interconnection of two hubs

  • LEDs for hub and RPS status

FastHub 300 Series Repeaters

Feature FastHub 316T FastHub 316C
Ports 16-100BaseTX 15-100BaseTX, 1-100BaseFX
Configuration Modular, stackable, manageable Modular, stackable, manageable
ASIC Cisco-designed Cisco-designed
Connectors RJ-45 RJ-45, SC
Cable Type Category 5 UTP Category 5 UTP, SC
Forwarding Rate 100 Mbps 100 Mbps
Per Port LEDs Link Integrity, Receive, Disabled Link Integrity, Receive, Disabled
System Activity Meter LEDs Collision and utilization Collision and utilization
10BaseT Connectivity Yes (via BMM) Yes (via BMM)
Special Characteristics

  • Two expansion slots per base unit house a 16-port expansion module and either a Bridge Management Module (BMM) or Network management Module (NMM)

  • 100BaseT Class II design for direct interconnection of 2 hubs or stacks (up to 254 ports)

  • Manageable (SNMP and RMON) via Telnet, out-of-band console, and CiscoView software on a per-port, per-hub, and per-stack basis

  • LEDs for hub ID, hub status, and RPS status


hometocprevnextglossaryfeedbacksearchhelp
Copyright 1989-1997 © Cisco Systems Inc.